LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2014-05-05	8fb1d4e Browse files » Merge branch 'for-next/mips' ... Conflicts: arch/mips/boards/loongson-ls1b/serial.c Sascha Hauer committed on 5 May 2014
	4626972 Browse files » Merge branch 'for-next/memtest' Sascha Hauer committed on 5 May 2014
	f8327af Browse files » Merge branch 'for-next/ioresource' Sascha Hauer committed on 5 May 2014
	b568687 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 5 May 2014
	80f1589 Browse files » Merge branch 'for-next/ifup' Sascha Hauer committed on 5 May 2014
	2274c6e Browse files » Merge branch 'for-next/env' Sascha Hauer committed on 5 May 2014
	d27b978 Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 5 May 2014
	v2014.05.0 c61ba23 Browse files » Release v2014.05.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 May 2014
	6bef4dd Browse files » dts: update to v3.15-rc3 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 May 2014
	825fca3 Browse files » imx6: ocotp: Add On-Chip OTP registers write support ... FUSEs (OTP registers) can be written via /dev/imx-ocotp character device. For example, writing MAC 12:34:56:78:9A:BC can be performed as > mw -l -d /dev/imx-ocotp 0x8c 0x00001234 > mw -l -d /dev/imx-ocotp 0x88 0x56789ABC and reading as > md -l -s /dev/imx-ocotp 0x88+8 00000088: 56789ABC 00001234 , where 0x88 (0x224) and 0x8C (0x234) are offsets of MAC OTP registers. Notice: FUSEs are PROM, so "0" (unprogrammed) bits can be replaced with "1" (but not vice versa) only once. Also, for MAC there are convinient parameters: > ocotp0.permanent_write_enable=1 > ocotp0.mac_addr=12:34:56:78:9A:BC imx_ocotp 21bc000.ocotp: reloading shadow registers... imx_ocotp 21bc000.ocotp: reloading shadow registers... > echo $ocotp0.mac_addr 12:34:56:78:9A:BC Signed-off-by: Uladzimir Bely <u.bely@sam-solutions.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uladzimir Bely authored on 11 Apr 2014 Sascha Hauer committed on 5 May 2014
	e0afbe3 Browse files » imx:mmdc:Move imx6-reg include to imx6-mmdc header ... Move the imx6-reg.h include to the imx6-mmdc header. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
2014-04-30	3e571c1 Browse files » imx6: Add support for phyCARD-i.MX6 ... Add support for Phytec phyCARD-i.MX6. - 1GB RAM on two banks - 1GB RAM on one bank - 2GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 30 Apr 2014
	159f1ea Browse files » ARM: boards: Makefile: fix whitespace ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
	a8334c6 Browse files » Fix bug in export 64 bit unsigned environment variable. ... This patch corrects exporting unsigned 64-bit environment variables. I had left out a signed off line before. Signed-off-by: Michael Burkey <mdburkey at gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael D. Burkey authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
2014-04-29	eecac38 Browse files » mtd: nand-mxs: Return bitflips ... The read_page hook shall return the number of bitflips. Implement that. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	ccc4eac Browse files » RiOTboard: add new board ... this board is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested : - UART2 (console) - eMMC - SDCard - uSDCard - Ethernet - USB Host (through 4 ports hub) - I2C 1/2/3 - 2 LEDs Boot on eMMC and through USB loader are tested. For more informations on this board : http://www.riotboard.org/ Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 24 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	41ae766 Browse files » ARM: dove: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sascha Hauer committed on 29 Apr 2014
	7b4fb14 Browse files » ARM: Tegra20: Use upstream dtsi files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	99a720c Browse files » ARM: AM33xx: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	d557214 Browse files » ARM: i.MX27: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	cb228a8 Browse files » ARM: i.MX25: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	3fafc8e Browse files » mtd: nand-bb: use list_for_each_entry_safe ... We need list_for_each_entry_safe in dev_remove_bb_dev since the list entries are removed during iteration over the list. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reported-by: Alexander Aring <alex.aring@gmail.com> Sascha Hauer committed on 29 Apr 2014
	4905948 Browse files » genenv: fix tempdir creation when target is a relative path ... when $target is a path relative to $objtree the script fails. This is because we cd to $basedir and then copy to $tempdir which then is no longer valid. Fix this by converting $tempdir to an absolute path first. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Christoph Fritz <chf.fritz@googlemail.com> Sascha Hauer committed on 29 Apr 2014
2014-04-28	bb7cf71 Browse files » ARM: i.MX53: Use upstream dtsi files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014
	95b1337 Browse files » ARM: i.MX6: Use upstream dtsi files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014
	04a3e57 Browse files » ARM: dts: i.MX51: Use upstream dts files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014
	f9b8b4a Browse files » dts: i.MX51 efika sb: Roll back pingroup changes ... The pingrp defines never made it upstream, so roll back the changes and use the individual pin defines for the Efika sb instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014
	5d0362c Browse files » dts: Use dt-bindings from kernel ... barebox used to have its own include/dt-bindings with files copied from the corresponding kernel files. Use upstream dt-bindings directly instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014
	724ea7e Browse files » imx6: read back memory size ... To reduce the devicetree files for one board with different memory sizes the memory size can be read back from i.MX6. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 25 Apr 2014 Sascha Hauer committed on 28 Apr 2014
	3781d93 Browse files » OF: barebox-env: Use bb device on NAND ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Apr 2014