spi: i.MX: Fix wrong bus nubering with devicetree ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: remove efika-mx-smartbook_defconfig ...

The smartbook is covered by imx_v7_defconfig, no need for a separate
config.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

backlight: rave-sp: init all brightness to default level ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: rave-sp: Add parameters to query IP address/netmask ...

Unlike LCD type information, IP address as well as netmaks are not
stored in an easily usable format in RAVE SP EEPROM. In order to obtain
them we need to issue a special command to RAVE SP. For that purpose add
device "sp" and expose that data as a device parameters (sp.ipaddr and
sp.netmask, correspondingly)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clk: imx5: add di_pred ...

This was missing, so the default external DI clock source on i.MX51 was
missing. Also set the divider to a division ratio of 1 initially, to avoid
complicating the logic in the IPU driver further.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: rdu2: add command to reset network switch ...

This command allows to reset the network switch on the DEB,
clearing any DSA configuration, which may still be present from
a prior boot.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phycard-imx27: add support for 64MB RAM variants ...

Some older pca100 boards were available with 64MB RAM. The chips
require a slightly different sdram controller initialization. Support
this by building bootloader images for both variants.

Signed-off-by: Florian Bäuerle <florian.baeuerle@allegion.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add .of suffix to device names from devicetree ...

Previous implementation used to add a number to the device names
for devices registered from the device tree which did not have a 'reg'
property, thus a device node named "state" resulted in a device name
"state.<x>". Current implementation skips that number and we get a
device named "state". This conflicts with our barebox state
implementation which tries to register a device named "state" itself.
We could rename the state device nodes of all our device trees, but it
causes less trouble to rename the devices.

This adds a ".of" suffix to the device names for devices registered from
the device tree which also has the nice effect that they now can easily
be recognized.

Fixes: 7e497d48acbd11 ("of: Port latest of_device_make_bus_id() implementation")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Jan Lübbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubimkvol_add_volume_id_parameter'

Merge branch 'for-next/spdx'

Merge branch 'for-next/socfpga'

Merge branch 'for-next/net'

Merge branch 'for-next/mtd'

Merge branch 'for-next/missing-prototypes'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/dts'

Merge branch 'for-next/checkpatch'

dts: update to v4.20-rc5 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.20-rc4 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.20-rc3 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.20-rc2 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2018.12.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: net: usb: convert drivers to spdx ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: net: phy: convert drivers to spdx ...

Reviewed-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: fix build with OpenSSL < 1.1.0 ...

When adding support for OpenSSL 1.1.x it was missed that EVP_PKEY_get0_RSA
is only available with that version. Earlier versions don't provide a fully
equivalent function, so add it to the compatibility helpers.

Fixes: 542a50d4eb (scripts: imx-image: fix build with OpenSSL 1.1.x)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: add architecture dependecy to KSZ9477_EVB board ...

This board is part of the SAMA5D3 architecture.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: remove non-existent of_match_ptr ...

It's only used in the !OFTREE stub functions, so can be safely removed.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx: select OFDEVICE for VF610 ...

It's a dependency for IMX_OCOTP, which is selected by VF610.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: phytec-som-imx6: Add full featured phyCORE-i.MX 6ULL ...

The phyCORE-i.MX 6ULL now comes in a full featured (Y2 variant) and a
low cost (Y0 variant) version. The main difference for the barebox is
the missing second USB OTG port on the Y0 variant and the RAM configuration.

So to account for these differences the existing low cost version is
renamed and the full featured version added.

The results are following phyCORE-i.MX 6ULL modules:

phyCORE-i.MX 6ULL low cost:
	- i.MX 6ULL Y0
	- 256 MB RAM
	- NAND
	- Ethernet 10/100 MBits
	- USB OTG

phyCORE-i.MX 6ULL full featured:
	- i.MX 6ULL Y2
	- 512 MB RAM
	- NAND
	- Ethernet 10/100 MBits
	- USB OTG
	- USB Host

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>