LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2011-07-06	v2011.07.0 6d00046 Browse files » Release v2011.07.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Jul 2011
2011-07-05	85caaf5 Browse files » password: fix command support as module ... add missing EXPORT_SYMBOL for nan static function Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 5 Jul 2011 Sascha Hauer committed on 5 Jul 2011
	b4c16a1 Browse files » menu: fix command management module support ... it's part of the command and can not be compiled as an other module Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 5 Jul 2011 Sascha Hauer committed on 5 Jul 2011
	78b77a3 Browse files » menu: fix command support as module ... add missing EXPORT_SYMBOL for nan static function Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 5 Jul 2011 Sascha Hauer committed on 5 Jul 2011
	dee1f82 Browse files » twl4030: fix typo on EXPORT_SYMBOL twl4030_reg_read and twl4030_reg_write ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 5 Jul 2011 Sascha Hauer committed on 5 Jul 2011
	26daaaa Browse files » MCI imx-esdhc: Fix cache flush/inval for multi block support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Jul 2011
2011-06-20	fa8aa17 Browse files » PANDA: remove CONFIG_FS_RAMFS and CONFIG_FS_DEVFS ... MLO is to big (>40000) to save Space disable CONFIG_FS_RAMFS and CONFIG_FS_DEVFS in defconfig Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 20 Jun 2011 Sascha Hauer committed on 20 Jun 2011
2011-06-16	b4294eb Browse files » Disable emitting mul instructions by gcc ... If we are using barebox on a NiosII/e variant, the mul instruction is not supported and causes an exception. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 13 Jun 2011 Sascha Hauer committed on 16 Jun 2011
2011-06-10	42207a9 Browse files » Improved gpmc_nand driver to show the current eccmode. ... Now a 'devinfo gpmc_nand0' shows the current used eccmode instead of <NULL>. The function omap_gpmc_eccmode is now called by dev_set_param. Signed-off-by: Juergen Kilb <J.Kilb@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Kilb authored on 9 Jun 2011 Sascha Hauer committed on 10 Jun 2011
2011-06-10	af2649b Browse files » Check return values of erase and tftp/cp ... The _update script does not check the return value of erasing a partiton or flashing the image to the device. Added this check to get a evaluable return value from the update script. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gamez authored on 9 Jun 2011 Sascha Hauer committed on 10 Jun 2011
2011-06-06	6e27bfb Browse files » Merge branch 'next' Sascha Hauer committed on 6 Jun 2011
2011-06-06	v2011.06.0 b65e45e Browse files » Release v2011.06.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Jun 2011
2011-06-01	ede81aa Browse files » scripts/getenv: delete backup files from enviroment directory ... Also add the '--no-run-if-empty' option to xargs to avoid an error message when no files/folders were found. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 1 Jun 2011 Sascha Hauer committed on 1 Jun 2011
	59f0647 Browse files » pr_warn() must be pr_warning() ... Fix the warning/error: drivers/mci/mci-core.c: In function 'mci_card_probe': drivers/mci/mci-core.c:1195: warning: implicit declaration of function 'pr_warn' ... drivers/built-in.o: In function `mci_card_probe': mc13892.c:(.text.mci_card_probe+0x68): undefined reference to `pr_warn' Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Dirk Behme authored on 31 May 2011 Sascha Hauer committed on 1 Jun 2011
	d1c02cf Browse files » mci-core: add missing newline in debug message ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 31 May 2011 Sascha Hauer committed on 1 Jun 2011
2011-05-31	cbf46b2 Browse files » at91: Support for at91rm9200: core chip & board support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 8 May 2011 Sascha Hauer committed on 31 May 2011
2011-05-26	cbe4574 Browse files » Revert "fix printf warnings" ... While getting rid of all the format(barebox_printf) warnings was nice, it caused the printf calls in arch/sandbox/os/common.c to get directed to the barebox versions rather than the libc ones causing a crash: E.G. before this revert: nm -a barebox\|grep -w printf 0000000000404fa3 T print And after: nm -a barebox\|grep -w printf U printf@@GLIBC_2.2.5 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> This reverts commit `6b082cf`. Sascha Hauer committed on 26 May 2011
