LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2018-11-06	30f4a93 Browse files » ARM: at91: make at91sam926x_board_init board specific ... The base addresses used in at91sam926x_board_init() differ with each SoC. The board knows which SoC we are running on though, so create and use SoC specific variants of these functions which pass the appropriate base addresses to at91sam926x_board_init(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	e08031d Browse files » ARM: at91: drop at91_pmc_write()/at91_pmc_read() ... at91_pmc_write() and at91_pmc_read() need a compile time base address, so remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	edd34f7 Browse files » ARM: at91rm9200ek: use plain readl/writel for pmc accesses ... at91_pmc_write() needs a compile time base address, so rather use plain read/writel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f3e537c Browse files » ARM: at91sam926x use writel rather than pmc accessor function ... The pmc accessor function depends on a compile time base address, so rather use writel directly. In this case we can hardcode the base address again since all at91sam926x SoCs have the same pmc base address. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	393bba8 Browse files » ARM: at91: remove mach/io.h ... Remove at91_sys_read() and at91_sys_write() since these are no longer used. This makes mach/io.h empty so remove that aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f0d8a2e Browse files » ARM: at91rm9200 timer: Make system timer defines SoC specific ... - rename at91_st.h to at91rm9200_st.h - rename prefix from AT91_ to AT91RM9200_ - remove register offset from System timer defines Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	f8e1e84 Browse files » ARM: at91rm9200 timer: remove unused include ... at91rm9200_time.c doesn't need anything from at91_pmc.h, remove the inclusion. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	8e04cee Browse files » ARM: at91: remove unused header file ... nothing from mach/at91_tc.h is used, remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	99b0114 Browse files » ARM: at91rm9200: Add SoC namespace to memory controller defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	c67ac51 Browse files » ARM: at91: Use SoC specific base addresses where appropriate ... Replace AT91_ base addresses with their SoC specific variants where possible. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Nov 2018
	adc44f5 Browse files » ARM: socfpga: socrates: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	d5f1385 Browse files » ARM: socfpga: socdk: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	705c74f Browse files » ARM: socfgpa: de0-nano-soc: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	b5d01ad Browse files » ARM: socfpga: sockit: convert to lowlevel helper ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	3925e51 Browse files » ARM: socfpga: add lowlevel header with common code ... Apart from the RAM size, all cyclone5-based Socfpga boards use the same lowlevel code. Instead of duplicating it for every board, move it to mach-socfpga and provide a macro to use it in the boardspecific code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	9984960 Browse files » ARM: rdu2: Replace board code with gpio-hog nodes ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Oct 2018 Sascha Hauer committed on 6 Nov 2018
2018-11-05	c60aa1f Browse files » ARM: rpi: autosize malloc area ... Autosize the malloc area according to the available RAM size. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	94f6a71 Browse files » ARM: rpi: add raspberry pi 3 support ... This adds basic support at the same feature level as the other supported raspberry pi boards. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	5db9fdc Browse files » ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero ... Signed-off-by: Enrico Joerns <ejo@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Joerns authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	6189e25 Browse files » ARM: install HYP vectors at PBL and Barebox entry ... If the CPU was already in HYP mode when entering the PBL, install a simple trap handler to allow to get back from SVC to HYP before switching to HYP mode. As the vectors are part of the currently running binary, we need to do the same setup when starting the real Barebox binary, as the PBL setup vectors might get overwritten. To do this we trap into HYP mode just before jumping to Barebox and then re-do the vector setup and SVC switch as the first thing in Barebox proper. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	45ea4b2 Browse files » ARM: default to starting kernel in HYP mode when entered in HYP ... When Barebox has been entered in HYP mode, there is a high chance that the kernel is intended to be started in HYP mode also. Get this default into place. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	245550b Browse files » ARM: don't try to install secure monitor when entered in HYP mode ... When Barebox has been entered in HYP mode, the CPU is already switched to the non-secure world and it's not possible for Barebox to install it's own secure monitor. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	296fa43 Browse files » ARM: add file for HYP mode related setup ... This adds routines to add hyp mode vectors and switch back to HYP mode from SVC. This is needed in both the PBL and Barebox proper. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	eaa7fcf Browse files » ARM: at91: Add SoC namespace to matrix defines ... Add SoC namespace to matrix define so we have one source less of conflicting defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	d1484e9 Browse files » ARM: at91: remove common matrix header file ... The common matrix header file can be removed when the users include the SoC specific one. Fix the only user and remove the file. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	21d3a53 Browse files » ARM: at91: consolidate phy reset functions ... Many boards have the same ethernet phy reset function, so share the code in a common function. While at it remove the AT91_RSTC offset from the rstc register defines. AT91_RSTC was the offset between the AT91_SYSTEM_BASE and the reset controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	4f9e249 Browse files » ARM: at91: remove AT91_SDRAM_BASE ... AT91_SDRAM_BASE is only used in board code which known the SDRAM base address, so we do not need a common define. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	cd46f9b Browse files » ARM: at91: drop AT91_NB_USART ... AT91_NB_USART only used to return an error from at91_register_uart() if an invalid UART number is passed. This will never happen as the linker fails earlier in that case, so the runtime check can be removed and with it the now unused AT91_NB_USART define. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	61a2217 Browse files » ARM: at91: remove unused defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	24c3bf7 Browse files » ARM: at91sam926x: Add header for at91sam926x common base addresses ... There are some base addresses common to at91sam926x. Add a separate header for these. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018