LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2011-03-08	a4ad98b Browse files » mci stmp378x: remove ifdefed code ... There is no need to fill the FIFOs before starting a transfer, so remove corresponding code which is commented out anyway. Additionally this fixes a compiler warning with gcc4.5 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Jürgen Beisert <jbe@pengutronix.de> Sascha Hauer committed on 8 Mar 2011
2011-03-03	9e8dd8f Browse files » ARM tx28: add a bigger delay in display enable ... To prevent turning on the display before the signals are stable. Also, put the LCD_CS pin in the same mode as the kernel does to prevent flickering. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	c28dbd8 Browse files » add eukrea_cpuimx51 board ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	d66c359 Browse files » iomux-mx51: add more pins definitions ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	ae45bc2 Browse files » eukrea_cpuimx35: update defconfig ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	483beac Browse files » eukrea_cpuimx35: use OTG workaround only when gadget is selected ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	08684b5 Browse files » eukrea_cpuimx35: switch to default env ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 25 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	5fb8333 Browse files » ARM i.MX: cleanup boot modes ... The i.MX Processors support two different boot modes, the internal boot mode and the external boot mode. Traditionally the external NAND boot mode is handled in drivers/mtd/nand and the internal boot mode is handled in arch/arm/mach-imx. This patch consolidates the handling of both boot modes in arch/arm/mach-imx so that the user does not have to look in the mtd kconfig section for booting from NAND. Also, selecting between internal and external boot mode now is a clear choice. The external NAND boot mode has been independent of the mtd nand driver, but as the code was contained in the NAND driver it was not possible to support booting from NAND without a mtd nand driver. This is changed with this patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	fd5a992 Browse files » net: use dev_* for printing network related stuff ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	a0c1644 Browse files » dm9000: read the mac address from the register if none are specified ... as barebox can be run as a second stage the first stage may have init it before so re-used it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 23 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	065c2b4 Browse files » ARM i.MX35 3stack: Switch to default env ... Also, enable nand driver and external NAND boot support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	1f16755 Browse files » Fix end of expression char (some lines forgotten in v1) ... Its not a bug fix, just a clean up. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 17 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	98894a8 Browse files » ARM tx25: Add defconfig ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	9b9e670 Browse files » initial karo tx25 board support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	af7f5e1 Browse files » ARM i.MX esdctl: Add some missing bitfields ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	4f72931 Browse files » Fix end of expression char ... Its not a bug fix, just a clean up. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 17 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	01bad70 Browse files » mini2440: Use generic environment ... Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	b2afcf9 Browse files » mini2440: Remove some A9M2440 platform leftovers ... Also adapt the config file to the default environment. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	f7d49a3 Browse files » mini2440: Add booting from NAND support ... With this patch barebox can now be booted from RAM, NOR and NAND on the mini2440 platform. 'CONFIG_S3C24XX_NAND_BOOT' must still be 'y' to be able to boot from NAND. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	955f137 Browse files » mini2440: Use a flash based BBT as the kernel also does ... The default configuration of the mini2440 in the current 2.6.37 kernel uses a flash based BBT. So, the barebox for the mini2440 must also use one, to be in sync with the kernel about bad blocks in the flash. Due to the used OOB layout, the generic BBT description coming with the framework can be used. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	5aa7b6a Browse files » mini2440: Make it able to save a runtime environment ... Without this modification saving a modified environment ends with: mini2440:/ saveenv saving environment could not open /dev/env0: Read-only file system Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	12ceaff Browse files » mini2440: Add MCI support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	4a10717 Browse files » mini2440: Add GPIO settings ... This is required in order to enable booting from NAND, when there is no other first level bootlader. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	1c21bb3 Browse files » mini2440: Add SDRAM size autodetection ... If the SDRAM type will change in the future, only the 'config.h' must be adapted to the new settings. The real size will be read back from this setting. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	018fdf0 Browse files » mini2440: Configure debug UART pins very early ... This is required in order to enable booting from NAND and to avoid any visible garbage on the screen until the pins are really set. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	29cfc72 Browse files » mini2440: Add SDRAM config settings ... This is required in order to enable booting from NAND and using the generic S3C2440 setup routines. Two types of SDRAM devices are known to be shipped by FriendlyARM. This config should work on both of them. But it is really tested only for the HY57V561620 type. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	2fbca61 Browse files » mini2440: Add PLL settings ... This is required in order to enable booting from NAND and using the generic S3C2440 setup routines. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	fb14c86 Browse files » mini2440: Add some useful documentation ... Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	8c9b6ae Browse files » mini2440: Fix a runtime warning when '.id=0' is used ... Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	70bacdb Browse files » mini2440: Be a little be pedantic with the include file order ... Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011