2011-05-25	46e72ec Browse files » Always initialize oob_poi before writing OOB data ... The following patch came across the mtd mailing list today. I thinks its also valid for barebox (it handles a special corner case, but maybe it can hit us, too): In nand_do_write_ops() code it is possible for a caller to provide ops.oobbuf populated and ops.mode == MTD_OOB_AUTO, which currently means that the chip->oob_poi buffer isn't initialised to all 0xFF. The nand_fill_oob() method then carries out the task of copying the provided OOB data to oob_poi, but with MTD_OOB_AUTO it skips areas marked as unavailable by the layout struct, including the bad block marker bytes. An example of this causing issues is when the last OOB data read was from the start of a bad block where the markers are not 0xFF, and the caller wishes to write new OOB data at the beginning of another block. In this scenario the caller would provide OOB data, but nand_fill_oob() would skip the bad block marker bytes in oob_poi before copying the OOB data provided by the caller. This means that when the OOB data is written back to NAND, the block is inadvertently marked as bad without the caller knowing. This has been witnessed when using YAFFS2 where tags are stored in the OOB. This patch changes the code so that oob_poi is always initialised to 0xFF to make sure no left over data is inadvertently written back to OOB data. The comment above is for the linux kernel, but the same is valid for barebox and CPUs writing the OOB date controlled in software (like the Samsung S3C2440 does). Signed-off-by: Adam Thomson <adam.thomson@alcatel-lucent.com> Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 May 2011 Sascha Hauer committed on 25 May 2011
2011-05-23	2fac6eb Browse files » fix genenv when using svn based enviroment directory ... Hi When setting the default env of barebox to a svn directory the build stops with questions on removal and the barebox env is polluted with svn files. The patch below fixes that. Tested with 2011.03.1. Newer versions don't boot anymore on my pcm043 :-(. Signed-off-by: Tim Sander <tim.sander@hbm.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tim Sander authored on 20 May 2011 Sascha Hauer committed on 23 May 2011
2011-05-19	1dec194 Browse files » Enable display for MINI2440 board. ... Also add display modes for usual MINI2440 displays. Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 18 May 2011 Sascha Hauer committed on 19 May 2011
	2d88cc4 Browse files » Add support for Samsung S3C24x0 framebuffer. ... Heavily based on original Juergen Beisert's code. Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 18 May 2011 Sascha Hauer committed on 19 May 2011
	373de3c Browse files » commands: add md5/sha1/sha256sum commands using the digest api ... The interface emulates the Linux commands, except that you can specify a sub area - E.G.: barebox:/ md5sum /dev/fd0 2M+1M /env/config /env/bin/boot 10+2 61c4c0180b044191d28f27545f43562f /dev/fd0 0x00200000 ... 0x00300000 908b84bcbadd2f263583a65ff31d1cad /env/config 0x00000000 ... 0x000003a7 f23bd15825cc5006cf5f9fd486d82d2d /env/bin/boot 0x0000000a ... 0x0000000c Adds around 1400 bytes (+ size of digest code) with everything enabled. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Korsgaard authored on 18 May 2011 Sascha Hauer committed on 19 May 2011
2011-05-18	7f72417 Browse files » usb: make locally used functions static ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2011
2011-05-18	fa9d86d Browse files » usb ehci: fix wrong argument order for memset ... Also, make locally used function ehci_submit_root static. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2011
2011-05-17	c2bd07f Browse files » sandbox: allow lseek on host files ... Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Peter Korsgaard authored on 17 May 2011 Sascha Hauer committed on 17 May 2011
2011-05-16	943bf72 Browse files » fix console fifo (and loadb/loady commands) ... This patch fixes loadb and loady commands. tstc() should return true if console_input_buffer is not empty. Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 13 May 2011 Sascha Hauer committed on 16 May 2011
	de5b1a8 Browse files » Fix dma mapping end address ... The flush_dcache_range function takes an absolute end address so we have to add start address to the second parameter. Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 15 May 2011 Sascha Hauer committed on 16 May 2011
	88210b2 Browse files » Fix compiler warning ... Fix incompatible pointer type warning. Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 15 May 2011 Sascha Hauer committed on 16 May 2011
	b76f533 Browse files » Change system frequency in generic board ... In order to match the example I'll provide on my website, set the system frequency to 100MHz in the generic board nios_sopc.h Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 15 May 2011 Sascha Hauer committed on 16 May 2011
	e0a13e2 Browse files » Fix typo in generic.c ... The device init function has the name of one of my board (comBoard). This patch fix the name of the function to generic_device_init. Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 15 May 2011 Sascha Hauer committed on 16 May 2011