crypto: digest: Fix digesting over memory chunks > 4096 bytes ...

There are two different cases that are handled in digest_file_window:

 a) the file to digest is memmappable (e.g. /dev/mem)
 b) it isn't (e.g. files in /)

In both cases a file is digested in hunks of (up to) 4096 bytes. After
each hunk in b) the buffer that is fed to digest_update() is then
overwritten using read() to get the next hunk to digest. In case a)
however it was forgotten to step forward in the buffer and instead the
same data was handed to digest_update() again and again.

So to fix that increase buffer by the number of bytes already digested
for case a) which is characterized by flags == 0.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

gpio: fix null pointer exception when there is no oftree ...

In a system with oftree support enabled but with no oftree the
of_gpiochip_scan_hogs() would fail due to device_node equals NULL.

Check device_node and return with 0 in this situation, as this
mirrors what would have happened before we added support for gpio-hogs.

Use IS_ENABLED(CONFIG_OFDEVICE) to teach compiler to leave
out the of_* specific functions if not needed.

Fixes: 37e6bee7 ("gpiolib: Add support for GPIO "hog" nodes")
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

clk: fix clk_get error handling ...

If there is no OFTREE support of_clk_get_by_name failed with
-ENOENT, which caused clk_get to bail out.
This had the effect that nothing was printed on the serial console
with at91sam9263-ek.

There are no error paths that will return -ENODEV as we test for today,
so change this to -ENOENT which is in use.
This allows us to contine with clk_get_sys() in case of other
errors as was the intention of the original fix.

Fixes: 90f7eacb ("clk: let clk_get return errors from of_clk_get_by_name")
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Revert "param: fix stub prototype of dev_add_param" ...

This reverts commit 441941f, which was on
top of the recently reverted nvvar rework, so needs to be reverted, too.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Merge branch 'for-next/state'

Merge branch 'for-next/ratp'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

Merge branch 'for-next/clk'

Merge branch 'for-next/arm'

Release v2017.07.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

enable LFS support for host programs ...

This fixes building on an XFS partition on a 32 bit machine:

	$ armmake -C ~/gsrc/barebox O=$PWD imx_defconfig
	  HOSTCC  scripts/basic/fixdep
	fixdep: error fstat'ing depfile: scripts/basic/.fixdep.d: Value too large for defined data type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: mvebu: describe -n more accurately in the sphinx document ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts/kwboot: document -n option ...

This was forgotten in the commit that added support for that option

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: remove unused fpgaintf setup ...

The disable bits for the ethernet interfaces between FPGA and HPS are read
and configured, but never written back.
The configuration itself doesn't make that much sense however. So instead of
writing it back to the register, remove the whole read-modify operation altogether.

Reported-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: boards: phytec-som-am335x: Update boot scripts ...

Expand the boot scripts by eMMC and clean them up.
Add NV variable files and removed unnecessary kernel bootargs from the
boot scripts.
Add "rootflags='data=journal'" bootarg to SD card boot script.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: Fix error printing ...

Presumably the code wanted to print the error with the %d format
specifier. Actually pass the error code by using PTR_ERR() and not
IS_ERR(). While at it use %ld to print a unsigned long variable to
get rid of a compiler warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: phytec-phycore-omap4460: Fix compiler warning ...

Use IS_ENABLED() rather than #ifdef to get rid of unused variable
warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Make locally used function canonicalize_dir() static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: at91: Bail out if atmel,pins property does not exist ...

Do not blindly assume that a device node has a atmel,pins property.
Instead, test it for being NULL before using it. This also silences
a compiler warning when the driver is compiled without OF support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.12-rc7 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.12-rc6 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: i.MX6: fix usdhc3 pinmuxing on tqma6x ...

The usdhc3 pin group wrongly referred the SD4 pads instead of the SD3 pads.
This leads to issues when muxing the SD4_CMD and SD4_CLK pads for uart3.

This regression was introduced by code refactoring in commit a5207a6 ("ARM:
dts: i.MX6: drop usage of pin group defines").

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: user close may happen in SYN-RECEIVED state ...

The reference says:

     5.2.3. SYN-RECEIVED
     ...
     Departures
       - A CLOSE request is made by the user.  Create a packet with
         FIN set.  Send it and go to the FIN-WAIT state.

Add this missing step.

Probably not a real usecase for barebox anyway as there is no user
triggered close.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: consolidate setting the next AN or SN flags ...

Setting the next AN or SN flag was being done in two different ways
throughout the code; e.g. here for AN:

    ratp_set_an(ratp_sn(hdr) + 1);
or:
    ratp_set_an(!ratp_sn(hdr));

We define a pair of new ratp_set_next_sn() and ratp_set_next_an()
macros that make it clear that the next value is desired, and also
hide the computation of the actual flag value within the macro, so the
previous example would now look like:

    ratp_set_next_an(ratp_sn(hdr));

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: don't ignore data that may arrive in behaviour H1 ...

If an input packet arrives H1 that has data in it, we need to:
  * track sn_received
  * if we have data pending, send it
  * if we don't have data pending, send a plain ACK

This process, as noted in RFC916, is the same as the I1 procedure, so
go and run it:

     Go to the ESTABLISHED state and execute procedure I1 to process
     any data which might be in this packet.

This fix allows the peer to queue data in the last packet doing the
connection establishment. It doesn't apply to the barebox<->bbremote
interaction because bbremote won't queue data until the connection is
completely established, but it allows third party ratp implementations
to do that.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: send initial data in behaviour B if any pending ...

And also, use ratp_send_ack() instead of manually constructing an ACK
if no data is pending to be sent.

The current barebox implementation doesn't allow any queueing of data
until the connection is established, so this is probably not a case
that would get run anyway.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>