Merge branch 'for-next/misc'

Merge branch 'for-next/imx8-usb'

Merge branch 'for-next/imx-i2c'

Merge branch 'for-next/imx'

Merge branch 'for-next/fs'

Merge branch 'for-next/efi'

Merge branch 'for-next/dts'

Merge branch 'for-next/dtc'

common: Kconfig: improve help text for DEBUG_LL ...

This adopts the help text used in Linux for the same setting. It
clarifies that a build with DEBUG_LL enabled will only work on the
system you chose the debug UART for.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.0-rc8 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.0-rc7 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2019.03.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: pbl: verify CONFIG_BAREBOX_MAX_IMAGE_SIZE is not exceeded ...

For platforms such as the at91, the boot ROM imposes an upper limit
on barebox file size.  Prior to 5a1a5ed253 ("ARM: images: use piggydata"),
BAREBOX_MAX_PBLX_SIZE seems to have been the way to go for limiting
the size of the final barebox binary when using the PBL.
With pblx removed, this variable is of no use, so have the existing
BAREBOX_MAX_IMAGE_SIZE replace its functionality.

Currently BAREBOX_MAX_IMAGE_SIZE is only checked against in the non-PBL
case, so add a check in the PBL case as well.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx6*phytec*: switch to new partitioning scheme ...

Both Linux and barebox support this new scheme and it's the actually
the recommended one.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6UL: liteSOM: depend on DDR controller settings ...

Initially we depended on DDR controller settings for liteSOM and liteboard. With
33fdc89d4cbd ("dts: update to v5.0-rc1") a `device_type = "memory";` property
was added to imx6ul-litesom.dtsi file, which causes "ram0" to be added with
512MB size (value in dtsi) instead of the real 256MB size that is configured in
barebox-grinn-liteboard-256mb.img. As a result Linux kernel fails to boot.

Lets depend on DDR controller settings, by removing whole `/memory` node from
device tree. This makes barebox-grinn-liteboard-256mb.img able to boot Linux
kernel once again.

Reported-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fix zbarebox linking with new ld ...

Signed-off-by: 张忠山 <zzs213@126.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: dwc: tune down link up messages ...

This function may be called repeatedly while establishing the link,
so printing a message each time a working link is found can add quite
a bit of noise. Tune those messages down to the debug level.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-xload: check for PRSSTAT_BREN only after each block ...

The BREN bit tells us a watermark level sized buffer is ready for read.
Instead of testing it before each FIFO read we must only check it once
and then read a watermark level sized buffer. This is at least necessary
on Layerscape, otherwise timeouts occur while reading the buffer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-xload: Add bigendian support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-xload: Use static inline io wrappers ...

We'll need big endian support for Layerscape, so put the io accessors
into static inline wrappers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-xload: move some register defines to header file ...

To make them usable for the PBL driver aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

esdhc-xload: Move to drivers/mci ...

The esdhc-xload code will be used by upcoming Layerscape support aswell,
so move it from architecture code to drivers/mci/.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Fix cpu_info for armv8 ...

We have get_cr() to get the control register for the different exception
levels. Use it rather than the variant hardcoded for EL1.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include/phy: Add missing modes ...

PHY_INTERFACE_MODE_SGMII_2500 and PHY_INTERFACE_MODE_NONE are missing.
Add these to be consistent with the Kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: ubifs: Remove unused crc16 functions ...

The crc16 functions in ubifs are unused, so remove them.
(They were only used in the LPT functions which are completely removed
for the barebox readonly implementation)

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: i.MX: Add early driver for use in PBL ...

i2c is used in SPD EEPROMs and thus needed very early before barebox is
up. This patch adds a i.MX i2c driver variant for use in PBL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX habv3: add missing includes and make locally used function static ...

Without this building fails with:

drivers/hab/habv3.c:80:12: error: static declaration of 'imx25_hab_get_status' follows non-static declaration
In file included from drivers/hab/habv3.c:14:
include/hab.h:39:5: note: previous declaration of 'imx25_hab_get_status' was here
drivers/hab/habv3.c:87:1: warning: data definition has no type or storage class
drivers/hab/habv3.c:87:1: warning: type defaults to 'int' in declaration of 'postmmu_initcall' [-Wimplicit-int]
drivers/hab/habv3.c:87:1: warning: parameter names (without types) in function declaration
drivers/hab/habv3.c:80:12: warning: 'imx25_hab_get_status' defined but not used [-Wunused-function]

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx8mq-zii-ultra: Add USB related nodes ...

Add nodes for exposed USB ports as well as USB hub connected to one of
them.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: imx8mq: Add nodes for USB IP blocks ...

Add node for USB IP block that is missing in upstream DTS. This patch
should be reverted once that changes.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>