LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2014-09-30	6ae9a40 Browse files » startup: Don't print multiple lines with pr_info ... Print the banner with pr_info, but the empty lines before and after it with printf. This makes the banner show up in the log show up properly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
	8af0569 Browse files » clock: make get_time_ns() safe to be called without clocksource ... make it possible to call get_time_ns() before the clocksource has been registered. Just return 0 in this case which is still better than crashing the system. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
	96cae61 Browse files » clock: Add a variable with the first timestamp after startup ... For measuring the startup time it's useful to save the first timestamp after the clocksource has been registered. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
2014-09-26	874d371 Browse files » ARM: am335x_defconfig: Enable USB support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	f59f20b Browse files » Documentation: USB: Add description for OTG device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	bd27156 Browse files » ARM: dts: Update am335x-bone-common.dtsi ... Update from current upstream dtsi. This enables the USB control module. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	6850ccf Browse files » USB: MUSB: Add barebox specific changes ... This changes the MUSB support from the original Kernel state to be usable with barebox. Tested on a custom board and the Beaglebone Black. The host port on the Beaglebone works, the OTG port works in device mode, but not yet in host mode. Based on the initial MUSB port from Rolf Evers Fischer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	12aeca8 Browse files » USB: Add MUSB driver from Linux ... This adds the necessary files from the MUSB driver directly from Linux 3.17-rc5. No changes to the original files have been made so far. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	e1b1d0f Browse files » ARM: AM33xx: Enable USB and USB phy clocks ... These are necessary for USB support. To make sure they are actually enabled when a USB capable barebox is started call the clock enable function during startup also for the full barebox, not only the MLO. Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@delphi.com> Rolf Evers-Fischer authored on 5 May 2014 Sascha Hauer committed on 26 Sep 2014
	98cbf26 Browse files » USB: gadget: allow multiple udc drivers ... Since the MUSB driver will have it's own directory the Kconfig entries won't be in drivers/usb/gadget/Kconfig. This is incompatible with the current 'choice' approach for udc drivers. The udc drivers do not implement the global usb_gadget_poll() anymore, so we can drop the choice and allow multiple gadget drivers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	18d588d Browse files » USB: gadget: put poller into core ... Instead of letting each driver implement usb_gadget_poll directly implement this function in the core which then calls into the drivers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	0a2070b Browse files » ARM: AM33xx: Add AFI GF board support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	458fb8e Browse files » ARM: AM33xx SPI MLO update handler: detect non CH images ... The AM3xxx can boot images containing a Configuration Header (generated with omap_signGP) or images with GP Header (simple size/address information in front of raw image). Update the SPI NOR barebox update handler to detect the GP Header images. These have 0x65726162 ('bare') at the offset header[10]. Also automatically swap the endianess for non swapped images so that the regular non swapped images can also be flashed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	ad428bc Browse files » scripts: mk-am3xxx-spi-image: fix wrong assumptions about SPI images ... We assumed that there is a special image format for SPI. This is not the case. The AM33xx can boot either images generated with omap_signGP or raw images which only have the image size and load address in front of the image. Whether these images are booted from SPI or another boot medium doesn't matter. The only special thing about SPI is that the image is in big endian format. - renames mk-am3xxx-spi-image.c to mk-omap-image.c as the image format is not only supported by AM3xxx but also by the OMAP SoCs - removes the option to specify the SoC - introduces -s to build a big endian image - detects if an image already is an image generated with omap_signGP So the behaviour is like this: raw image -> mk-omap-image -> prepend size/address -> image for SD/MMC raw image -> mk-omap-image -s -> prepend size/address, big endian swap -> image for SPI CH image -> mk-omap-image -> nothing, input == output CH image -> mk-omap-image -s -> big endian swap -> image for SPI Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	01beb0d Browse files » USB: add usb phy header file ... Mostly taken from the Linux Kernel to ease porting phy handling code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
