LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2010-02-12	c5b99bc Browse files » edb93xx: Fix SDRAM initialization ... Before programming the SDRAM mode registers, mode register update mode must be selected by setting the MRS bit and clearing INIT in GlConfig Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 10 Feb 2010 Sascha Hauer committed on 12 Feb 2010
2010-02-08	8676736 Browse files » EP93xx: Fix system controller register definitions ... EP93xx: The system controller register definition doesn't take into account a 4 byte gap between ChipId and SysCfg, in consequence all accesses to syscon registers ahead of ChipId fail. Fix this by inserting a filler field Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 6 Feb 2010 Sascha Hauer committed on 8 Feb 2010
	63c194a Browse files » edb93xx: Avoid stack usage in early_udelay() ... edb93xx: The purpose of early_udelay() is to provide delay functionality in the early board setup, when the stack isn't set up yet. With some compiler versions the current implementation makes use of the stack and ends up crashing. Fix this by removing an explicit division from early_udelay() Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 6 Feb 2010 Sascha Hauer committed on 8 Feb 2010
	796bb21 Browse files » edb93xx: Enable UART1 ... edb93xx: according to the datasheet UART1 needs to be enabled explicitly Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 6 Feb 2010 Sascha Hauer committed on 8 Feb 2010
	e6b8bdc Browse files » cfi_flash: move include/cfi_flash.c next to driver ... This file has no useful things for others than the driver, so move it next to the driver and remove the corresponding include from other files. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	582da05 Browse files » cfi_flash: remove old driver and switch to new one ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	8b82899 Browse files » cfi_flash_new: make code more readable, return is not a function ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	0890662 Browse files » cfi_flash_new: generate flash erase dots in common function ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	146ba46 Browse files » cfi_flash_new: Safe indention level by bailing out earlier in error case ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	4e459d9 Browse files » cfi_flash_new: Fix Intel chips ... There was some mixup when to to a full status check and when to do a status check only. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
2010-02-04	0c11685 Browse files » remove outdated MAINTAINERS file ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Feb 2010
2010-02-03	e1e9fc4 Browse files » ep93xx eth driver: dump_xxx() cleanup ... ep93xx eth driver dump_xxx() functions: Use %p to print pointer values, remove unnecessary parentheses and declare as static Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 2 Feb 2010 Sascha Hauer committed on 3 Feb 2010
2010-02-03	7f9bde6 Browse files » ep93xx eth driver: Remove unnecessary parentheses in constant definitions ... ep93xx eth driver: Remove unnecessary parentheses in definition of the constants MII_ADDRESS_MAX and MII_REGISTER_MAX Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 2 Feb 2010 Sascha Hauer committed on 3 Feb 2010
2010-02-02	e1cd82c Browse files » ep93xx eth driver: Reorder functions to eliminate need for prototypes ... ep93xx eth driver: Define ep93xx_eth_send_packet() and ep93xx_eth_rcv_packet() before ep93xx_eth_probe(), and eliminate their prototype declarations Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 1 Feb 2010 Sascha Hauer committed on 2 Feb 2010
2010-02-02	0e46c26 Browse files » ep93xx eth driver: Fix dump_xxx_queue() parameter list ... ep93xx eth driver: Add missing parameter to dump_rx_status_queue(), dump_tx_descriptor_queue() and dump_tx_status_queue() Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 1 Feb 2010 Sascha Hauer committed on 2 Feb 2010
2010-02-01	6cbf70a Browse files » Merge branch 'pu' Sascha Hauer committed on 1 Feb 2010
	7d3da14 Browse files » i.MX: select armv6 for i.MX31/35 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	e304879 Browse files » add armv6 support to the konfig system ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	42f4ca1 Browse files » put only once used function inline ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	8f0d0f2 Browse files » replace ET_DEBUG with pr_debug ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	b407cda Browse files » pcm043: initialize cpufreq to 532MHz ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	922bb41 Browse files » remove typedef cmd_tbl_t and replace it with struct command ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	88351d2 Browse files » Move tftp/nfs specific code to net/* ... This adds a few bytes of binary space but is done to put the code where it belongs to. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	085e30b Browse files » remove unused file common/flash.c ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	426de44 Browse files » remove unused NETCONSOLE stuff ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	3f1bf1f Browse files » Use cache functions from kernel ... These cache functions have been extracted from arch/arm/boot/compressed/head.S. The old code only worked properly on ARMv4. Tested on ARMv4, ARMv5, ARMv6 hardware. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	e4ee34a Browse files » i.MX35: Fix pad control bit positions ... Using these macros simplify the configuration for special GPIO usage. But they should use correct bit positions for usage in the IOMUX_PAD() macro. Note: These are the bit positions of the i.MX35 CPU. Not checked for the other i.MX3x CPUs. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 29 Jan 2010 Sascha Hauer committed on 1 Feb 2010
	1e65863 Browse files » cfi_flash: fix alignment problem ... This patch fixes a alignment problem which may show during this scenario: - 32 or 64 attached NOR flash - flashing an image directly from network to the nor flash The involved network driver is "smc9111.c". The data that comes from the network stack and should be written into the flash isn't 32 bit alligned (at least with this network driver). This is probably due to the 48 bit wide ethernet addresses. However the "cfi_flash.c" driver doesn't handle this situation, and accesses the not-alligned address with a 32 bit pointer. This patch fixes the problem by reducing the access width if an alligment problem between source and destination is found. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
	4903636 Browse files » smc91111: fix odering of mac address read from EEPROM ... On my little endian PXA270, the ethernet address is byte swapped: correct ethernet address: 00:50:c2:80:a7:bd broken ethernet address: 50:00:80:c2:bd:a7 The correct value is what the sticker on the baoard and the linux driver says. This patch fixes the problem by reading the ethaddr byte-wise from the eeprom. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
	7ca411e Browse files » Merge branch 'next' Sascha Hauer committed on 1 Feb 2010