LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2010-02-03	7f9bde6 Browse files » ep93xx eth driver: Remove unnecessary parentheses in constant definitions ... ep93xx eth driver: Remove unnecessary parentheses in definition of the constants MII_ADDRESS_MAX and MII_REGISTER_MAX Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 2 Feb 2010 Sascha Hauer committed on 3 Feb 2010
2010-02-02	e1cd82c Browse files » ep93xx eth driver: Reorder functions to eliminate need for prototypes ... ep93xx eth driver: Define ep93xx_eth_send_packet() and ep93xx_eth_rcv_packet() before ep93xx_eth_probe(), and eliminate their prototype declarations Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 1 Feb 2010 Sascha Hauer committed on 2 Feb 2010
2010-02-02	0e46c26 Browse files » ep93xx eth driver: Fix dump_xxx_queue() parameter list ... ep93xx eth driver: Add missing parameter to dump_rx_status_queue(), dump_tx_descriptor_queue() and dump_tx_status_queue() Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 1 Feb 2010 Sascha Hauer committed on 2 Feb 2010
2010-02-01	6cbf70a Browse files » Merge branch 'pu' Sascha Hauer committed on 1 Feb 2010
	7d3da14 Browse files » i.MX: select armv6 for i.MX31/35 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	e304879 Browse files » add armv6 support to the konfig system ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	42f4ca1 Browse files » put only once used function inline ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	8f0d0f2 Browse files » replace ET_DEBUG with pr_debug ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	b407cda Browse files » pcm043: initialize cpufreq to 532MHz ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	922bb41 Browse files » remove typedef cmd_tbl_t and replace it with struct command ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	88351d2 Browse files » Move tftp/nfs specific code to net/* ... This adds a few bytes of binary space but is done to put the code where it belongs to. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	085e30b Browse files » remove unused file common/flash.c ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	426de44 Browse files » remove unused NETCONSOLE stuff ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	3f1bf1f Browse files » Use cache functions from kernel ... These cache functions have been extracted from arch/arm/boot/compressed/head.S. The old code only worked properly on ARMv4. Tested on ARMv4, ARMv5, ARMv6 hardware. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	e4ee34a Browse files » i.MX35: Fix pad control bit positions ... Using these macros simplify the configuration for special GPIO usage. But they should use correct bit positions for usage in the IOMUX_PAD() macro. Note: These are the bit positions of the i.MX35 CPU. Not checked for the other i.MX3x CPUs. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 29 Jan 2010 Sascha Hauer committed on 1 Feb 2010
	1e65863 Browse files » cfi_flash: fix alignment problem ... This patch fixes a alignment problem which may show during this scenario: - 32 or 64 attached NOR flash - flashing an image directly from network to the nor flash The involved network driver is "smc9111.c". The data that comes from the network stack and should be written into the flash isn't 32 bit alligned (at least with this network driver). This is probably due to the 48 bit wide ethernet addresses. However the "cfi_flash.c" driver doesn't handle this situation, and accesses the not-alligned address with a 32 bit pointer. This patch fixes the problem by reducing the access width if an alligment problem between source and destination is found. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
	4903636 Browse files » smc91111: fix odering of mac address read from EEPROM ... On my little endian PXA270, the ethernet address is byte swapped: correct ethernet address: 00:50:c2:80:a7:bd broken ethernet address: 50:00:80:c2:bd:a7 The correct value is what the sticker on the baoard and the linux driver says. This patch fixes the problem by reading the ethaddr byte-wise from the eeprom. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
	7ca411e Browse files » Merge branch 'next' Sascha Hauer committed on 1 Feb 2010
	v2010.02.0 dc6550e Browse files » v2010.02.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
2010-01-29	512a1c8 Browse files » Fix nand_imx for i.MX21 ... Recent changes to the nand_imx driver broke it for i.MX21 systems; the i.MX21 NAND controller is more akin to the one in i.MX27/i.MX31, than to the one in i.MX25/i.MX35. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ivo Clarysse authored on 28 Jan 2010 Sascha Hauer committed on 29 Jan 2010
2010-01-26	33b842d Browse files » mach-at91: reset_cpu: fix confusing reference to watchdog ... On at91 we talk directly to the reset controller to reset the cpu, rather than use the watchdog, so update the comment to match. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Korsgaard authored on 19 Jan 2010 Sascha Hauer committed on 26 Jan 2010
2010-01-25	b6e6334 Browse files » remove obsolete comment ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jan 2010
2010-01-25	d2a58c2 Browse files » remove unused cdp code ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jan 2010
2010-01-19	976b4be Browse files » Merge branch 'for-sha-mx35-3-stack-updates' of ssh://git.pengutronix.de/git/mkl/barebox into next Sascha Hauer committed on 19 Jan 2010
2010-01-18	196333c Browse files » i.MX35 3stack: update of defconfig ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
	8605665 Browse files » i.MX35 3stack: update environemnt to support jffs and ubi/ubifs ... ubifs from nand is default Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
	695539f Browse files » i.MX35 3stack: increase env partition to hold splash image ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
	5f2afc6 Browse files » i.MX35 3stack: clean up indention of lowlevel_init ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
	884d875 Browse files » i.MX35 3stack: clean up indention ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
	c23a05d Browse files » i.MX35 3stack: adopt board to new mc13892 and mc9sdz60 driver interface ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010