LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2011-08-26	e8d4f5a Browse files » Merge branch 'next' Sascha Hauer committed on 26 Aug 2011
	v2011.09.0 22d49d5 Browse files » Release v2011.09.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Aug 2011
	943b271 Browse files » cfi_flash: support of u32 cmd ... Some NOR flash chips have commands with length greater than the maximum value size of uchar. Based on an U-Boot Patch by Vasiliy Leoenenko <vasiliy.leonenko@mail.ru> Only tested with little endian on an intel cfi_flash. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 25 Aug 2011 Sascha Hauer committed on 26 Aug 2011
2011-08-25	d61e266 Browse files » phyCORE-i.MX27: Keep frequency multiplier enabled to be able to do a warmstart ... commit `7d25a05` Author: Juergen Beisert <jbe@pengutronix.de> Date: Thu Nov 25 17:49:11 2010 +0100 Keep frequency multiplier enabled to be able to do a warmstart The wachtdog's reset does only reset the ARM core, not the whole silicon. But the PLLs seems to do some strange things: It seems they switch back to the low frequency reference when the watchdog barks. But in the case the frequency multiplier is off (not used due to 26 MHz reference usage) the machine stops, because the PLLs are stopping due to the lack of a reference frequency. As the power on reset will set the FPM_EN bit again, a power cycle brings the machine back to life. By keeping the frequency multiplier enabled, also a warmstart triggered by the watchdog can restart the machine now. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 25 Nov 2010 Sascha Hauer committed on 25 Aug 2011
2011-08-25	3f4eb71 Browse files » iomux-mx25: fix MDIO pin configuration ... According to the datasheet, PUE is not effective without PKE set. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Paul Fertser authored on 24 Aug 2011 Sascha Hauer committed on 25 Aug 2011
2011-08-24	aaf2d02 Browse files » ARM i.MX51: setup SD1/2 iomux pins ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Aug 2011
	a4c4c4f Browse files » ARM i.MX51: fix SD1/2 iomux pads ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Aug 2011
	aa4ff56 Browse files » ARM i.MX27: Add spi2 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Aug 2011
	0f7139b Browse files » Merge branch 'pu-env' into next Sascha Hauer committed on 24 Aug 2011
	6402ae2 Browse files » ARM i.MX51: set barebox_loc according to boot source ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marc Reilly <marc@cpdesign.com.au> Sascha Hauer committed on 24 Aug 2011
	c1f8427 Browse files » ARM i.MX25/35: initialize barebox_loc earlier ... Now that env_push_context is in a coredevice_initcall we can initialize barebox_loc earlier so that we can use it inside later initcalls. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> tested-by: Marc Reilly <marc@cpdesign.com.au> Sascha Hauer committed on 24 Aug 2011
	1e926b8 Browse files » put env_push_context into postcore_initcall ... env_push_context only needs malloc, so initialize it earlier. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> tested-by: Marc Reilly <marc@cpdesign.com.au> Sascha Hauer committed on 24 Aug 2011
	e705ccd Browse files » nor: Add SPI flash driver ... This patch adds the m25p80 driver. It has been ported from Linux. MTD code has been removed. It has been tested with a m25p40 chip and the Altera SPI master driver. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 24 Aug 2011 Sascha Hauer committed on 24 Aug 2011
	d7bb455 Browse files » nios2: Add Altera SPI master driver ... Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 24 Aug 2011 Sascha Hauer committed on 24 Aug 2011
	aa28595 Browse files » ARM pcm043: New NOR Flash CS0 values ... Set new CS0 values for new NOR-Flashes (28F256P33BF). These values also work with older flashes (28F256P33B). Also removed unnecessary setup of CSO in the core_init call. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 24 Aug 2011 Sascha Hauer committed on 24 Aug 2011
	2215e51 Browse files » ARM: mx53loco: Fix DD3 initialization ... Updated mx53 ddr3 script in order to align with the latest Freescale version from July 8, 2011: -change ESDREF[REF_SEL]=01 (for 32KHz), from incorrect setting of 00 (64KHz) -change DDR3 MR0 write to "setmem /32 0x63fd901c = 0x052080b0" from "0x092080b0". This changes write recovery from 8 clocks to 6 clocks(in line with ESDCFG1[tWR]) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Fabio Estevam authored on 23 Aug 2011 Sascha Hauer committed on 24 Aug 2011
	e064ad3 Browse files » ARM linux: support Linux images with CONFIG_AUTO_ZRELADDR ... These images have to be located in the first 128MB of SDRAM, so use the following strategy: - first try to map the image. If the pointer is within the first 128MB of sdram everything is fine. - if we can't map the image, check for SDRAM being smaller than 128MB we can use malloc for allocating space for the image. - As a last fallback we simply put the image to 8MB into SDRAM. This is not very clean. We try our best by checking that we won't overwrite the malloc space. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Aug 2011
2011-08-23	420bd69 Browse files » ARM pcm043: New RAM timings ... Update RAM timings with extended row cycle delay. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 28 Jul 2011 Sascha Hauer committed on 23 Aug 2011
	140f7dd Browse files » ARM pcm043: Check silicon revision to set up cpu freq correct ... Some older pcm043 only work correct when cpu frequency is set up to 399MHz. All modules with revision >= 1315.4 are equipped with a i.MX35 TO2.1 and do run with 532MHz. Check the silicon revision and set up the frequency accordingly. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 23 Aug 2011 Sascha Hauer committed on 23 Aug 2011
	f34bb40 Browse files » commands/loads.c: fix whitespace errors & formatting ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Aug 2011 Sascha Hauer committed on 23 Aug 2011
	4ffd4de Browse files » commands/loads.c: make do_* functions static ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Aug 2011 Sascha Hauer committed on 23 Aug 2011
	251af93 Browse files » commands/loads.c: fix compiler's warning ... Fix 'assignment discards qualifiers from pointer target type' warning. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Aug 2011 Sascha Hauer committed on 23 Aug 2011
	7d9ee32 Browse files » commands/loads.c: make it compile again ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Aug 2011 Sascha Hauer committed on 23 Aug 2011
	93db10e Browse files » remove LOADS_BAUD_CHANGE from broken commands/loads.c ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 22 Aug 2011 Sascha Hauer committed on 23 Aug 2011
2011-08-17	5067d9b Browse files » ARM i.MX51: set barebox_loc according to boot source ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Aug 2011
	d29842a Browse files » ARM i.MX25/35: initialize barebox_loc earlier ... Now that env_push_context is in a coredevice_initcall we can initialize barebox_loc earlier so that we can use it inside later initcalls. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Aug 2011
	0cdde37 Browse files » put env_push_context into postcore_initcall ... env_push_context only needs malloc, so initialize it earlier. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Aug 2011
	ba13dc4 Browse files » Merge branch 'pu' into next Sascha Hauer committed on 17 Aug 2011
	7988401 Browse files » devinfo: beautify output ... Files associated to a device showed up in a long list. Instead, print them in seperate lines and also show offset/size information Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Aug 2011
	c574a0d Browse files » spi: make the spi devices children of the parent bus ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Aug 2011