common: menu needs PROCESS_ESCAPE_SEQUENCE ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: fill BUILTIN_DTB_NAME for boards that still use this option ...

There are only a few users of BUILTIN_DTB left, but those should
alsways fill thr name properly. Avoids lots of failures in the
randconfig builds.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: don't allow to select BUILTIN_DTB when building multiimage ...

It doesn't make sense to allow building in a single DTB into a
multiimage barebox, so we can spare the user this option.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: esdhc: add back PIO_TIMEOUT ...

This got lost during bd1bf53b34c
(mci: imx-esdhc: factor out common sdhci registers). Seems the PIO
option isn't too heavily used.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

video: ipuv3: select OFDEVICE for HDMI and LVDS ...

Both components need the OF display timings helpers.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx: nand update handler depends on MTD layer ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx: select I2C for all boards that need it in their board init ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx: select MFD_MC13XXX for all boards that need it ...

This was only done for some of the boards and while it is ok to build
those boards without regulator support it may potentially yield non-working
barebox binaries. This is clearly not what the user wanted.

Also select the appropriate bus support needed for the MC13xxx.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: firmware: include libfile ...

Fixes
common/firmware.c:206:2: error: implicit declaration of function 'copy_file'
in a number of configuration where this file isn't pulled in through
other headers.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

firmware: altera-serial: fix printf message ...

Fixes:
.../altera_serial.c:118:2: warning: too many arguments for format

Also sz is of type size_t, so use proper format specifier.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

firmware: altera-serial: don't try to check void return value ...

Fixes:
.../altera_serial.c:84:6: error: void value not ignored as it ought to be

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

firmware: altera-serial: depend on SPI ...

This driver uses SPI bus functions.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

firmware: socfpga: depend on ARCH_SOCFPGA ...

This driver uses a lot of arch specific functionality and
fails to build on anything but SOCFPGA.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: ubi: get_bad_peb_limit from mtd master ...

Like mentioned in the coment we need the size of the entire flash chip.
Check if a master exists and take his size.

Otherwise the limit will be too small and kernel prints:
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for \
bad PEB handling, reserved 19, need 20

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pci: tegra: relax link-up timeout ...

Some devices need a considerable amount of time
from reset deassertion until they are ready to
establish a link. Relaxing the link-up timeout
helps to detect them more reliable.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pci: align bridge windows ...

The bridge filtering logic needs a minimum
alignment of 1MB for mem and 4KB for io resources.
Take this into account while assigning resources
to devices in oredr to not produce overlapping
windows between different bridges.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pci: correct BAR size calculation ...

The previous math would return negative sizes
for some BARs.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

xymodem: select CRC16 from lib ...

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

command: memset: Fix argument order in help text ...

memset takes ADDR DATA COUNT just like the C function, not
ADDR COUNT DATA.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pci: mvebu: Fix uninitialized variable in mvebu_get_target_attr() ...

This is the same fix that was applied to the Linux kernel in commit
56fab6e18944 (PCI: mvebu: Fix uninitialized variable in
mvebu_get_tgt_attr()).

Fixes: 5a9ba98 ("pci: mvebu: Add PCIe driver")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand_orion: remove unused goto label ...

This fixes the following warning:

	drivers/mtd/nand/nand_orion.c: In function ‘orion_nand_probe’:
	drivers/mtd/nand/nand_orion.c:145:1: warning: label ‘no_res’ defined but not used [-Wunused-label]

Fixes: 1a215f5 ("nand: Add Marvell Orion NAND driver")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: avoid symbol conflict for fstat ...

Recently, a fstat function was added to barebox. Redefine it as usual
to avoid problems for the sandbox. This fixes loading files into the
sandbox.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

blspec: fix incompatible pointer type warning ...

The warning is correct in that we pass in size_t instead
of int. As we are not interested in the size of the
property at this point, just remove the assignment.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: mach-imx: fix Eukrea CPUIMX51 Kconfig string ...

Was accidently preplaced by the Karo-TX 51 string,
restore the previous state.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: imx53-qsrb: fix initcalls on START-R board ...

The compatible changed when we switched to the upstream
DTs, so the initcalls would not be executed on the START-R
board.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/xz'

Merge branch 'for-next/tegra'

Merge branch 'for-next/nitrogen6x'

Merge branch 'for-next/mxs'

Merge branch 'for-next/misc'