Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/mmc'

Merge branch 'for-next/missing-prototypes'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/kconfig'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/envfs-sort'

Merge branch 'for-next/e1000'

Merge branch 'for-next/dts'

Merge branch 'for-next/clps711x'

Merge branch 'for-next/am35xx'

ARM: imx8mq: use upstream devicetree ...

The basic DT is upstream now, so we can now reuse this in Barebox.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: imx-v3: imx8mq does use the old binding ...

The upstream discussion concluded on using the same binding as
on previous i.MX SoCs.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: sync imx8mq clock driver with upstream kernel ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx: add imx8mq composite clock ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: add divider_recalc_rate helper ...

Closer to Linux kernel implementation and needed for imx8mq
composite clock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: move struct clk_mux into header ...

To make it reusable in a composite clock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: move struct clk_gate into header ...

To make it reusable in a composite clock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: add missing list.h include ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: core: Fix erase area alignment for non power of 2 erasesize ...

On Thu, Jan 10, 2019 at 09:32:07AM +0100, Sascha Hauer wrote:
> On Wed, Jan 09, 2019 at 12:28:14PM +0100, Ladislav Michl wrote:
> > Devices as AT45DB161 DataFlash uses non power of two page size (528)
> > while present alignment algorithm relies on erasesize being power
> > of 2.
> > Fix that by introducing helper functions rounding to any multiply.
> > Note that logic is sligthly changed to be consistent as ending
> > address is moved forward to include also last byte meant to be
> > erased while previous implementation moved it backward.
> >
> > Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> > ---
> >  drivers/mtd/core.c     | 28 ++++++++++++++++++++++------
> >  include/linux/kernel.h |  5 +++++
> >  2 files changed, 27 insertions(+), 6 deletions(-)
>
> Applied, thanks

Hi Sascha,

I was searching for paper bag, but was unable to find anything thick
enouh to cover behind :-/ This version is buggy and I noticed right
now when testing on another board. Corrected version follows, which
is also 192 bytes shorter for my ARM target. It seems next branch
at https://git.pengutronix.de/ is not yet updated, so perhaps my fault
won't affect anyone.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: core: Fix erase area alignment for non power of 2 erasesize ...

Devices as AT45DB161 DataFlash uses non power of two page size (528)
while present alignment algorithm relies on erasesize being power
of 2.
Fix that by introducing helper functions rounding to any multiply.
Note that logic is sligthly changed to be consistent as ending
address is moved forward to include also last byte meant to be
erased while previous implementation moved it backward.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.0-rc2 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v5.0-rc1 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.20-rc7 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.20-rc6 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2019.01.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8MQ: Add alias for ECSPI1 ...

Add alias for ECSPI1. Without it, the driver will fail to probe due
to:

c6ded00cbd ("spi: i.MX: Fix wrong bus nubering with devicetree")

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>