menu: fix support for "\n", "\n\r" and "\r" ...

If "\n\r" or "\r\n" is ignore one.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

menu: fix non command management support ...

the auto select is always available

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

menu: fix double action when "\n\r" or "\r\n" is received ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: fix driver name ...

use the usb_driver name

otherwise we will have a NULL driver entry in devinfo

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

tny-a926x: fix MOB-TNY-MD2 Motherboard support ...

The MD2 add:
 - uart 2
 - ethernet
 - usb
 - spi
 - i2c

so fix just add uart and ethernet

update defconfig
always enable the motherboard and drop the SHA256 support (to fix in the
256KiB).

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91: at91_register_uart use number instead of IDs ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

mtd: docg3 fixes backport from Linux kernel ...

Backport 2 fixes back from Linux kernel (title verbatim from
Linux kernel log) :
 - docg3 fix in-middle of blocks reads
 - docg3 reduce read alignment burden

These 2 enable partial reads from the MTD (ie. read only the
111 first bytes), which enable linux kernel booting or UBIFS
from barebox.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: pxamci poweron ramp delay ...

As per MMC spec, once power has been applied to an SD card, the card
can take as much as 250ms to complete its power-up cycle, and become
responsive to CMD0.

When this delay was not in place, activating the SD card in the env
init failed sometimes. With it, no more failure are observed.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: pxamci fix R1b responses ...

The pxamci driver was not waiting for the BUSY line to be
deasserted. This was specifically breaking the CMD12 at
the end of block multiple writes, when the SD card had not
time enough to commit the last write.

Fix it by waiting for PRG_DONE bit (which is actually the
busy signal end condition).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: pxamci fix CMD12 handling ...

The pxamci requires a bit to be set in the command control
register when a CMD12 is sent. Set it, as required in the
PXA Developer Manuel, chapter "Stop Data Transmission
Command (CMD12 or IO/Abort with CMD52)".

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: pxamci fix response type ...

When preparing a command, apply a mask so that only the command part
will be used for the switch case. This will be more robust
for future command response types.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: pxamci change clocks handling ...

Fix clock handling accordingly to PXA manual :
 - enable the MMC controller clock once and for all
 - only disable the MMC bus clock when changing the MMCLK by
 adjusting the clock ratio, else let the controller and SD
 card shut down the clock as the see fit.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: pxamci define timeouts ...

Instead of using hard encoded values in the code, use defines to setup
the timeouts of reads/writes/commands.
Fix the read timeout as defined in the PXA Developer Manual.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

filetype: Make it work on files < 512 bytes ...

This is a brown paper bag type of bugs. Do not assume that a file
has to be at minimun 512 bytes to be detectable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

addpart: remove duplicate line in help text ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

menuconfig: Show "Barebox", not "Linux" at the top. ...

The menuconfig configures Barebox, not the Linux kernel, so no reason
to print "Linux" there.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv/update: fix dhcp-barebox support ...

call dhcp when ip mode is dhcp-barebox

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Define barebox_loc magic variable only once ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'work/cfi-fixes'

at91rm9200ek: set maximum nor flash size ...

it's 8MiB.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fixup DRIVER_VIDEO_S3C24XX usage. ...

From c67445d Mon Sep 17 00:00:00 2001
From: Uwe Hermann <uwe@hermann-uwe.de>
Date: Fri, 6 Apr 2012 20:07:12 +0200

DRIVER_VIDEO_S3C was renamed to DRIVER_VIDEO_S3C24XX recently.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>

PCM-038: fix SRAM device name ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9g45_devices: fix warning ...

this patch fix the following warnings :
arch/arm/mach-at91/at91sam9g45_devices.c:305:3: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/arm/mach-at91/at91sam9g45_devices.c:309:3: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fix mxs iomux error in mx23 case ...

e62edd3 mxs: Fix support for BITKEEPER() macro
added this macro in iomux-imxc.c but the macro is not present
in the i.MX23 case. Adding it in iomux-imx23.h fix both
imx23evk_defconfig and chumbyone_defconfig

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx27-regs: fix .h usage in assembly file ...

7ab0a0a i.MX27: Added helper for setup chipselect control register
added an helper which triggers the following error :
arch/arm/mach-imx/include/mach/imx27-regs.h:243: Error: bad instruction `static inline void imx27_setup_weimcs(size_t cs,unsigned upper,unsigned lower,unsigned addional)'

This patch fix this problem.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'next'

Release v2012.04.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cfi flash: Fix alignment problem ...

The intel cfi buffer write has a problem with writing when
the alignment of the buffer in memory is smaller than the
flash bus width.

This patch fixes a alignment problem which may show during this
scenario:
- 32 or 64 attached NOR flash
- flashing an image directly from network to the nor flash

The involved network driver is "smc9111.c".

The data that comes from the network stack and should be written into
the flash isn't 32 bit aligned (at least with this network driver).
This is probably due to the 48 bit wide ethernet addresses.

However the "cfi_flash.c" driver doesn't handle this situation, and
accesses the not-aligned address with a 32 bit pointer.

This patch fixes the problem by reducing the access width if an
aligment problem between source and destination is found.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cfi flash: Fix loop count calculation ...

'reduce the number of loops by the width of the port' means
a simple len / width. Do not try to be clever by shifting
and doing it wrong.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ping: do not retry endlessly ...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>