LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2013-12-06	e9ea6ee Browse files » Merge branch 'for-next/misc' ... Conflicts: scripts/Makefile Sascha Hauer committed on 6 Dec 2013
	18aa868 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 6 Dec 2013
	0cb6f2c Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 6 Dec 2013
	28124d0 Browse files » Merge branch 'for-next/hush' Sascha Hauer committed on 6 Dec 2013
	2789ccd Browse files » Merge branch 'for-next/gpio' Sascha Hauer committed on 6 Dec 2013
	cac8f8d Browse files » Merge branch 'for-next/clk' Sascha Hauer committed on 6 Dec 2013
	v2013.12.0 8fc3a93 Browse files » Release v2013.12.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Dec 2013
2013-12-04	1e7f2bd Browse files » scripts: bareboxcrc32 as host and target userspacetool ... This patch adds the crc32 command to be build as host and optionally as target tool. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
	28c1421 Browse files » MIPS: import exception registers saving from linux kernel ... Checking registers saving: $ make qemu-malta_defconfig $ make ... $ qemu-system-mips -nodefaults -M malta -m 256 \ -nographic -serial stdio -bios ./barebox-flash-image ... barebox:/ md -l 0x03 Ooops, address error on load or ifetch! $ 0 : 00000000 00000000 ffffffff 0000003f $ 4 : 00000000 ffffffff 00000004 00000004 $ 8 : 00000003 a0404d50 00000001 00000002 $12 : a0404d50 0000000a a0840000 00000003 $16 : 00000100 a0404d50 00000100 00000003 $20 : 00000000 a0406cd8 00000000 00000000 $24 : a083b4d8 a083058c $28 : 00000000 a03ffca8 a0406ab0 a0830604 Hi : 00000000 Lo : 00000040 epc : a083056c ra : a0830604 Status: 00000006 Cause : 00000410 Config: 80008482 ### ERROR ### Please RESET the board ### Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
	ddac4f3 Browse files » MIPS: add asm-offsets.h generation ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 3 Dec 2013 Sascha Hauer committed on 4 Dec 2013
2013-12-03	f87af10 Browse files » ARM: i.MX6: add initial support for SolidRun Cubox-i Carrier-1 ... Tested to work: - MMC - USB - Ethernet Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 2 Dec 2013 Sascha Hauer committed on 3 Dec 2013
	c5ff280 Browse files » net/phy: add driver for atheros PHYs ... Based on Linux kernel 3.12 driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 2 Dec 2013 Sascha Hauer committed on 3 Dec 2013
	fbf502a Browse files » ARM: i.MX external NAND boot: Add missing instruction cache invalidate ... Before we jump to SDRAM where we just copied our code we have to invalidate the instruction cache. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2013
2013-12-02	6e66ab7 Browse files » mtd: mtdraw: drop ioctl callback for mtdraw device ... Do not call mtd_ioctl for mtdraw devices. mtd_ioctl will derefence the priv pointer to a struct mtd_info whereas with mtdraw devices it will be a struct mtdraw pointer. We do not need ioctls for mtdraw devices, so drop it instead of fixing it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Dec 2013
	a110994 Browse files » ARM: Karo TX25: Enable debug uart early ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Dec 2013
	3febd4d Browse files » ata: pata-imx: Add missing NULL entry in dt ids ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Dec 2013
	35d64bb Browse files » mmci: add missing depends on ARM_AMBA ... The mmci implementation uses some specific arm amba functions, so add a depends on ARM_AMBA. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 27 Nov 2013 Sascha Hauer committed on 2 Dec 2013
2013-11-27	b4184e3 Browse files » scripts: imx-image: Add i.MX25 support ... The i.MX25 works like the i.MX51, just add the SoC magic and the USB product id. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013
	da8fad0 Browse files » ARM: imx: karo tx25: Add config file for imx-image ... Currently unused in barebox, but useful for bootstrapping a tx25 from USB where a imx-image is needed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013
	812c6f2 Browse files » Fix endless loop in automount code ... A chdir to a path registered as an automount path followed by a 'ls' results in an endless loop. This happens because the command the automounter executes results in another automount request. Fix this by running the automounter from the chdir code before the cwd is actually changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Nov 2013
	239699f Browse files » commands: of_node fix descripion ... Remove copy and paste error Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 26 Nov 2013 Sascha Hauer committed on 27 Nov 2013
2013-11-26	ce0ccef Browse files » ARM: start: fix fdt inside valid memory check ... We want to check whether boarddata contains a valid dtb if it's inside valid memory. This includes the base of SDRAM, so use '>=' instead of '>'. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Nov 2013
	a83f635 Browse files » common Kconfig: disable unused options for SHELL_NONE ... Let commandline editing and long help depend on !SHELL_NONE. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Nov 2013
	915976f Browse files » common Kconfig: Add missing depends on ... CONFIG_MAXARGS is only used with the simple console support, so add a 'depends on'. While at it, move it below the shell selection. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Nov 2013
2013-11-25	7614ee1 Browse files » net: phy: Fix get_phy_device return value ... A function should either return an ERR_PTR or NULL on failure, but not both. Let get_phy_device() return an ERR_PTR and fix the return checks in mdiobus_scan and phy_device_connect. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Nov 2013
	f961069 Browse files » ARM: i.mx53: Support for Voipac board with X53-DMM-668 module. ... Device definitions is read from the devicetree description. The board support is using 'multiboard' approach. Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config-board create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash-header-imx53-vmx53.imxcfg create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c create mode 100644 arch/arm/dts/imx53-voipac-bsb.dts create mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rostislav Lisovy authored on 20 Nov 2013 Sascha Hauer committed on 25 Nov 2013
	5c1846b Browse files » ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree ... Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rostislav Lisovy authored on 20 Nov 2013 Sascha Hauer committed on 25 Nov 2013
	bb7929a Browse files » of: gpio: Add Kconfig variable to depend on ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Nov 2013
	94e0337 Browse files » OMAP4: fix omap4_bootsource regression ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 23 Nov 2013 Sascha Hauer committed on 25 Nov 2013
	5892350 Browse files » OMAP4: fix writel data/address swap regression ... Broken since: \| commit `72e561b` \| Author: Sascha Hauer <s.hauer@pengutronix.de> \| Date: Fri Jul 19 12:07:05 2013 +0200 \| \| ARM: omap4: Use writel where appropriate \| \| Instead of making a pure 32bit write to a read/modify/write \| operation with sr32 use writel directly. This saves a few bytes \| of binary space. \| \| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> \| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 23 Nov 2013 Sascha Hauer committed on 25 Nov 2013