Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/menu'

Merge branch 'for-next/imx'

Merge branch 'for-next/defenv-2'

Release v2016.09.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX50: Add iomux definitions for non-DT board implementations ...

Add non-DT IOMUX definitions for the i.MX50 SOC by converting linux
dts/imx50-pinfunc.h by script.
perl -we 'while(<>) {
 next unless /^#define MX50_PAD/;
 @in=split "[[:space:]]+", uc($_);
 @out=();
 @out[0..4]=@in[3, 2, 5, 4, 6];
 $out[2] =~ s/0X//;
 $out[4] =~ s/0X//;
 $out[3] = "__NA_" if $out[3] eq "0X000";
 push @out, $in[1] =~ /__UART/? "MX50_UART_PAD_CTRL": "NO_PAD_CTRL";
 $out=join(", ", @out);
 $out =~ s/0X/0x/g;
 print "#define $in[1]\t\t\tIOMUX_PAD($out)\n";
}' < dts/src/arm/imx50-pinfunc.h

Additional changes:
* typical PAD settings for UART, SPI, I2C and ESDHC
* SION bits set for all I2C MUX options

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add i.MX50 support ...

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX drivers: enable i.MX50 where already supported ...

The i.MX50 SOC includes one ESDHCv3, three ESDHCv2, one cspi and
two ecspi instances which are supported by existing drivers.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX clock: cleanup imx50 incompatibilities ...

Move all MX5 clock functionality which does not apply to i.MX50 to
a new mx51_mx53 related function.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx: add support for i.MX50 ...

Add imximg support for i.MX50 processors which use the i.MX flash
header v2 format.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: add common definitions for i.MX50 SOC ...

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

xstrdup: don't panic on xstrdup(NULL) ...

Instead return just NULL. This matches the behaviour of kstrdup in the
kernel and xstrdup in busybox.

This fixes a panic with CONFIG_CMD_MAGICVAR=y and
CONFIG_CMD_MAGICVAR_HELP unset in magicvar_add() where description is
always NULL.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: aarch64-qemu-virt: fix sphinx issues ...

The patch fixes these sphinx issues:

    barebox/Documentation/boards/aarch64-qemu-virt.rst:7: WARNING: Title underline too short.

    Running barebox on QEMU aarch64 virt machine
    ^^^^^^^^^^^^^^^^^^^^^^^
    barebox/Documentation/boards/aarch64-qemu-virt.rst:1: ERROR: Document or section may not begin with a transition.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: usb: fix sphinx warning ...

The patch fixes this sphinx warnings:

    barebox/Documentation/user/usb.rst:61: WARNING: Could not lex literal_block as "c". Highlighting skipped.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: ubiupdatevol: confirm success with return value 0 ...

Treat the write() case analogously to the read() case and do not return the
number of most recently written bytes as the status of sucessful command
execution.

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: ubiupdatevol: store return value of read() in a signed int ...

With an unsigned int test for errors from read() can never become true.

Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: mmci: Fix read FIFO handling ...

According to the Linux kernel and the qemu code, the MMCIFIFOCNT contains
the remaining number of words to read, excluding those that are already in
the FIFO. So the current number of bytes in the FIFO is
host_remain - (readl(base + MMCIFIFOCNT) << 2).

Also writing to MMCIDATACTRL will reset the read counter. As a result,
MCI_DATABLOCKEND is never set and read_bytes() waits forever.

With this change, SD-Card support on qemu vexpress works correctly.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix small typo in common/Kconfig ...

Fix small typo frendly -> friendly

Signed-off-by: Sam Van Den Berge <sam.van.den.berge@telenet.be>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: saveenv: exit on invalid option ...

Saveenv should not perform any actions if an invalid parameter was
given.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: i.MX chipidea: Enable VBUS regulator when needed ...

We should enable VBUS only in host mode, not unconditionally
during probe(). Fix that.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: scripts: Fix a bug in imx-image ...

In order to clear a bitmask, "Set" bit has to be '0' and "Mask" bit
'1'. Since "Set" is bit 4 and "Mask" is bit 3 this leaves us with a
overal or-mask of 1 << 3. Orginal code was doing the inverse and setting
bit #4 to '1' bit #3 to '0'.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-usb-loader: cleanup DCD v2 processing ...

Re-Implement the DCD v2 processing.
Processing for the DCD write command went into a separate function enabling
the over-all DCD processing to handle check, nop and unlock commands as well.
The trivial NOP command is supported right away.
Further changes: put in some data consistancy checks and error handling, do
structured member access and proper endianess handling and direct error
messages to stderr.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_unflatten_dtb(): Check return value with IS_ERR ...

Of_unflatten_dtb returns a ERR_PTR value so checking it against NULL is
incorrect. Fix it in all of the places where this was happening.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rework menu so that it can support multiline titles ...

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Santaro: Add PBL console support ...

To be able to use PBL console do the usual
relocate_to_current_adr()/setup_c() dance and call pbl_set_putc() to
tell the PBL console where the UART is.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Santaro: Add USB support ...

Enable usbotg and usbh1 devices to gain USB support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX6 Santaro: Add enable-delay for the display ...

The display needs a time to settle, set an enable-delay
of 200ms to avoid flickering.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: chipidea i.MX: Do not return unnecessary error ...

We only allow to setup the host/peripheral role once, when it's already
set then we return -EBUSY.
Return 0 instead when we set the same role again and only return -EBUSY
when we actually try to change the role.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

blspec: Handle nfs:// pathes from boot ...

Fixes: cb47dde boot: Call blspec_scan_directory() only on strings containing an absolute path

This commit introduced a check if the path contains a '/' at the
beginning. For booting a bootloader spec entry from NFS we have to
test the path for starting with "nfs://" aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>