LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2018-11-08	646d1a0 Browse files » dts: update to v4.20-rc1 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2018
2018-11-08	72f6828 Browse files » net: only use ethaddrs registered with device node on that device ... If an ethaddr is registered with a device node the ethid is set to 0 via the struct initialization. Now if a device without a node (for eaxample a USB network adapter) with ethid 0 looks up the ethaddr it will wrongly get that address assigned, as the ethid matches. Avoid this by setting the ethid to something that no device will ever use when the addr is registered via a device node. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 7 Nov 2018 Sascha Hauer committed on 8 Nov 2018
2018-11-07	ebc406c Browse files » dts: update to v4.19-rc8 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Nov 2018
	20c12d0 Browse files » commands: mem: truncate mem device size to fit the loff_t file size ... On 64bit arches the file covering the whole address space is larger than what can be represented in the loff_t type (s64) used for the file size. Thus the size of this device is interpreted as negative in a lot of places. Fix this by truncating the size to fit the file size type. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Nov 2018 Sascha Hauer committed on 7 Nov 2018
	5de6293 Browse files » mtd: nand_denali: update compatible ... 190a1c6e47 ("dts: update to v4.18-rc3") changed the compatible of the Denali NAND controller. Update the compatible in the barebox driver accordingly. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bastian Krause authored on 6 Nov 2018 Sascha Hauer committed on 7 Nov 2018
2018-11-06	5a054ae Browse files » ARM: rdu1: Implement RDU1 config loading ... RDU1 stores various configuration parameters, including FEC's MAC address, in a configuration blob that can be located in on of three places: SPI NOR, RAVE SP EEPROM or Microwire EEPROM. This patch add an initcall to load those configuration variables from a valid source (CRC8 checked) as well as expose then as "config_<var>" environment variables. This patch also adds appropriate code to register MAC address obtained from config blob. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 5 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	1ee6ad7 Browse files » ARM: rdu1: Add an alias for Microwire EEPROM ... Add an alias for Microwire EEPROM to give it a better name in /dev. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 5 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	e4765c3 Browse files » nvmem: Port Linux driver for Microwire 93XX46 EEPROM chips ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 5 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	0832036 Browse files » lib: Port CRC8 implementation from Linux kernel ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 5 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	c16bcbc Browse files » ARM: at91: remove unused defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	a698137 Browse files » ARM: at91: separate restart handler registration into SoC specific code ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	30f4a93 Browse files » ARM: at91: make at91sam926x_board_init board specific ... The base addresses used in at91sam926x_board_init() differ with each SoC. The board knows which SoC we are running on though, so create and use SoC specific variants of these functions which pass the appropriate base addresses to at91sam926x_board_init(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	e08031d Browse files » ARM: at91: drop at91_pmc_write()/at91_pmc_read() ... at91_pmc_write() and at91_pmc_read() need a compile time base address, so remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	edd34f7 Browse files » ARM: at91rm9200ek: use plain readl/writel for pmc accesses ... at91_pmc_write() needs a compile time base address, so rather use plain read/writel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f3e537c Browse files » ARM: at91sam926x use writel rather than pmc accessor function ... The pmc accessor function depends on a compile time base address, so rather use writel directly. In this case we can hardcode the base address again since all at91sam926x SoCs have the same pmc base address. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	393bba8 Browse files » ARM: at91: remove mach/io.h ... Remove at91_sys_read() and at91_sys_write() since these are no longer used. This makes mach/io.h empty so remove that aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f0d8a2e Browse files » ARM: at91rm9200 timer: Make system timer defines SoC specific ... - rename at91_st.h to at91rm9200_st.h - rename prefix from AT91_ to AT91RM9200_ - remove register offset from System timer defines Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f8e1e84 Browse files » ARM: at91rm9200 timer: remove unused include ... at91rm9200_time.c doesn't need anything from at91_pmc.h, remove the inclusion. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	8e04cee Browse files » ARM: at91: remove unused header file ... nothing from mach/at91_tc.h is used, remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	99b0114 Browse files » ARM: at91rm9200: Add SoC namespace to memory controller defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	c67ac51 Browse files » ARM: at91: Use SoC specific base addresses where appropriate ... Replace AT91_ base addresses with their SoC specific variants where possible. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	adc44f5 Browse files » ARM: socfpga: socrates: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	d5f1385 Browse files » ARM: socfpga: socdk: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	705c74f Browse files » ARM: socfgpa: de0-nano-soc: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	b5d01ad Browse files » ARM: socfpga: sockit: convert to lowlevel helper ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	3925e51 Browse files » ARM: socfpga: add lowlevel header with common code ... Apart from the RAM size, all cyclone5-based Socfpga boards use the same lowlevel code. Instead of duplicating it for every board, move it to mach-socfpga and provide a macro to use it in the boardspecific code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	9984960 Browse files » ARM: rdu2: Replace board code with gpio-hog nodes ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Oct 2018 Sascha Hauer committed on 6 Nov 2018
2018-11-05	c60aa1f Browse files » ARM: rpi: autosize malloc area ... Autosize the malloc area according to the available RAM size. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	94f6a71 Browse files » ARM: rpi: add raspberry pi 3 support ... This adds basic support at the same feature level as the other supported raspberry pi boards. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	5db9fdc Browse files » ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero ... Signed-off-by: Enrico Joerns <ejo@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Joerns authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018