LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2014-05-05	b568687 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 5 May 2014
	80f1589 Browse files » Merge branch 'for-next/ifup' Sascha Hauer committed on 5 May 2014
	2274c6e Browse files » Merge branch 'for-next/env' Sascha Hauer committed on 5 May 2014
	d27b978 Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 5 May 2014
	v2014.05.0 c61ba23 Browse files » Release v2014.05.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 May 2014
	6bef4dd Browse files » dts: update to v3.15-rc3 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 May 2014
	825fca3 Browse files » imx6: ocotp: Add On-Chip OTP registers write support ... FUSEs (OTP registers) can be written via /dev/imx-ocotp character device. For example, writing MAC 12:34:56:78:9A:BC can be performed as > mw -l -d /dev/imx-ocotp 0x8c 0x00001234 > mw -l -d /dev/imx-ocotp 0x88 0x56789ABC and reading as > md -l -s /dev/imx-ocotp 0x88+8 00000088: 56789ABC 00001234 , where 0x88 (0x224) and 0x8C (0x234) are offsets of MAC OTP registers. Notice: FUSEs are PROM, so "0" (unprogrammed) bits can be replaced with "1" (but not vice versa) only once. Also, for MAC there are convinient parameters: > ocotp0.permanent_write_enable=1 > ocotp0.mac_addr=12:34:56:78:9A:BC imx_ocotp 21bc000.ocotp: reloading shadow registers... imx_ocotp 21bc000.ocotp: reloading shadow registers... > echo $ocotp0.mac_addr 12:34:56:78:9A:BC Signed-off-by: Uladzimir Bely <u.bely@sam-solutions.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uladzimir Bely authored on 11 Apr 2014 Sascha Hauer committed on 5 May 2014
	7af9c3a Browse files » net cpsw: fix rx stability under heavy network load ... RX DMA Head Descriptor Pointer can get 0 when there is a lot of traffic, which results in a timeout error. A good way to provoke this error is by sending lots of ARP requests. This patch makes sure that the RX DMA Head Descriptor Pointer is set. The origin driver, from which this is derived, already contains this fix. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
	5dafef6 Browse files » tftp: add timeframe when remote server is retransmitting ... If there's packet loss and the remote server needs to retransmit, there is falsely no timeframe left because TIMEOUT (server wait time) and TFTP_TIMEOUT (abort timer) are the same. This patch increases TFTP_TIMEOUT. See RFC2349 for more info: http://tools.ietf.org/html/rfc2349 Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
	e0afbe3 Browse files » imx:mmdc:Move imx6-reg include to imx6-mmdc header ... Move the imx6-reg.h include to the imx6-mmdc header. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
2014-04-30	3e571c1 Browse files » imx6: Add support for phyCARD-i.MX6 ... Add support for Phytec phyCARD-i.MX6. - 1GB RAM on two banks - 1GB RAM on one bank - 2GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 30 Apr 2014
	159f1ea Browse files » ARM: boards: Makefile: fix whitespace ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
	a8334c6 Browse files » Fix bug in export 64 bit unsigned environment variable. ... This patch corrects exporting unsigned 64-bit environment variables. I had left out a signed off line before. Signed-off-by: Michael Burkey <mdburkey at gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael D. Burkey authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
2014-04-29	eecac38 Browse files » mtd: nand-mxs: Return bitflips ... The read_page hook shall return the number of bitflips. Implement that. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	ccc4eac Browse files » RiOTboard: add new board ... this board is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested : - UART2 (console) - eMMC - SDCard - uSDCard - Ethernet - USB Host (through 4 ports hub) - I2C 1/2/3 - 2 LEDs Boot on eMMC and through USB loader are tested. For more informations on this board : http://www.riotboard.org/ Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 24 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	41ae766 Browse files » ARM: dove: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sascha Hauer committed on 29 Apr 2014
	7b4fb14 Browse files » ARM: Tegra20: Use upstream dtsi files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	99a720c Browse files » ARM: AM33xx: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	d557214 Browse files » ARM: i.MX27: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	cb228a8 Browse files » ARM: i.MX25: Use upstream dtsi file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	903b1d4 Browse files » ARM: Rockchip: switch to multiimage support ... - Add images/Makefile.rockchip - Allow multiple boards to be selected - protect initcalls with appropriate of_machine_is_compatible - rename board specific config to SoC config - Add dtb file to compilation - turn barebox_arm_reset_vectorto ENTRY_FUNCTION - pass dtb to barebox_arm_entry Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
	3bef991 Browse files » ARM: rockchip: add radxa-rock board ... Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	a9c8371 Browse files » ARM: dts: add Rockchip devicetree files ... Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	b28e8d7 Browse files » pinctrl: add rockchip pinctrl and gpio drivers ... Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	af4c8a0 Browse files » clk: add rockchip clock gate driver ... Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	298ecc5 Browse files » clk: gate: add CLK_GATE_HIWORD_MASK flag ... Clock gates having the CLK_GATE_HIWORD_MASK flag set use the upper 16 bits of the register as a "write enable" mask for the value in the lower 16 bits. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	b80f5d5 Browse files » clk: gate: unify enable and disable functions handling ... To avoid code duplication and make easier to introduce new flags. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	32a2a67 Browse files » clk: gate: add flags argument to clock gate constructor ... This adds a clk_gate_flags argument to clock gate creation functions to allow the introduction of new clock gate modifiers. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	75c0f6f Browse files » ARM: rockchip: add PLL initialization function ... Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014
	036f0f1 Browse files » ARM: add basic support for Rockchip SoCs ... This patch adds a basic support for the ARM-based Rockchip SoCs of the RK3xxx family. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 27 Apr 2014 Sascha Hauer committed on 29 Apr 2014