pbl: remove start_barebox() stub ...

PBL never calls start_barebox().  If it does, it is a bug.
Without this stub function, we can detect such a bug at link time.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: remove unused variable ...

arm_architecture is unused, remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: ignore barebox_zero_env ...

Since commit c4c2317fe8a2 (defaultenv: generate force-built-in
(zero) environment file), we have this generated file.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: atmel: sama5d4 xplained: correc env path ...

Correct the environment path for sama5d4 xplained board.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-bb: Also print raw position in debug messages ...

When debugging the nand-bb devices also the raw position on the
device is interesting, print it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-bb: Fix test for bad block when reading ...

in nand_bb_read() 'offset' contains the virtual position on the device,
but we have to test for a bad block on the raw physical position, so
use bb->offset instead of offset

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-bb: fix erasing bb devices with bad blocks ...

mtd_erase does not skip bad blocks, we must skip them in nand_bb_erase
instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand-bb: Fix accesses beyond device ...

When a block is marked bad after the bb device has been created
the real size of the bb device is smaller than the calculated size
on creation. In this case we can't rely on the upper layers anymore
that they won't pass read/write sizes in that fit into the device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Fix allowing to erase bad blocks on partitions ...

Partitions are mtd devices themselves, but the 'erasebad'
parameter is only set to the master mtd device. To allow to
erase bad blocks on partitions test the master device instead
of the partition devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: omap: Fix OMAP_ECC_BCH8_CODE_HW ecc mode ...

This is broken since:

| commit 00f119a
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Fri Aug 1 14:09:48 2014 +0200
|
|     mtd: omap gpmc: fix ecc bytes/size
|
|     The ecc bytes / size are per subpage, not per page.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The ecc code in omap_correct_data() expects to correct a whole page
at once, so we must tell the nand layer that we have 4 * 13 bytes of
ecc bytes and 4 * 512 bytes of ecc size. Otherwise the NAND layer will
iterate over 512 byte steps over a page and call the .correct callback
each time.

This only works for 2k pagesize and needs revisit once other page sizes
shall be supported. It would be better to tell the nand layer the real
ecc bytes (13) and ecc size (512) instead and drop the iteration in
omap_correct_bch(). However, this needs better testing so it isn't done
here now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Phytec phyCORE OMAP4460: Split xload defconfigs ...

The configs grew too big to support both NAND and MMC at the
same time, so split them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

blspec: put blspec bootargs into a .dyn bootargs variable ...

So that they get deleted later when something else is booted.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/socfpga'

Merge branch 'for-next/raspberry-pi'

Merge branch 'for-next/pxa'

Merge branch 'for-next/net'

Merge branch 'for-next/mxs'

Merge branch 'for-next/misc'

Merge branch 'for-next/minmax'

Merge branch 'for-next/makeall'

Merge branch 'for-next/imx'

Merge branch 'for-next/doc'

Merge branch 'for-next/arm'

Merge branch 'for-next/am335x'

ARM: bcm2835: fix checkpatch warning ...

Here is checkpatch.pl log:

    WARNING: space prohibited between function name and open parenthesis '('
    #134: FILE: arch/arm/mach-bcm2835/core.c:75:
    +void __noreturn reset_cpu (unsigned long addr)

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

raspberry-pi: mac address detection support ...

increase the mbox timeout as it take more time to retreive the mac

fix led register too

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

regulator: add bcm2835 driver ...

this will allow to handle IP power automatically and not at board level

Mainline kernel need this as they do not have the regulator driver support

as some IP such as USB are not power on at boot

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

regulator: allow to use it with non DT device ...

this will use the device name as regulator name

with the same Algo as clkdev for lookup

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: add postcore_platform_driver ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

amba: pl011: add support for regulator ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>