LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2013-11-06	9617cfe Browse files » gui: convert the bmp renderer to respect line_length ... Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 4 Nov 2013 Sascha Hauer committed on 6 Nov 2013
	3ad1765 Browse files » gui: convert graphic utils to respect line_length ... Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 4 Nov 2013 Sascha Hauer committed on 6 Nov 2013
	485544f Browse files » fb: add a line_length value to struct fb_info ... Add support for framebuffers with noncontiguous horizontal lines. Video drivers can set this value if the hardware requires it. In case a driver does not set it, the current value of xres * (bpp / 8) is used instead. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 4 Nov 2013 Sascha Hauer committed on 6 Nov 2013
2013-11-04	7a305b2 Browse files » bcm2835: move mci register at board level ... not all board have a SD card. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Nov 2013 Sascha Hauer committed on 4 Nov 2013
2013-10-22	607968f Browse files » ARM: rpi: use the proper ARM memory size ... Use the mailbox driver to query the size. This properly takes the firmware's VideoCore/ARM memory split into account. Linux can now be booted with more than 128 MiB. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	db81ebb Browse files » mci: bcm2835: use the registered device clkdev ... Switch from local mailbox code to using the newly created clock device. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	a476255 Browse files » ARM: rpi: register a clkdev for the eMMC clock ... Use the mailbox driver to query the clock frequency and create a clkdev for the bcm2835_mci driver. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	76cb400 Browse files » ARM: bcm2835: add a mailbox driver for VideoCore ... This allows exchanging data with the on-SoC GPU. Based on U-Boot code by Stephen Warren. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	d841f42 Browse files » ARM: bcm2835: register the clocksource device earlier ... RPi's mailbox driver is used early and it needs clock functions to handle timeouts. Register the driver straight after its clkdev. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	233718d Browse files » ARM: bcm2835: register the clocksource driver earlier ... RPi's mailbox driver is used early and it needs clock functions to handle timeouts. Promote to a core_initcall(). Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	4754cc7 Browse files » ARM: bcm2835: cleanup clock registering ... Sync exposed names while at it. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	55f6869 Browse files » common: add a macro to align an array on the stack ... The macro can be used for temporary stack buffers which need to meet a minimum alignment requirement. This will be used by bcm2835 mailbox users, where all buffers need to be aligned. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	0fdd91d Browse files » ARM: cache: do not crash when the MMU isn't yet setup ... Drivers currently cannot implement explicit cache handling and rely on running the same code before and after mmu_initcall() without crashing. Depending on the chosen config options, the cache functions are not yet setup and using them early on ends in a null pointer dereference. The RPi's mailbox driver is such a case; it requires cache handling once the MMU is fully set up and yet the RPi setup needs to use the driver to get the memory size before mem_initcall() and hence mmu_initcall(). Fix this by checking the cache_fns pointer before dereferencing it. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
	5611ccb Browse files » ARM: cache: restore cache functions from the PBL ... When using CONFIG_MMU_EARLY combined with CONFIG_PBL_IMAGE, the barebox setup reuses the MMU setup from the PBL, but doesn't setup the cache functions. Set these up to guarantee proper early cache handing before mmu_initcall(). Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 19 Oct 2013 Sascha Hauer committed on 22 Oct 2013
2013-10-16	2976617 Browse files » ARM: rpi: add SD card environment support ... Similar to the OMAP boards mount the SD card to /boot and expect the environment as /boot/barebox.env Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Oct 2013
	16dd5e5 Browse files » ARM: rpi: Update defconfig ... Enable MMU, stack dumps and a lot of other features Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Oct 2013
	2725164 Browse files » mci: bcm2835: Add detect callback support for hardware device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Oct 2013
	43efd0e Browse files » ARM: rpi: fix reading of the EMMC clock for CONFIG_MMU ... Add explicit flushing to prevent the 50MHz fallback. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 15 Oct 2013 Sascha Hauer committed on 16 Oct 2013
	64bf420 Browse files » ARM: rpi: fix tty device name in bootargs-base ... Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 15 Oct 2013 Sascha Hauer committed on 16 Oct 2013
	0ce9083 Browse files » boot: remove incomplete 'title' handling in menu ... The 'boot -m' command executes the /env/boot/* scripts in order to determine the title of a boot menu entry. This is not complete and depends on changes in the environment, so remove it for now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 16 Oct 2013
2013-10-15	579cbeb Browse files » at91: fix typo in Kconfig description ... Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 14 Oct 2013 Sascha Hauer committed on 15 Oct 2013
2013-10-15	0a45810 Browse files » common: fix possible build problem without password support ... In the case where CONFIG_PASSWORD is off, CONFIG_PASSWORD_DEFAULT is undefined. As undefined is not "", this causes make to call find -type f. If there is a filename containing a :, make will complain about having "multiple target patterns" Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 14 Oct 2013 Sascha Hauer committed on 15 Oct 2013
2013-10-14	8f23a17 Browse files » Merge branch 'pu/bootloader-spec' Sascha Hauer committed on 14 Oct 2013
	61cf2b5 Browse files » add kernel-install tool for bootloader Spec ... This adds a tool for installing kernels according to the bootloader spec. systemd already has a similar tool, but it is limited to installing kernels on the currently running system. The barebox kernel-install tool instead can also be used to install kernels on removable media on a development host for cross development. It is compiled in two variants, as 'kernel-install' for the host and as 'kernel-install-target' using $CROSS_COMPILE. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2013
	51c92d2 Browse files » x86: Fix compiler warnings ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2013
	ef5dac9 Browse files » Implement bootloader spec support for barebox ... The Bootloader Specification describes a way how kernels can be installed on devices and how they can be started by the bootloader. The bootloader spec is currently supported by (x86) gummiboot and by systemd which provides a kernel-install script. With the bootloader spec it's possible for the Operating system to install a new kernel without knowing about the bootloader and for the bootloader it's possible to discover and start Operating Systems on a media without being configured. For more details about the spec see: http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/ This patch adds barebox support for the spec. It enhances the 'boot' command so that not only boot script names can be given, but also devices containing bootloader spec entries. With this it's possible to call the 'boot' command like: 'boot sd emmc net'. It would then first look for bootloader spec entries on the (removable) sd card, then, is nothing is found, on the internal emmc and if still unsuccessful would call the 'net' bootscript. The bootloader Spec currently doesn't specify which entry should be default if multiple entries are found on a single device. Therefore barebox currently has two extensions of the spec. The $BOOT diretory can contain a file named 'default'. If present, the content of the file is treated as a filename under $BOOT/loader/entries/ which is used as default. Similarly if a file named 'once' is present, the entry is started once and the file is removed afterwards. This is useful for testing if a newly installed kernel works before making it the default. As on ARM and other Architectures a devicetree has to be specified for the kernel, the 'devicetree' property is used to specify a devicetree. Like 'kernel' and 'initrd' this also contains a pth relative to $BOOT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2013
	1369bfd Browse files » cdev: store dos partition type in struct cdev ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2013
	51dce5f Browse files » add function to read single line files ... Often small files are used to store the value od a variable. This adds a function to easily read such a variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2013
	95c9690 Browse files » ARM: i.MX: remove now unused image-y from Makefile.imx ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Oct 2013
	0abb8a6 Browse files » i2c-omap: fix reported revison ... Report correct major and minor revision Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 7 Oct 2013 Sascha Hauer committed on 14 Oct 2013