LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2014-04-04	0a5529d Browse files » Merge branch 'for-next/ppc' Sascha Hauer committed on 4 Apr 2014
	149e9d8 Browse files » Merge branch 'for-next/mtd' Sascha Hauer committed on 4 Apr 2014
	245bc10 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 4 Apr 2014
	a5c3b05 Browse files » Merge branch 'for-next/menutree' Sascha Hauer committed on 4 Apr 2014
	3753efa Browse files » Merge branch 'for-next/imx-phyflex' ... Conflicts: arch/arm/boards/phytec-phyflex-imx6/board.c Sascha Hauer committed on 4 Apr 2014
	4997646 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 4 Apr 2014
	712b555 Browse files » Merge branch 'for-next/davinci' Sascha Hauer committed on 4 Apr 2014
	a5a82ca Browse files » Merge branch 'for-next/boot' Sascha Hauer committed on 4 Apr 2014
	b587c87 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 4 Apr 2014
	74b5a3d Browse files » Merge branch 'for-next/imx-ipu-v3' Sascha Hauer committed on 4 Apr 2014
	1273cc2 Browse files » param: Add dev_add_param_mac ... This adds a convenience function to register a MAC address device parameter. The only current user is converted to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
	v2014.04.0 07fc511 Browse files » Release v2014.04.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
	279fb43 Browse files » ARM: Phytec phyCORE i.MX35: Update defconfig ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
	effb814 Browse files » ARM: i.MX53 QSB: Remove wrong return ... For a version 1.0 board the rest of loco_late_init should be executed to completely configure the board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
	5dcb117 Browse files » mtd: omap gpmc: Turn debug message into dev_dbg ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
2014-04-03	d70c5a3 Browse files » ARM: i.MX6 Sabrelite: Fix ethernet ... The board code does a phy reset. This implicitly requests the phy reset gpio. This gpio is also registered in the devicetree as phy reset gpio, so the fec driver probe can't request the gpio and bails out with -EBUSY. Fix this by freeing the phy reset gpio in the board code. While at it use gpio_request_array for the gpios. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
	10385d7 Browse files » ARM: i.MX6 Phytec phyFLEX: Add Nand update support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
	964966b Browse files » ARM: i.MX6: Add Nand boot bbu handler ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
	93f1811 Browse files » MIPS: qemu-malta: add CBUS UART support ... This patch adds CBUS UART dts support; also it adds the necessary macros for DEBUG_LL. qemu-malta supports three serial interfaces: * two ports are provided by the FDC37M817 Super I/O; this chip is connected via LPC bus to Intel 82371EB (PIIX4E) South Bridge; * the third serial port is provided by the discrete TI 16C550C (CBUS UART); this chip is connected via CBUS directly to the board's GT64120 North Bridge. See Malta User's Manual (MD00048) for details. CBUS UART Instructions for use: 1. Enable CONFIG_CONSOLE_ACTIVATE_ALL in .config (or disable uart0 in dts) and compile barebox; 2. run qemu: qemu-system-mips -nographic -nodefaults \ -monitor null -M malta -m 256 \ -serial null -serial null -serial stdio \ -bios barebox-flash-image Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 2 Apr 2014 Sascha Hauer committed on 3 Apr 2014
	3e445eb Browse files » ppc: P2020RDB: add environment partition support ... Add an environment partition and support commands so that the system configuration can be permanent. Signed-off-by: Renaud Barbier <renaud.barbier@ge.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Renaud Barbier authored on 2 Apr 2014 Sascha Hauer committed on 3 Apr 2014
2014-04-02	8d5f1bd Browse files » drivers: treewide: Kill empty remove() implementations ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 22 Mar 2014 Sascha Hauer committed on 2 Apr 2014
2014-03-31	709a2e7 Browse files » ARM: Panda: Fix board selection in panda defconfig files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Mar 2014
	33987e9 Browse files » netconsole: bail out when no connection is opened ... When no connection is opened we should not call into the networking stack. Otherwise it can happen that we delay further execution until the network stack detected a link (or timed out bringing the link up). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Mar 2014
	e2fa0cc Browse files » of: Add support for "stdout-path" property ... ePAPR 1.1 specifies the "stdout-path" property, but barebox currently only handles the "linux,stdout-path" property. Add parsing for the new property name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Mar 2014
	0d82393 Browse files » ARM: at91: add sama5d36 SoC support ... SAMA5D36 SoC is a sub type of SAMA5D3 which has two Ethernets Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 28 Mar 2014 Sascha Hauer committed on 31 Mar 2014
	b51cba9 Browse files » MIPS: rzx50: use short form for serial1 reference ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 28 Mar 2014 Sascha Hauer committed on 31 Mar 2014
2014-03-29	d9173ef Browse files » ARM: update imx_v7_defconfig ... - Enable loadenv command - Enable mtd/NAND/UBI/UBIFS support - Enable IPUv3 support - Enable splash support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	47bab7b Browse files » video: i.MX IPUv3: Add hdmi support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	7f72004 Browse files » video: i.MX IPUv3: Add lvds bridge support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	e5af227 Browse files » video: Add i.MX IPUv3 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014