arm: cfa10036: Add proper resource length ...

The cfa10036 board file were missing the length parameter when adding
devices. This made barebox crash early in the boot, in the mxs-mci
driver.

Provide the resources lengths in a consistent format.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kconfig: remove autogenerated file ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX51 babbage: update defconfig ...

Reenable DEFAULT_ENVIRONMENT_GENERIC_NEW which got lost somewhere.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd mtdraw: fix fixing partial page read ...

toread is unitialized. We have to use count instead.

| commit 992c291
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Sat Sep 15 16:54:47 2012 +0200
|
|    mtd mtdraw: Fix partial page read
|
|    When reading parts of a page we have to limit the maximum bytes copied
|    to the remaining bytes of a page.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/tap: use xzalloc to allocate data ...

this will ensure the data are set to 0 (list as example)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: do not register device before barebox is started ...

This will crash when use registered bus with device registered to it.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: check only image option in the second getopt ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MAKEALL: accept defconfig with '-' in it ...

replace '-' with '_' for the configuration option

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nios2: Fix DMA functions when CPU has no dcache ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM mmu: use xmemalign ...

So we do not silently fail.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Make: Fix if_changed when command contains backslashes ...

The call if_changed mechanism does not work when the command
contains backslashes. This basically is an issue with lzo
and bzip2 compressed kernels. The compressed binaries do not
contain the uncompressed image size, so these use size_append
to append the size. This results in backslashes in the executed
command. With this if_changed always detects a change in the
command and rebuilds the compressed image even if nothing
has changed.

Fix this by escaping backslashes in make-cmd

This was worked out together with Jan Lübbe. The same patch
has recently been accepted to the kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>

mtd mtdraw: Fix partial page read ...

When reading parts of a page we have to limit the maximum bytes copied
to the remaining bytes of a page.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

ARM i.MX6: fix usb_ehci warnings for sabrelite ...

This fixes the following warnings:

arch/arm/boards/freescale-mx6-sabrelite/board.c: In function 'sabrelite_ehci_init':
arch/arm/boards/freescale-mx6-sabrelite/board.c:265:2: warning: implicit declaration of function 'imx6_usb_phy1_disable_oc' [-Wimplicit-function-declaration]
arch/arm/boards/freescale-mx6-sabrelite/board.c:266:2: warning: implicit declaration of function 'imx6_usb_phy1_enable' [-Wimplicit-function-declaration]

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX6: add usb function prototypes ...

Add missing prototypes to mach/usb.h

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: remove undefined local_irq_save/local_irq_restore ...

mips currently uses local_irq_save and local_irq_restore
which are not defined. Drop them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Antony Pavlov <antonynpavlov@gmail.com>

net: tftp: timeout only after a proper amount of time ...

Currently, the timeout when waiting for packages is smaller than the
timeout communicated to the TFTP server for retransmitting. Make sure we
wait at least for two retransmissions before giving up.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX21: Add missing include ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

miidev: fix 1G wrong detection ...

since 99e72c8 on an i.MX51 based board,
I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
the PHY to early and gets 0x3ffff which leads to the wrong capabilities
setting.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tap: fix missing parent setting on eth_device ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: armlinux: get the architecture before shutdown barebox ...

As we may try to get it from the env.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fsl TSEC: register map boundary ...

The end boundary of each registers set may overlap with the start
of the next register set. Subtract 1 to the end boundary.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: mxs: add proper resource length ...

For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: fs.c fix cast ...

Fix casting on min argument, to avoid warnings on 64bit build.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smsc911x: Check platformdata pointer ...

If pdata is NULL smc911x_probe will crash. Checking the zero initialized
priv->shift results in default configuration if pdata is not set.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

uncompress: drop wrong BUG(uncompress_size) ...

As uncompress_size is a static and will set if call uncompress_size multiple
time.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smc911x: fix typo pn check if the device is ready before using it ...

the check need to be inverted

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd/mtdraw: fix format specifier for ssize_t ...

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: use correct format specifier ...

For the size_t type the format specifier %zu or %zx must be used.
See Documentation/printk-formats.txt in the kernel for details.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX51: unbreak FEC iomux ...

in commit 2bdc9f5 the iomux was synced
with the kernel but this leads to some changes in the PAD_CTRL of some
FEC pins leading to a non working FEC on our cpuimx51 board.

This patch set back the PAD_CTRL of the missing pins to the initial
value.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs/nfs: fix read when size < 1024 ...

Currently we always request 1024.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>