ehci-hcd: remove useless timeout ...

This is just a regular iteration loop so no timeout needed

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: bbu-internal: detect device before writing to it ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Stefan Christ <s.christ@phytec.de>

ARM: am335x_defconfig: Enable the of_fixup_status command ...

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: Add of_fixup_status ...

of_fixup_status enables or disables the status property of a
given node with a device tree fixup.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: oftree: Add function to register set status fixup ...

Added a function to register a fixup to enable or disable
device tree nodes.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: avoid tabs in help text ...

Tabs in kconfig help text will create unwanted indention artefacs when
the help text is scrolled horizontally. Replacing tabs with spaces.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edb9302 eth: provide proper phy config ...

The evaluation boards EDB9302 and  Olimex-CS-E9302 both use a
KS8721BL transceiver in default strapping which is phy_addr=1

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

EP93xx eth: allow passing of phy config via platform data ...

Passing phy configuration to the ep93xx_eth driver was not supported yet
and will be added with this patch. When no pdata is passed, the probably
broken default of phy_addr = 0 will be used to maintain compatibility
with the previous implementation.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: magicvar: make locally used magicvar_find() static ...

The patch fixes this compiler's warning:

    commands/magicvar.c:27:22: warning: no previous prototype for 'magicvar_find' [-Wmissing-prototypes]
     struct magicvar_dyn *magicvar_find(const char *name)
                          ^

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net ep93xx mii: do not supress MII preamble transmission ...

PHY like the ks8721bl used on the edb9302 and similar evaluation boards
will initially not respond to the ep93xx_phy_read/write functions when
the MII-preamble is supressed. The supression is switched on by default
and must be switched off by clearing bit 8, see also EP93xx Users guide.
Removing the orphaned MII_SUPPRESS_PREAMBLE config option, note:
setting MII_SUPPRESS_PREAMBLE would actually enable the preamble transmission.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: fastboot: fastboot erase is implemented ...

fastboot erase was implemented from the start, remove note stating
that it's not implemented.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: Update USB fastboot section ...

Add some documentation about fastboot 'flash' command and some useful
example how to use it to boot an initrd.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: fat: fix copy-paste typo ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Print error message if of_state_fixup() fails ...

If of_state_fixup() fails for some reason, boot/bootm will fail, too

However, it is completely unclear where the error has happened, and to
the user it rather seems like the kernel device tree loaded from some
file was broken/corrupt, not that in fact some fixup routine was
failing.

Adding a meaningful error message can help debugging significantly.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

eeprom/at25: parse partitions from device tree ...

Unlike at24 (I2C), the at25 (spi) EEPROM driver doesn't check if the
device tree node contains partition definitions.  This means that one
for example cannot have bootstate partitions on an at25 EEPROM, while it
works on an at24 EEPROM.

This patch adds device tree based partition support to the at25 driver.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: ext4: make locally used ext4fs_get_indir_block() static ...

The patch fixes this compiler's warning:

      CC      fs/ext4/ext4_common.o
    fs/ext4/ext4_common.c:130:5: warning: no previous prototype for
    'ext4fs_get_indir_block' [-Wmissing-prototypes]
     int ext4fs_get_indir_block(struct ext2fs_node *node, struct
    ext4fs_indir_block *indir, int blkno)
         ^

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

process_escape_sequence: add support for \u ...

Expand the \u escape sequence to the user currently set in the
$global.user variable.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp-console: select CRC16 and POLLER, depend on CONSOLE_FULL ...

RATP console selects RATP, which in turn selects CRC16, but those
chains don't work in Kconfig, so select CRC16 also from the
console option.

Also fix build errors by depending on CONSOLE_FULL and selecting
POLLER.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ramoops: allow to build without OFTREE support ...

Ramoops may be useful even without oftree support, as kernels
booted without a DT may have other means to reserve the
ramoops memory.

Fixes:
In function `ramoops_probe':
undefined reference to `of_add_reserve_entry'

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Fix resource_size_t format specifier ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: Fix unregister device after device probe failure ...

When a device probe fails the device is removed from the active list.
If then the device is unregistered afterwards it is removed from the
active list again resulting in a crash. To fix this initialize the
devices active list entry when removing it from the active list.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: video: drop unused of_get_display_timing() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: video: fb: make locally used fb_set_shadowfb() static ...

The patch fixes this compiler's warning:

    drivers/video/fb.c:233:5: warning: no previous prototype for
    'fb_set_shadowfb' [-Wmissing-prototypes]
     int fb_set_shadowfb(struct param_d *p, void *priv)
         ^

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/regmap'

Merge branch 'for-next/ratp'

Merge branch 'for-next/net'

Merge branch 'for-next/misc'

Merge branch 'for-next/linux-headers'

Merge branch 'for-next/input'

Merge branch 'for-next/hab'