Merge branch 'for-next/dt'

Merge branch 'for-next/console'

Merge branch 'for-next/clps711x'

Merge branch 'for-next/at91'

Merge branch 'for-next/arm-l2x0'

Merge branch 'for-next/ahci'

Release v2013.03.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: always write page when oob is given ...

Since recently we check for the page being written for not being
empty and do not actually write it when it is. This fails for a
freshly created flash bad block table when all blocks are good.
In this case the bbt code will try to write an empty page, but
with the BBT marker in OOB. This page never gets written, so the
BBT code will not find a bad block table during next start up and
writes it again. Fix this by checking if we want to write OOB data,
if we do, then write the page, even if the data is empty.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: fix build for big-endian platform ...

The problem was introduced in

    commit 51885a7
    Author: Sascha Hauer <s.hauer@pengutronix.de>
    Date:   Thu Jun 28 09:56:23 2012 +0200

    Change byte order detection mechanism to kernel style

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver/serial: add driver for the mxs application uart ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver/serial: Kconfig: explicitly state that existing mxs driver is for the debug uart ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: cfa10036: Remove the boot partition and boot from ext ...

Support for ext filesystems has been introduced recently. We can now
boot directly from our rootfs, loading the kernel and device tree
images from /boot.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

highbank: add of fixup ...

depending on the power domain register we need to disable sata or mmc
and update the cpu informations

take from Calxeda U-Boot git

Register the original dtb to /dev/firmware-dtb and the fixed dtb to /dev/dtb

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

highbank: move register value to include/mach ...

so the board can use it

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: add do_fixup_by_compatible with u32 and string version ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: dhcp: fix typo ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

log2: Fix declaration of __roundup_pow_of_two ...

The roundup_pow_of_two function is making use of __roundup_pow_of_two
when the call to __builtin_constant_p fails, which is not implemented in
barebox.

Copied the code from Linux log2.h header.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cfa10036: Update the environment ...

Since we added a new partition in the board, the partitions number of
the boot and rootfs partition have changed as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cfa-10036: Use the second MMC partition to store the environment ...

Since the only storage medium on the cfa-10036 is the MMC card, we need
to have a registered environment partition on it if we want to be able
to modify at runtime.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX pcm043: Use imx_bootsource() to detect bootsource ...

Also, print out where our environment comes from.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX pcm043: Switch to new environment ...

- switch to new environment
- make barebox partitions 512K big
- update defconfig for new env:
  - enable menu support
  - miitool support
  - clk commands
  - oftree support
  - let/dirname/readlink commands
  - enable external nand boot support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/imx-fixes'

ARM: i.MX: Replace numbers with predefined constants in several places ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial/Makefile: drop out of date comments ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

menu: fix remove superfluous newline: change puts() -> printf("%s", ) ...

Fix previous commit:
638f91b "fix compiler warnings: use puts() instead of printf()".

Because puts() function add a newline, use instead printf("%s", ).

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bareboxenv: Return proper exit code on failure. ...

In case environment loading/saving failed, the calling program
should be informed about that by returning a non zero exit code.

Signed-off-by: Christian Kapeller <christian.kapeller@cmotion.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smc911111: fix send and recv return value ...

on error send error code and 0 on success

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

hush: implement $* ...

To get all arguments a script is called with.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM at91 telit-evk-pro3: move config-board out of /env/init ...

This is to complete the work of two recent commits:
- defenv2: move config-board out of /env/init
- defenv2: comment setting default values in /env/config

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defenv2: comment setting default values in /env/config ...

There is no need to set again default values in /env/config
because they are already set in /env/bin/init,
that allows /env/config-board to change those default values
without being overwritten by /env/config.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>