2014-09-25	b1536a3 Browse files » USB: gadget: dfu: Add max_speed to dfu_driver ... The MUSB driver checks for this field. If it doesn't contain something useful the driver bails out. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2014
	bab5030 Browse files » USB: gadget: fastboot: Add missing include ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2014
	8b8ffec Browse files » imx35-regs: add UART2 to CCM defines ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	690e392 Browse files » imx-image: handle i.MX35 special case ... From the i.MX35 user manual : Since MLC NAND Flash devices do not guarantee error-free boot blocks, the i.MX35 boot code requires that the first 4 Kbytes of boot code be duplicated in a subsequent block to serve as a second copy option. Actually imx-image puts the image at 4k but it seems that the i.MX35 bootrom copies only from 8k as it expects that there is a copy of the first 0-4k in 4k-8k (and is supposed to use this copy if there is an ECC error in the first 4k) as we can see in the following lines : barebox@Eukrea CPUIMX35:/ md -s /dev/nand0 0x0 00000000: ea0003fe eafffffe eafffffe eafffffe ................ 00000010: eafffffe eafffffe eafffffe eafffffe ................ 00000020: 65726162 00786f62 00000000 00000000 barebox......... =-> header is @ 0 in flash barebox@Eukrea CPUIMX35:/ md -s /dev/nand0 0x1000 00001000: 56341200 00000000 0001eda1 00000000 ..4V............ 00001010: 00000000 00000000 00000000 00000000 ................ =-> so we have data @ 0x1000 in flash barebox@Eukrea CPUIMX35:/ md 0x87f00000 87f00000: 00000000 00000000 00000000 00000000 ................ 87f00010: 00000000 00000000 00000000 00000000 ................ =-> but we don't find this data in RAM barebox@Eukrea CPUIMX35:/ md -s /dev/nand0 0x2000 00002000: ea000012 eafffffe eafffffe eafffffe ................ 00002010: eafffffe eafffffe eafffffe eafffffe ................ 00002020: 65726162 00786f62 00000000 00034272 barebox.....rB.. =-> so we have the image @ 0x2000 in flash barebox@Eukrea CPUIMX35:/ md 0x87f01000 87f01000: ea000871 eafffffe eafffffe eafffffe q............... 87f01010: eafffffe eafffffe eafffffe eafffffe ................ 87f01020: 65726162 00786f62 87f02000 0003b520 barebox.. .. ... =-> and we find it in RAM Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	25bffd8 Browse files » of: fdt: fix typo in header ... Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphaël Poggi authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	791ff49 Browse files » I2C: at91: fix the method for interrupt ... As the i2c-at91 driver won't work in the interrupt mode, so need to poll the interrupts. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	a0ca2c1 Browse files » i2c: at91: add support of device tree ... Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphaël Poggi authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	ccc282f Browse files » i2c: at91: add at91sam9x5 config ... Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphaël Poggi authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	d78e805 Browse files » i2c: at91: fix coding style issue ... Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphaël Poggi authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
	9d50b34 Browse files » read_file_2: Fix return value ... Set return value correct in error case. This prevents barebox from crashing in some conditions. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 24 Sep 2014 Sascha Hauer committed on 25 Sep 2014
2014-09-24	4c7d79e Browse files » ARM: at91: add sama5d4ek board support ... Add Atmel sama5d4ek board support, which include following features: - NAND flash support - SPI flash support - MMC card support (MCI1) - LCD display support (with QT1070) - Ethernet support Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 23 Sep 2014 Sascha Hauer committed on 24 Sep 2014
	06a0773 Browse files » ARM: at91: add sama5d4 soc support #2 ... Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 23 Sep 2014 Sascha Hauer committed on 24 Sep 2014
	584ee42 Browse files » ARM: at91: add sama5d4 soc support #1 ... Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 23 Sep 2014 Sascha Hauer committed on 24 Sep 2014
	739c91e Browse files » net: macb: enable GEM with only FE feature ... If the GEM is used, however only FE featuren enabled, then it can not support FBLDO configured as 16, and no RGMII/GMII configuratin bit. So, in order to support GEM only with FE feature enabled, we do: - using default value for FBLDO. - using same bit for RMII/MII configuration as GEM for RGMII/GMII. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 23 Sep 2014 Sascha Hauer committed on 24 Sep 2014
	9f0133d Browse files » Subject: [PATCH] cfi: print size in human readable format ... The CFI size is now printed in a human readable format. It also adds "0x" prefix to the printed address. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 23 Sep 2014 Sascha Hauer committed on 24 Sep 2014