LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2015-10-07	c8fa7ee Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 7 Oct 2015
2015-10-06	7bf2e89 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 6 Oct 2015
	8a83eca Browse files » Merge branch 'for-next/mci' Sascha Hauer committed on 6 Oct 2015
	ddd7031 Browse files » Merge branch 'for-next/imx-ldb' Sascha Hauer committed on 6 Oct 2015
	160bd3b Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 6 Oct 2015
	fbf9f5f Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 6 Oct 2015
	v2015.10.0 0b8212a Browse files » Release v2015.10.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Oct 2015
2015-10-05	694c5b8 Browse files » Revert "spi: i.MX: optimize transfers for ECSPI v2.3" ... This does not work on the Efika MX Smartbook which uses SPI to connect the MC13892. Needs some rework. This reverts commit `746a553`. Sascha Hauer committed on 5 Oct 2015
2015-10-02	329db2f Browse files » mci: core: Increase clock for SD highspeed mode ... Putting a SD card into highspeed mode doesn't help much when we still clock the card with 25MHz. Increase the clock speed to 50MHz for high speed cards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2015
2015-10-02	1c9e671 Browse files » commands: ls: use 14 digits for filesize ... 10 digits are not enough for modern SATA/USB storages. E.g.: barebox> ls -l /dev/ cr-------- 500107862016 ata0 cr-------- 33554432 ata0.0 cr-------- 500073258496 ata0.1 cr-------- 32224837632 disk0 cr-------- 67108864 disk0.0 cr-------- 32156680192 disk0.1 14 digits look much better. E.g.: barebox> ls -l /dev/ cr-------- 500107862016 ata0 cr-------- 33554432 ata0.0 cr-------- 500073258496 ata0.1 cr-------- 32224837632 disk0 cr-------- 67108864 disk0.0 cr-------- 32156680192 disk0.1 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 2 Oct 2015 Sascha Hauer committed on 2 Oct 2015
2015-10-01	e69b95f Browse files » fs: syntax fix in ramfs.c ... Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Stefan Christ authored on 30 Sep 2015 Sascha Hauer committed on 1 Oct 2015
	a55684a Browse files » ARM: i.MX: GuF Santaro: Fix panel support ... The backlight enable gpio is in both the ldb node and the panel node. Remove it from the ldb node where is was unused and fix the polarity in the panel node. Also make the panel compatible to simple-panel to let the driver match it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	6d39ac3 Browse files » ARM: i.MX: GuF Santaro: enable PWM ... The PWMs now have to be enabled to use them. Enable the backlight PWM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	6589473 Browse files » video: backlight-pwm: Add regulator support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	7bc30c8 Browse files » video: backlight-pwm: Add error message ... Inform the user when we can't find a pwm for the backlight driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	ec54ba6 Browse files » video: ipuv3: print error message when no modes are found ... This is a common error, so print a message to inform the user what went wrong. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	80e3f29 Browse files » video: simple-panel: Add support for device tree provided nodes ... This adds support for display timings provided from device tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	3dd4a3c Browse files » video: simple-panel: Add debug/error messages ... Let the driver be more informative when something goes wrong. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	7055047 Browse files » video: ipuv3: imx-ldb: Support video modes in ldb node ... We used to support video modes directly in the ldb device node, that was lost in: 5bda17e video: ipuv3: Replace ipu_output with VPL. Add this support back. Also drop duplicate vpl ioctl forwarding for several calls. With this patch modes can either be retrieved from the ldb node as originally done or from the panel remote port. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	dd80c59 Browse files » video: ipuv3: imx-ldb: remove unused variable ... endpoint is set but not used. Remove the code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	e8e3877 Browse files » video: ipuv3: Do not crash when no mode is found ... When something is missing in the device tree or not all necessary drivers are compiled in it may happen that no valid mode is found. Do not crash in this case but print an error message. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Oct 2015
	7045886 Browse files » video: imx-hdmi: Remove unused 'regmap' structure ... As regmap is not used in Barebox we can remove this field from the imx_hdmi struct. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Fabio Estevam authored on 30 Sep 2015 Sascha Hauer committed on 1 Oct 2015
2015-09-29	4a13798 Browse files » net: dhcp: Fix CONFIG variable name ... Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Wadim Egorov authored on 28 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	e94d1eb Browse files » state: check return value of of_property_count_strings ... When a enum32 state variable node does not have a "names" property bail out instead of continuing with an error value used as number of strings. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Sep 2015
	2a34749 Browse files » state: write names in enum32 variables to oftree again ... Commit 179b75a (state: fixup: only export default value during fixup if set) accidently removed writing the enum32 value names to the device tree. Add it back again Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Sascha Hauer committed on 29 Sep 2015
	46c1454 Browse files » eukrea-cpuimx25: update defconfig ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	d7f19aa Browse files » eukrea-cpuimx25: enable dfu sequence conditionaly ... this can be useful on the evaluation board but we don't want the sequence to launch on custom board when there is not the switch button on gpio 82 Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	a266d59 Browse files » eukrea-cpuimx25: setup usb through chipidea-imx driver ... OTG and HOST port are tested with a mass storage device. Signed-off-by: Florian Vallee <fvallee@eukrea.fr> Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Florian Vallee authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	4f04790 Browse files » imx25: register usb-misc by default ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015
	39b0eb3 Browse files » chipidea-imx: allow phymode configuration in pdata ... it's currently only handled through DT and for i.MX25 OTG port (at least), we need to configure portsc to get host mode working but it actually fails as ci->phymode is 0 which is USBPHY_INTERFACE_MODE_UNKNOWN Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Sep 2015 Sascha Hauer committed on 29 Sep 2015