LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2012-07-30	32eca5b Browse files » ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC ... The S3C64XX SoC has a real 32 bit counter, but almost the same style of registers. It's enough to change the parameters, to get the routines work on this SoC. sha: s5p timer works like s3c64xx, so use #else to cover this. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 28 Jul 2012 Sascha Hauer committed on 30 Jul 2012
	e40b05c Browse files » imx35: mmc clock has 6 bit divider, not 3_3 ... Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Reilly authored on 29 Jul 2012 Sascha Hauer committed on 30 Jul 2012
	63f5709 Browse files » ARM/Samsung: add S3C6410 SoC iomap ... Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 28 Jul 2012 Sascha Hauer committed on 30 Jul 2012
	991e1ca Browse files » decompress_unlzo: define decompress_unlzo as decompress ... so we can use decompress in the decompressor this will simplify multi decompress support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Jul 2012 Sascha Hauer committed on 30 Jul 2012
	7ff4896 Browse files » kbuild: Init all relevant variables used in kbuild files ... import from linux 3.5-rc5 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Jul 2012 Sascha Hauer committed on 30 Jul 2012
2012-07-27	bd6cc52 Browse files » MIPS: add initial exceptions handling ... Checking exception handling: $ make qemu-malta_defconfig $ make ... $ qemu-system-mips -nodefaults -M malta -m 256 \ -nographic -serial stdio -bios ./barebox.bin ... barebox:/ md -l 0x03 Ooops, address error on load or ifetch! EPC = 0xa082783c CP0_STATUS = 0x00000006 CP0_CAUSE = 0x00000410 CP0_CONFIG = 0x80008482 ### ERROR ### Please RESET the board ### Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 25 Jul 2012 Sascha Hauer committed on 27 Jul 2012
2012-07-26	63b3a39 Browse files » defaultenv-2: Add bootargs for booting from disk ... Add support in defaultenv-2 for booting from disk (SD-Card, USB-Stick). Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 25 Jul 2012 Sascha Hauer committed on 26 Jul 2012
2012-07-26	e8bbaca Browse files » i2c: fix printf format specifier ... Use %u instead of %d for an u32 variable Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Jul 2012 Sascha Hauer committed on 26 Jul 2012
2012-07-25	d6a50c9 Browse files » stddev: make it selectable via Kconfig ... enable is by default for simple and hush we do not need to NO_SHELL this allow to save 1KiB Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	14c8c60 Browse files » command: add missing EXPORT_SYMBOL for find_cmd ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	e7abb18 Browse files » version: add missing EXPORT_SYMBOL for version_string ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	8bc0b0a Browse files » complete: add missing EXPORT_SYMBOL for {command, device, empty, command}_var_complete ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	3890f77 Browse files » vsprintf: fix EXPORT_SYMBOL typo on simple_strtoull ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	1fdb1cf Browse files » Samsung/serial: make the clock source configureable ... Instead of taking the value from somewhere, use the selected architecture to select one. This ensures the selected clock source corresponds to the values setup in the clocks-*.c from the mach directory. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	24c110d Browse files » Samsung/serial: unify UCON register settings ... This should work on S3C24XX and S3C64XX SoCs. Tested at runtime on a Mini2440 and Mini6410. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	c5066ad Browse files » Samsung/serial: move the decision about an improved UART into Kconfig ... More or less just cosmetic (removing ifdefs!). Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	4b2dfa8 Browse files » Samsung/serial: there is no need to ifdef the slot table ... The '__maybe_unused' attribute prevents the compiler from warning about an unused variable and the 'static' will remove it entirely if it's not used. This patch is only cosmetic. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	78d124b Browse files » Samsung/serial: there is no need to ifdef these register defines ... Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	abd875d Browse files » Samsung/serial: make the code more readable ... This bit magic is just setting and reading the UART's selected clock source. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	49347e4 Browse files » Samsung/serial: remove more ugly ifdef lines ... More or less just cosmetic. Easier to read, and lets the compiler remove unused code. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	670254b Browse files » ARM/Samsung: follow the name style of the other source files in this directory ... Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	1c74402 Browse files » ARM/Samsung: List only really supported S3C24xx SoCs ... The other SoCs differs in many ways from the currently supported S3C2410 and S3C2440, so remove them. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	0d98114 Browse files » usb: gadget: enable for MXS ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 16 Jul 2012 Sascha Hauer committed on 25 Jul 2012
	babb73d Browse files » UBI: select crc32 support ... UBI needs this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012
	ea0dc13 Browse files » mtd: scan_write_bbt is only needed with mtd write support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012
	f97a4b0 Browse files » I2C i.MX: disable driver for i.MX1 ... Although the driver could work on this hardware, i.MX1 support currently lacks the necessary clocks resulting in linker errors. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012
	0daaf9e Browse files » uimage: select uncompress and crc32 support ... uImage support needs both. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012
	55a618e Browse files » ARM at91: fix typo in define ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012
	bc1932b Browse files » ARM at91: remove const ... Although the spi chipselects should really be const, there is no good way to fix the compiler warning, so remove the const. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012
	2f1d3b4 Browse files » mtd omap: add prefix to omap specific decode_bch function ... So that it does not collide with our generic decode_bch function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Jul 2012