LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2013-06-02	619fdd0 Browse files » Merge branch 'for-next/cfi' Sascha Hauer committed on 2 Jun 2013
	5e7f855 Browse files » Merge branch 'for-next/block' Sascha Hauer committed on 2 Jun 2013
	b27af5c Browse files » partition: DOS: Add parameter for the NT disk Signature ... The NT disk Signature is a unique 32-bit value in the MBR allowing to identify a MSDOS partitioned disk. The signature can be used to specify the Linux rootfs. This patch adds support for the NT disk Signature in the form of a device parameter which can both be read and written. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Jun 2013
	5014bf0 Browse files » partitions: Add missing depends on BLOCK ... The disk partitions use blockdevice functions, so add the corresponding depends on BLOCK. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Jun 2013
	e08e2fa Browse files » Merge branch 'for-next/at91' Sascha Hauer committed on 2 Jun 2013
	70d793e Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 2 Jun 2013
	df1dcc0 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 2 Jun 2013
	v2013.06.0 b341486 Browse files » Release v2013.06.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Jun 2013
	9bdc300 Browse files » Enables to build bootm command on generic_x86. ... I'm not sure but I guess we don't need defined(__I386__) check. I kept it for now. Signed-off-by: Masaki Muranaka <monaka@monami-ya.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masaki Muranaka authored on 1 Jun 2013 Sascha Hauer committed on 2 Jun 2013
	bee7cd3 Browse files » Avoid build error on "config SPI" is y ... In case he configures with make ARCH=x85 menuconfig, config SPI will be set to "y". And he will got an error on spi.h. Signed-off-by: Masaki Muranaka <monaka@monami-ya.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Masaki Muranaka authored on 1 Jun 2013 Sascha Hauer committed on 2 Jun 2013
2013-05-31	e82e405 Browse files » block: implement block_read/block_write functions ... Some drivers use blk->ops->read/write. This bypasses the caching block layer and was never intended like this. The upper API to the block layer is the cdev layer. This patch adds block_read and block_write functions and uses them where appropriate. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 May 2013
	b5c4e23 Browse files » block: rename file operation functions ... block_read and block_write collide with a to-be-introduced global function, so rename the file operation functions. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 May 2013
	f79343d Browse files » block: remove unused read_start and read_done ops ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 May 2013
	81118f1 Browse files » ARM: Using unsigned specifiers for unsigned arguments for printf ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 28 May 2013 Sascha Hauer committed on 31 May 2013
	b381e78 Browse files » treewide include/: Add missing includes ... This adds several missing includes to files under include/ which we relied on being included implicitly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 May 2013
2013-05-30	bd43d2f Browse files » ARM: pbl: Always call pbl make ... We always must decend into the pbl build. Otherwise it doesn't get rebuilt if only sourcefiles from the pbl are changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
2013-05-30	c7cf773 Browse files » ARM: i.MX53 vincell: Fix lowlevel startup ... This is a i.MX53 board, not i.MX51. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
2013-05-27	0d7ac7c Browse files » mtd: call mtd_erase with complete area if possible ... If a device does not have bad blocks loop over the eraseblocks in the driver instead of the core. This allows the mtd_dataflash driver to erase blocks instead of pages to gain more speed during erasing. Also the mtd_dataflash driver modifies the erase_info struct which causes the outer loop in the core to never end. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	ecceaac Browse files » cfi: make hardware device parent of mtd device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	736f711 Browse files » cfi: Add dev * to flash_info and switch to dev_* ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	6d7cd20 Browse files » cfi: remove unused field from struct flash_info ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	3ece590 Browse files » net: fec_imx: default phy address to -1 for dt probe ... To enable automatic probing of the phy. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	24b9ea6 Browse files » cfi_flash: size_ratio should not be 0 ... We will get size = 0 if size_ratio = 0 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 May 2013 Sascha Hauer committed on 27 May 2013
	fbf9d87 Browse files » cfi_flash: add shift option for some cfi memory chips ... Many cfi chips support 16 and 8 bit modes. Most important difference is use of so called "Q15/A-1" pin. In 16bit mode this pin is used for data IO. In 8bit mode, it is an address input which add one more least significant bit (LSB). In this case we should shift all adresses by one: For example 0xaa << 1 = 0x154 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 May 2013 Sascha Hauer committed on 27 May 2013
	aac2c84 Browse files » ARM i.MX53: tqma53: fix console entry ... The default baseboard for the tqma53 (MBa53) uses UART2 for debug console. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 27 May 2013 Sascha Hauer committed on 27 May 2013
2013-05-25	f2669c8 Browse files » ARM: zynq: Add cmd to generate zynq image ... Add a command to generate the zynq image instead of generating it directly. This causes a rebuild exactly when necessary and prints a "ZYNQ-IMG" to the commandline during compilation. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2013
	9545325 Browse files » make: Add barebox_default_env.* to targets ... Otherwise it gets rebuilt everytime. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2013
	6d9809f Browse files » ARM: pbl: fix make dependencies ... The pbl used 'zbarebox.bin' as target instead of the real file. This lead to strange effects that the images depending on zbarebox.bin were only built every second time. This uses the full path as target. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2013
	fa49b39 Browse files » pbl: Fix typo in make causing pbl files to be rebuilt ... We had pbl_cc__o_c instead of pbl_cc_o_c. This caused all pbl object files to be rebuilt everytime due to missing .cmd file. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2013
2013-05-23	2827883 Browse files » ARM: invalidate data caches during early init ... Some SoCs come up with invalid entries in the data cache. This can lead to memory corruption when we enable them later, so invalidate the caches early. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> Sascha Hauer committed on 23 May 2013