LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2014-12-04	92e7d8e Browse files » i.MX6: phytec: Distil different startup functions ... Distil different startup functions into a generic one, different behavioral aspects of which can be influenced by its parameters. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 3 Dec 2014 Sascha Hauer committed on 4 Dec 2014
2014-11-27	1b6d26a Browse files » ARM: i.MX: update imx_v7_defconfig ... Enable support for the i.MX6sx sabresdb and the KaRo Tx6x. The sabresdb needs regulator support, so enable this aswell. Also enable usbserial support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	9196cac Browse files » ARM: i.MX: Add i.MX6sx sabresdb support ... This adds support for the Freescale i.MX6sx sabresdb board. Tested are: - UART - The three SD card slots - USB host - USB otg (host and device mode) - FEC (both) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	0c08fa3 Browse files » ARM: i.MX: Add i.MX6sx support ... Add some cpu type defines and clock support. The clock support is very different from other i.MX variants, so it's a separate file, like done in the kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	1abc120 Browse files » ARM: i.MX: ocotp: Add i.MX6sx compatible entry ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	f154e9c Browse files » ARM: i.MX: ocotp: Fix MAC address provider for unaligned addresses ... The current algorithm assumes the MAC address starts at a 4 byte aligned address. Unfortunately this is not always the case. On the i.MX6sx the MAC Address for the second FEC starts at offset 0x632. The register space for the fuse map has holes, only the 16 byte aligned words contain data. This means we have to skip the holes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	f2142fb Browse files » pinctrl: Add i.MX6sx compatible entry ... To let the driver probe on i.MX6sx. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	ee2a559 Browse files » imx-usb-loader: Add i.MX6sx support ... Not much to do here, only add the Product ID. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	5753074 Browse files » net: fec_imx: Add i.MX6sx compatible entry ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	6ed8916 Browse files » serial: i.MX: Use "per" clk ... Which is the correct clock for the baud rate. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	9e7c0e3 Browse files » mci: imx-esdhc: Add i.MX6sl compatible ... Which will also be used for the i.MX6sx. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
	df17efa Browse files » mci: imx-esdhc: Fix Interrupt enable register for i.MX6sx ... The reset default of this register has changed on i.MX6sx. Explicitly write the value we want to have to make it work on i.MX6sx. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2014
2014-11-26	5496137 Browse files » imx6: clk: Gate off ENFC clock before setting clock rate ... This fixes NAND initialization issue which appears occasionally on some i.MX6 SoCs (particulary was observed on phyCARD-i.MX6 with i.MX6Solo). Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Dmitry Lavnikevich authored on 21 Nov 2014 Sascha Hauer committed on 26 Nov 2014
2014-11-24	36d0811 Browse files » ARM i.MX: add 2-bit gate clock support ... Based on kernel clk-gate2 and barebox clk-gate implementations. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Dmitry Lavnikevich authored on 21 Nov 2014 Sascha Hauer committed on 24 Nov 2014
2014-11-20	0749603 Browse files » i.MX6: esdctl: Fix a bug in memory probing code ... Old version of imx6_mmdc_add_mem did not use 64-bit arithmetic and thus was prone to overflow on systems with 4GB of memory. It also did not take into account the fact that i.MX6 does not support more than 3.8GB of memory and would report incorrect memory size. This commit fixes both issues. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 13 Nov 2014 Sascha Hauer committed on 20 Nov 2014
	a56dcaa Browse files » ARM: i.MX51 efikasb: register init callback for PMIC init ... So that the PMIC initialisation is called once it's available. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Nov 2014
	f1b3619 Browse files » ARM: i.MX51 efikasb: Use defaultenv_append_directory ... To have the smartbook specific env available in the multi image. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Nov 2014
	c7f1228 Browse files » ARM: i.MX51: Add pwm aliases to device tree ... Needed for accessing the PWMs in barebox. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Nov 2014
	0437a24 Browse files » ARM: i.MX51: Setup MIPI ... Setting up the MIPI unit is necessary for proper IPU support, so set this up here. This is only needed for graphics in barebox, the Kernel repeats this setup during booting. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Nov 2014
	2a407b2 Browse files » ARM: i.MX: print silicon revision with pr_info ... So that this message can be silenced by reducing the loglevel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Nov 2014
	e8f9f5b Browse files » imx6: Add support for phyBOARD-SUBRA ... Add support for phyBOARD-SUBRA which use a phyFLEX-i.MX6 (pfla02) module. - i.MX6 SOLO with 512MB RAM Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 20 Nov 2014
	50bd3ea Browse files » imx6: add support for phyBOARD-ALCOR ... Add support for phyBOARD-ALCOR which use a phyFLEX-i.MX6 (pfla02) module. - i.MX6 Quad with 1GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 20 Nov 2014
2014-11-12	96f77e4 Browse files » ARM:pfla02: Move ethernet phy timings to dts ... Move the ethernet phy timinigs to phyFLEX-i.MX6 devicetree. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 12 Nov 2014
	6c6ff6e Browse files » ARM: update imx_v7_defconfig ... Enable micrel phy Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 11 Nov 2014 Sascha Hauer committed on 12 Nov 2014
	f97caf5 Browse files » ARM: i.MX6 Phytec phyFLEX: Fix imx6_bbu_nand_register_handler prototype ... imx6_bbu_nand_register_handler is dependent on CONFIG_BAREBOX_UPDATE_IMX6_NAND. Change the protoype definition such that said function is stubbed-out when CONFIG_BAREBOX_UPDATE_IMX6_NAND is not defined. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 11 Nov 2014 Sascha Hauer committed on 12 Nov 2014
	4b17d73 Browse files » ARM: i.MX: Make NAND related Kconfig options depend on MTD ... ARCH_IMX_EXTERNAL_BOOT_NAND, BAREBOX_UPDATE_IMX_EXTERNAL_NAND and BAREBOX_UPDATE_IMX6_NAND all enable features that make use of API provided by MTD subsystem, so to prevent those features breaking the build when MTD is disabled make them dependent on it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 10 Nov 2014 Sascha Hauer committed on 12 Nov 2014
2014-11-07	10a663b Browse files » ARM: i.MX6 GuF Santaro: Fix SD cd/wp gpios ... The gpios are plain wrong, use the correct ones. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Nov 2014
	5272207 Browse files » ARM: imx5: add imx5_cpu_lowlevel_init and use in all boards ... This is similar to what we do on imx6 and makes sure we apply the errata workarounds early. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Nov 2014 Sascha Hauer committed on 7 Nov 2014
	67666f9 Browse files » ARM: implement recommended WAR for errata 709718 ... ARM Cortex A8 errata 709718: "Load and store operations to shared device memory regions may not complete in program order" We implement the recommended workaround in the bootloader as it must be applied before enabling the MMU for the first time. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 6 Nov 2014 Sascha Hauer committed on 7 Nov 2014
	a3a0dba Browse files » ARM: i.MX6 GuF Santaro: Make edt touchscreen compatible more specific ... The compatible string officially merged in the kernel is edt,edt-ft5206, not edt,edt-ft5x06. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Nov 2014