pinctrl: tegra: add Tegra124 support ...

We can reuse the Tegra30 pinctrl driver, as the bit
layout is the same. Just add the pin and drivegroups
and some compile-time magic to avoid bloat.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: tegra30: introduce drvdata ...

Access pin and drivegroups through a drvdata pointer.
This allows to insert other groups for SoCs with a
similar bit layout easily.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add Tegra124 Kconfig symbol ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add architectural timer init ...

If the bootloader doesn't init the architectural timer
on Cortex A15 Linux falls over when trying to boot.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: setup L2 cache on Tegra124 ...

Set SRAM latency to 3 clock cycles.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: hardcode entry address for main cluster ...

I don't know why get_runtime_offset fails on T124 yet,
but this is a safe workaround, with the nice side-effect
of fixing second stage barebox loading.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: apply cluster switch logic to all SoCs >=T30 ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add Tegra124 PLL_X rate setup ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: change cpu internal reset layout for Tegra124 ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: fix MESLECT clock enable ...

Don't disable clk to unrelated devices in the process.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: power up additional partitions on Tegra124 ...

Those 3 are needed to power CPU0 from the CPUG cluster.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: disable IDDQ for PLL_X on Tegra124 ...

This is an additional power down control.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add Tegra124 and AS3722 PMIC to lowlevel-dvc ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: recognize Tegra124 in common initcalls ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: recognize Tegra124 in maincomplex startup ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: lowlevel: fix ODMdata fetch on Tegra124 ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: add Tegra124 id to lowlevel functions ...

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: lowlevel: setup an early stack ...

Even the lowlevel functions are growing to a
size where having a stack seem beneficial.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tegra: pmc: add command to get into RCM ...

In RCM aka recovery mode the BootROM waits for a
usbloader to take over control. On most boards this
is triggered by holding a physical switch which may
be inconvinient at times. Add a command to switch
into RCM from software.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/uemd'

Merge branch 'for-next/tegra'

Merge branch 'for-next/samsung' ...

Conflicts:
	arch/arm/configs/friendlyarm_mini2440_defconfig

Merge branch 'for-next/openrisc'

Merge branch 'for-next/omap' ...

Conflicts:
	arch/arm/configs/am335x_beaglebone_defconfig
	arch/arm/configs/am335x_defconfig

Merge branch 'for-next/net-of-phy'

Merge branch 'for-next/net' ...

Conflicts:
	drivers/net/dm9k.c

Merge branch 'for-next/misc' ...

Conflicts:
	commands/devinfo.c

Merge branch 'for-next/mips' ...

Conflicts:
	arch/mips/configs/dlink-dir-320_defconfig

Merge branch 'for-next/imx' ...

Conflicts:
	arch/arm/configs/tx25stk5_defconfig