Release v2012.07.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ehci: Fix resource size ...

We now have a resource size for the ehci hccr register space. This
was assumed to be 0x40 in size. On OMAP though it is only 0x10 and
then the hccr resource conflicts with the hcor resource which results
in a non working ehci port on beagle and panda boards. This patch
adds a nonintrusive workaround, it limits the hccr resource to 0x10,
which then also works on OMAP.

Later we should drop the multiple resources for the ehci port and
make the resource as specified in the datasheets.

This is broken since:

commit 08845e4
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date:   Wed May 23 12:54:24 2012 +0200

    usb ehci: Add resource sizes

    add_usb_ehci_device registers resources with size 0. Fix this.

    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: uncompress: fix description ...

Command "uncompress" can handle not only with LZO-format, so we just
changed description for command.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Unused files removed ...

Files "modules.builtin" probably have been copied from kernel tree.
This files not used by barebox and can be removed safely.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/base: bail out if request_iomem_region fails ...

When request_iomem_region fails we have to bail out instead of
dereferencing res->start.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/sandbox-fixes'

print out resource_size_t correctly ...

resource_size_t can be 32bit or 64bit depending on the architecture.
Add a define for it to be able to printf a resource_size_t correctly

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

x86 linux16 command: Add missing include ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: fix 64bit build ...

On x86_64 we need CONFIG_PHYS_ADDR_T_64BIT to make the resource sizes
64bit. The kernel has this as a Kconfig variable, but on barebox sandbox
will build with whatever compiler we find, so we can't put it into Kconfig.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs tftp: Fix short file transfers ...

With files smaller than the tftp block size the whole transfer is done
in tftp_do_open already. In this case we are in STATE_DONE, but there
is no error. Set priv->err to 0 and check for it to be able to transfer
small files.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: fix build due to redefined phys_size_t ...

We already have a phys_size_t since:

commit 2f05b69
Author: Renaud Barbier <renaud.barbier@ge.com>
Date:   Fri May 11 11:58:13 2012 +0100

    linux/types.h: define phys_size_t

    Add this definition in preparation for the introduction of the
    mpc85xx support.

    Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix build due to redefinition of this type.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

blackfin: Fix build due to missing __raw_* io accessors ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM qil-a9260: Fix PARTITION_FIXED compilation ...

is now DEVFS_PARTITION_FIXED

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix SHA224 to produce 28 bytes of hash (instead of 32). ...

This fixes a panic in sha224sum.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix a panic in crypto hash calculations due to uninitialized variable. ...

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix sha224sum panic by registering SHA224 hash name. ...

barebox:/ sha224sum
BUG: failure at commands/digest.c:40/do_digest()!

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: limit flash erase and protect to the partiton boundary ...

Passing a too large size or offset to erase could
affect flash outside the partition boundary.
Addresses for SPI flash wrap around, thus giving a
count + offset going past the end of the flash would
wrap around and erase flash at offset 0.

Add the same check for protect.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs: don't erase past the end of the partition ...

"erase /dev/myflash0.mypart 0xf0000+0xf0000" could erase past
the end of the partition.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

m25p80: progressbar tweak ...

Show progressbar even when erasing just a single sector,
otherwise it looks as if erase didn't do anything.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

m25p80: allow erase to be interrupted ...

Check for Ctrl-C before erasing each sector.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

m25p80: prevent endless loop in erase ...

"erase /dev/myflash0 0+1" erased the whole flash,
similar for other value of count if you guessed the
erae block size wrong.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'next'

Release v2012.06.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts/genenv: always pass template to mktemp ...

Passing a template to mktemp is mandatory on OS X.

Signed-off-by: Dirk Hörner <dirker@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts/compiler.h: fixup endianess defines on OS X ...

Signed-off-by: Dirk Hörner <dirker@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

hostcc tools: include "compiler.h", fix included headers ...

When barebox headers get included from HOSTCC tools they should not
include other architecture specific headers as barebox might get
cross-compiled. Instead, the tool itself should include "compiler.h".

Signed-off-by: Dirk Hörner <dirker@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

kbuild: Use Elfnn_Half as replacement for Elfnn_Section ...

The Elfnn_Section is not available on all platforms,
noteworthy are cygwin.
Use the safe replacement _Half.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: XBurst: suitable solution for per-board debug_ll ...

In the commit 40492a0
(MIPS: add common header file for DEBUG_LL via NS16550)
introduced common DEBUG_LL via NS16550 for MIPS
(see file arch/mips/include/debug_ll_ns16550.h).

In the commit 1cbe2b2
(MIPS: XBurst: add Ritmix RZX-50 board support)
the file debug_ll_ns16550.h used in
the file arch/mips/mach-xburst/include/mach/debug_ll.h.

Usage looks like this:

------------------------------------------------
+#ifdef CONFIG_BOARD_RZX50
+#include <mach/debug_ll_jz4755.h>
+#endif
+
+#include <debug_ll_ns16550.h>
------------------------------------------------

So after adding another board (e.g. A320) we will have something like this:

------------------------------------------------
 #ifdef CONFIG_BOARD_RZX50
 #include <mach/debug_ll_jz4755.h>
 #endif

+#ifdef CONFIG_BOARD_A320
+#include <mach/debug_ll_jz4740.h>
+#endif

 #include <debug_ll_ns16550.h>
------------------------------------------------

This approach has disadvantage:
* the files mach/debug_ll_jz4740.h and mach/debug_ll_jz4755.h
(they go to arch/mips/arch-xburst) are __BOARD-SPECIFIC__
(not SOC- or mach-specific!); The file mach-xburst/include/mach/debug_ll.h
is outside board directory, but it contains some board related information.

This commit introduce a more suitable solution.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: make possible board-specific header files ...

This patch makes possible to put a board-specific
header file (e. g. foobar.h) to arch/mips/boards/*/include/board/.

Header file usage:
 #include <board/foobar.h>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb ehci: Add resource sizes ...

add_usb_ehci_device registers resources with size 0. Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>