LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2012-03-06	beb36c5 Browse files » Merge branch 'work/thumb2' into next Sascha Hauer committed on 6 Mar 2012
	276252a Browse files » ARM: use unconditional branch in exception vectors ... If we want to trap the processer in the exception vectors we have to use unconditional branch instructions. I don't know what I thought when using bne :-/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2012
	104a6a7 Browse files » ARM: Allow to compile in thumb-2 mode ... This shrinks the resulting binary size by ~25%. Exceptions are still handled in arm mode, so we have to explicitely put .arm directives into the exception code. Thumb-2 mode has been tested on i.MX51 Babbage board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2012
2012-03-05	e0d6747 Browse files » mach-omap: add HAS_DEBUG_LL ... Add support for debug_ll Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 5 Mar 2012 Sascha Hauer committed on 5 Mar 2012
2012-03-04	6628b5e Browse files » pca-a-l1: remove duplicate includes ... Removed duplicate includes from phyCARD-A-L1 board code. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 2 Mar 2012 Sascha Hauer committed on 4 Mar 2012
2012-02-29	d3fda04 Browse files » drivers/mci: fix read/write stalling ... If a read or write operation encounters an error, the card might stay in "recv" or "data" state, and never get back to "tran" state. In these cases, the host is required to send a CMD12 (end transmission) to switch the FSM of the card back to "tran" state, as described in MMC Specification, chapter "Data Transfer Mode". Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 27 Feb 2012 Sascha Hauer committed on 29 Feb 2012
	8876de1 Browse files » Merge branch 'pu/command' into next Sascha Hauer committed on 29 Feb 2012
	ff79f7a Browse files » arm/mach-pxa: add mioa701 board ... Add Mitac MioA701 board initial support. The support provides basic boot and : - a console over USB (serial gadget). - the SD card support - the MTD docg3 support - the LCD support Add a check in the default environment for a barebox.env file on the first partition (FAT). If the file exists, source it instead of the normal boot procedure. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 28 Feb 2012 Sascha Hauer committed on 29 Feb 2012
	f67fc4f Browse files » drivers/serial: trivial regression fix ... Fix commit "serial pxa: fix unregister", which forgot a semicolon, breaking serial_pxa compilation. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 28 Feb 2012 Sascha Hauer committed on 29 Feb 2012
2012-02-28	cb1bd90 Browse files » ARM: get runtime offset of board_init_lowlevel_return by using separate section ... We used to get the runtime offset of the board_init_lowlevel_return by doing a &board_init_lowlevel_return. This does not work in thumb-2 mode, so use a separate linker section for this function instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Feb 2012
2012-02-28	2c2d00a Browse files » ARM: move exception vectors away from start of binary ... Traditionally U-Boot and barebox have the exception vectors at the start of the binary. There is no real reason in doing so, because in the majority of cases this data will not be at 0x0 where it could be used as vectors directly anyway. This patch puts the vectors into a separate linker section and defines an head function which is placed at the start of the image instead. Putting this in a separate function also has the advantage that it can be placed at the start of images which require an additional header like several Freescale i.MX images. As the head function contains the barebox arm magic those images can now also be detected as barebox images. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Feb 2012
2012-02-27	4bab39e Browse files » remove unused variable from struct driver_d ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	33d1cc4 Browse files » commands: remove struct command pointer from commands ... This is unused in all commands and thus can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	bb2a1ea Browse files » ARM boot[zu]: return COMMAND_ERROR_USAGE instead of calling barebox_cmd_usage ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	d59925b Browse files » command: do not allow abbreviated commands anymore ... abbreviated commands are derived from U-Boot and are only partly useful. Noone expects from a shell to support this, also we have tab completion. They also have some funny side effects. For example we have a 'time' command. If this command is not compiled in, the time command is interpreted as an abbreviated version of the 'timeout' command. So remove support for abbreviated commands and safe the binary space. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	5c50423 Browse files » mx53-loco: update defconfig ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	96ecdf0 Browse files » mx53-loco: add board revision support ... - this is taken from freescale-mx35-3-stack/3stack.c and allows this board to run Freescale's kernel which relies on the system revision to configure the correct PMIC. - On rev0 boards (with DA9053), the log is : detected i.MX53 rev 2.1 MCIMX53-START board 1.0 On newer boards (rev A or B with MC34708), the log is : mc34708-i2c@mc34708-i2c0: MC34708 ID: 0x0014 detected i.MX53 rev 2.1 MCIMX53-START-R board 1.0 rev B Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	77649c1 Browse files » mx53-loco: add i2c support ... and register mc34708 which is present on MCIMX53-START-R board Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	1270b11 Browse files » i.MX53: enable pull up on I2C0 pins ... this allows I2C to work on boards which don't have external pull up (like LOCO board) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	e27e6a2 Browse files » i.MX53: add silicon revision functions ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	9559018 Browse files » mfd: add mc34708 driver ... this driver is a copie of the mc13892 one Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	64be852 Browse files » add i2c clock support ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	f062e28 Browse files » Add unaligned.h to sandbox arch ... To be able to use the sandbox with fat filesystem support unaligned.h is needed. It tries to be general in selecting little endian or big endian on a gcc macro. Signed-off-by: Lars Poeschel <lars@kiwigrid.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lars Poeschel authored on 27 Feb 2012 Sascha Hauer committed on 27 Feb 2012
	7a61f5d Browse files » cp: fix memory leak ... dst is an allocated string, we have to free it also when copy_file fails. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	aed0e6b Browse files » getopt: save and restore context ... execute_command is the single point where commands are executed and thus a new getopt context is needed. currently we call getopt_reset here to reset the context. This breaks though when a command tries to run a command itself by calling execute_command or run_command. In this case we have to store the context and restore it afterwards. The same is necessary in builtin_getopt. Currently noone does this so this one shouldn't fix a bug, but merely allows us to do such things later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	2034ee4 Browse files » getopt: turn commented out printf into debug() ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
2012-02-25	b482dfd Browse files » driver: remove unused type_data field from struct driver_d ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Feb 2012
	78da28d Browse files » net fec_mpc5200: drop type_data usage ... Also, clean some whitespace damage. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Feb 2012
	89fe548 Browse files » net fec_imx: drop type_data usage ... Store the private data pointer in dev->priv as it's intended. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Feb 2012
	e609cbe Browse files » net drivers: remove unused type_data ... Many net drivers set dev->type_data without ever using it, so just remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Feb 2012