LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2013-05-30	1f0a317 Browse files » of: Add of_alias_get function ... This is used to retrieve the name of the alias for a given devicenode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	abee214 Browse files » mci: set name of mci device to same name as the filename ... We already have the possibility to register a mci with a certain filename to get persistent names. However, the device needed to find the probe parameter still has the name 'mcix'. This patch changes this by registering the mci device with the same name as the filename. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	895c0be Browse files » mci: embed mci device into struct mci ... To safe a separate allocation and to make the code simpler. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	c68feb4 Browse files » mci: make mci device a pure device ... No need to match and probe the device if all that we want is a logical deivice for the mci. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	73b0d22 Browse files » driver: Attach info callback to device, not to driver ... Since the info is device specific and not driver specific, attach the callback to the device. This makes it possible to have a info callback for a device which does not have a driver attached. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	4a4f2f2 Browse files » mci: Add support for MMC boot partitions ... Some MMC cards support boot partitions. These are special regions on the MMC card intended to put a bootloader on. This patch adds support for these partitions, they are accessible as /dev/diskx.boot[0\|1]. Additionally the partitions can be configured bootable using a device parameter. This can be used to mark the user area or one of the boot partitions as bootable. Since this feature is mostly seen on eMMC cards it is made optional to lower the size impact for boards which do not have eMMC. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	93b1578 Browse files » mci i.MX esdhc: Fix clock divider calculation ... This updates the i.MX esdhc divider settings to FSLs U-Boot. Current timings work fine for SD cards, but not for eMMC. Although the calculation is fine according to the datasheet and reading from eMMC works, writing is broken. Atleast on i.MX53/tqma53. With this patch the result is the same, but uses different divider values to achieve it. While at it, replace the udelay with a busy-loop. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	2f2329f Browse files » MCI: Sort Makefile entries ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
	425bf8b Browse files » ARM: OMAP MCI: Move TWL6030 power initialization into OMAP directory ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
	2821446 Browse files » Added sd driver for bcm2835 (Raspberry PI) ... Replaced defines according to sdhci.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> wilhelm authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
	bd1bf53 Browse files » mci: imx-esdhc: factor out common sdhci registers ... This gives the SDHCI specific registers a common name and moves them to a separate file for use by other SDHCI like drivers. The SDHCI spec has some 16bit and 8bit registers. The i.MX accesses these as 32bit registers. These register defines now are named after the SDHCI registers they combine into one, for example: SDHCI_HOST_CONTROL__POWER_CONTROL__BLOCK_GAP_CONTROL is the 32bit version of the SDHCI registers HOST_CONTROL, POWER_CONTROL and BLOCK_GAP_CONTROL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	bd43d2f Browse files » ARM: pbl: Always call pbl make ... We always must decend into the pbl build. Otherwise it doesn't get rebuilt if only sourcefiles from the pbl are changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	c7cf773 Browse files » ARM: i.MX53 vincell: Fix lowlevel startup ... This is a i.MX53 board, not i.MX51. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	b6acb2b Browse files » pcm049: clean up ... Remove magic numbers Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 28 May 2013 Sascha Hauer committed on 30 May 2013
	303efd1 Browse files » pcm049: add 1GB RAM support ... Add config to select RAM assembly. The difference is if one or two chip selects are used. This can't be checkt at runtime. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 28 May 2013 Sascha Hauer committed on 30 May 2013
2013-05-28	77bcb1f Browse files » MIPS: rzx50: enable pbl in defconfig ... Also enable the iomem and poweroff commands. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 26 May 2013 Sascha Hauer committed on 28 May 2013
	4144884 Browse files » MIPS: XBurst: enable pbl support ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 26 May 2013 Sascha Hauer committed on 28 May 2013
	de9afb4 Browse files » MIPS: rzx50: add trivial board_pbl_start ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 26 May 2013 Sascha Hauer committed on 28 May 2013
2013-05-27	0d7ac7c Browse files » mtd: call mtd_erase with complete area if possible ... If a device does not have bad blocks loop over the eraseblocks in the driver instead of the core. This allows the mtd_dataflash driver to erase blocks instead of pages to gain more speed during erasing. Also the mtd_dataflash driver modifies the erase_info struct which causes the outer loop in the core to never end. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	ecceaac Browse files » cfi: make hardware device parent of mtd device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	736f711 Browse files » cfi: Add dev * to flash_info and switch to dev_* ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	6d7cd20 Browse files » cfi: remove unused field from struct flash_info ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	3ece590 Browse files » net: fec_imx: default phy address to -1 for dt probe ... To enable automatic probing of the phy. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	24b9ea6 Browse files » cfi_flash: size_ratio should not be 0 ... We will get size = 0 if size_ratio = 0 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 May 2013 Sascha Hauer committed on 27 May 2013
	fbf9d87 Browse files » cfi_flash: add shift option for some cfi memory chips ... Many cfi chips support 16 and 8 bit modes. Most important difference is use of so called "Q15/A-1" pin. In 16bit mode this pin is used for data IO. In 8bit mode, it is an address input which add one more least significant bit (LSB). In this case we should shift all adresses by one: For example 0xaa << 1 = 0x154 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 May 2013 Sascha Hauer committed on 27 May 2013
	734e723 Browse files » ARM: i.MX51: Add aliases for MMC controllers ... To get persistent names for the MMC controllers add aliases to them Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	aac2c84 Browse files » ARM i.MX53: tqma53: fix console entry ... The default baseboard for the tqma53 (MBa53) uses UART2 for debug console. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 27 May 2013 Sascha Hauer committed on 27 May 2013
2013-05-26	44f8ea4 Browse files » ARM: Makefile: Make sure to clean boarddirs ... On ARM the boarddirs are only cleaned due to the regular file pattern search, but are not explicitly cleaned. This makes it impossible to clean files which are not matched by a pattern but have to be explicitly cleaned due to adding them to extra-y. This patch changes the board-/board-y variables to += so that we can use $(board-) to add it to common-. This way the board directories are also cleaned. While touching the board-y variables anyway order them alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 May 2013
2013-05-25	f2669c8 Browse files » ARM: zynq: Add cmd to generate zynq image ... Add a command to generate the zynq image instead of generating it directly. This causes a rebuild exactly when necessary and prints a "ZYNQ-IMG" to the commandline during compilation. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2013
2013-05-25	9545325 Browse files » make: Add barebox_default_env.* to targets ... Otherwise it gets rebuilt everytime. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 May 2013