Release v2012.11.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'phy-fixes'

Revert "net fec: connect phy at probe time" ...

While this makes sure that the phy fixups are applied even if
networking is not used on i.MX6, this patch due to latest phy
changes causes the startup of barebox delayed until we have a
link on the i.MX fec. Revert it for now and look for a better
solution later.

This reverts commit 3a17af3.

mci-core: fix debug Capacity cast ...

so we print the correct size

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mx53 loco: enable smsc phy driver ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy: add smsc phy driver support ...

as we to have specific phy init to fix chip issue link detection support

based on linux 3.6

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy: add phy_drivers_register ...

to allow to register an array of drivers

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mx53-loco: fix phy reset ...

the phy reset neet to be done before the fec driver is registered
as we accesst the phy at the fec probe time

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

replace barebox* in .gitignore with individual files ...

This effectively reverts:

| commit f9df22b
| Author: Alexander Shiyan <shc_work@mail.ru>
| Date:   Mon Oct 8 10:35:04 2012 +0400
|
|    Add more generated files to .gitignore

barebox* is not limited to the toplevel directory, so this ignores
all files starting with 'barebox' from which we have several we do
not wish to ignore. Add barebox-flash-image to the ignore list which
seemed to be the motivation for the original patch.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>

ARM pbl: add generated file zbarebox.map to .gitignore ...

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defenv-2 menu: when booting failed wait for key press ...

When booting fails we will be immediately be back into the menu,
so the error message can't be seen. Also, boot in verbose mode
since in interactive mode the last bit of performance is not that
necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mount: add compatibility to old mount command ...

the mount command used to have the syntax 'mount <dev> <type> <mountpoint>'.
This was changed to the more Linux like behaviour which specifies the
type with the -t <type> option. If a newer barebox is run on a device
with an older environment the mount command no longer works. This patch
adds compatibility to the old behaviour.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

iomux-imx35: add missing comma in pad definition ...

The same issue was fixed in the Linux kernel in commit

	66ddfc6 (mx35: add a missing comma in a pad definition)

for 2.6.33-rc7.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

command: return 1 on unknown command ...

hush now prints the error value if a command returns a value < 0,
so do not return -1 (EPERM) when we encounter an unknown command.
Instead, return 1 so that hush is quiet.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9xek: fix mtd partition ...

barebox size is 384KiB
and for the official atmel release we need to rootfs at 8M

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Do not cross 1MiB sections for the devicetree ...

ARM Linux only maps a single 1MiB section for the devicetree. This has
a 1Mib alignment, so we are not allowed to cross such a boundary. Align
the devicetree to the next power of two so that this never happens.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Add a define for the additional devicetree size ...

The fixed devicetree may need more space than the original one.
We used to use 0x8000 here. Add a define for it to have the
space defined at a single place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net usb asix: Add missing line breaks in dev_* messages ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/net-fixes'

net fec: call fec_init at probe time ...

fec_init() initializes some bits important for phy access, so do
this before the mdiobus is registered. This fixes mdiobus support
on i.MX28 boards in RMII mode.

Reported-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

uimage: Fix deleting of temporary file ...

the uImage support may generate a temporary file which ought to be deleted
after usage. Due to the wrong filename this never happened. Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net eth: make edev->init optional ...

edev->init is called at eth_register time unconditionally and is supposed
to initialize the ethernet hardware. Since it's called unconditionally
this could be done by the driver without having an additional hook.
Some drivers need their initialization done earlier since they also register
a mdiobus which does hardware accesses on registration time.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net fec: connect phy at probe time ...

Several i.MX boards (all i.MX6 boards) need to do some adjustments
to phy registers. If barebox itself does not use network, networking
won't work in the kernel if the kernel does not have the fixups. Connect
the phy at probe time so that these tweaks are done during probe so that
the kernel works without phy register tweaks. Also this has the effect
that the phy device is present and introspectable without doing fake
network transfers beforehand.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Check for NULL pointer in of_find_property ...

The console layer calls of_device_is_stdout_path for a new console. When
we are booting without devicetree then of_chosen is NULL which makes barebox
crash. Check for a NULL pointer in of_find_property to prevent this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

misc JTAG: include fixes ...

common.h should come first, other include files implicitely depend
on it. Also, remove unused fs.h and remove commented line.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap spi image: print error to stderr ...

Since the utility outputs the image on stdout we have to print the
error messages to stderr in order to see them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap spi image: relax size constrains ...

The omap spi utility requires the image size to be a multiple of four
bytes. This seems unnecessary, we can just pad with a few bytes to
get the required alignment.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: provide hang() function for the pbl ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of gpio: Build gpio helper only when gpiolib is selected ...

Otherwise the functions needed by the helper won't be available.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd nand i.MX: fix compilation for unsupported SoC ...

Add a default case when all if(nfc_is_*) else if()
return false to prevent a compiler warning.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>