LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2014-05-05	d79618a Browse files » ARM: bootm: be more clever while deciding where to put zImage ... For small systems we would put the zImage at 8MiB after the start of memory, and put the DT a bit after the zImage. When we encounter an image which is bigger than 8MiB uncompressed, the kernel would try to relocate itself and overwrite the DT. Try to be more clever at zImage placement to avoid triggering the kernel relocation. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 5 May 2014
	15db8b7 Browse files » ARM: imx: move malloc area to upper memory bank by default ... If we have two discontinuous memory banks we want to move the malloc area into the upper bank by default to leave as much free space in the lower bank, where we have to place kernel, oftree and initrd. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 5 May 2014
	60a9cd5 Browse files » ARM: phycore-am33xx: remove extra FDT memcpy ... Not needed anymore, as barebox now accepts FDTs outside of it's visible DRAM, as long as it's a valid pointer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 5 May 2014
	739b916 Browse files » ARM: eDM-QMX6: remove extra FDT memcpy ... Not needed anymore, as barebox now accepts FDTs outside of it's visible DRAM, as long as it's a valid pointer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 5 May 2014
	0bc9408 Browse files » ARM: beaglebone: remove extra FDT memcpy ... Not needed anymore, as barebox now accepts FDTs outside of it's visible DRAM, as long as it's a valid pointer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 5 May 2014
	4f381b1 Browse files » ARM: change signature of barebox_arm_entry ... Mostly to make it clear that boarddata needs to be something we can dereference. As this is a pretty invasive change, use the opportunity to make the signature 64bit safe. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 5 May 2014
	0668b9f Browse files » ARM: Rockchip: use upstream dtsi files ... Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Beniamino Galvani authored on 29 Apr 2014 Sascha Hauer committed on 5 May 2014
	7b76317 Browse files » Merge branch 'for-next/tegra' ... Conflicts: arch/arm/dts/tegra20-colibri.dtsi arch/arm/dts/tegra20-paz00.dts arch/arm/dts/tegra20.dtsi drivers/clk/tegra/clk-periph.c Sascha Hauer committed on 5 May 2014
	cdfca5d Browse files » Merge branch 'for-next/rockchip' Sascha Hauer committed on 5 May 2014
	845f765 Browse files » Merge branch 'for-next/regulator' ... Conflicts: commands/Makefile Sascha Hauer committed on 5 May 2014
	9bb7688 Browse files » Merge branch 'for-next/of' Sascha Hauer committed on 5 May 2014
	bf1d71d Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 5 May 2014
	8fb1d4e Browse files » Merge branch 'for-next/mips' ... Conflicts: arch/mips/boards/loongson-ls1b/serial.c Sascha Hauer committed on 5 May 2014
	4626972 Browse files » Merge branch 'for-next/memtest' Sascha Hauer committed on 5 May 2014
	f8327af Browse files » Merge branch 'for-next/ioresource' Sascha Hauer committed on 5 May 2014
	b568687 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 5 May 2014
	80f1589 Browse files » Merge branch 'for-next/ifup' Sascha Hauer committed on 5 May 2014
	2274c6e Browse files » Merge branch 'for-next/env' Sascha Hauer committed on 5 May 2014
	d27b978 Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 5 May 2014
	v2014.05.0 c61ba23 Browse files » Release v2014.05.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 May 2014
	6bef4dd Browse files » dts: update to v3.15-rc3 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 May 2014
	825fca3 Browse files » imx6: ocotp: Add On-Chip OTP registers write support ... FUSEs (OTP registers) can be written via /dev/imx-ocotp character device. For example, writing MAC 12:34:56:78:9A:BC can be performed as > mw -l -d /dev/imx-ocotp 0x8c 0x00001234 > mw -l -d /dev/imx-ocotp 0x88 0x56789ABC and reading as > md -l -s /dev/imx-ocotp 0x88+8 00000088: 56789ABC 00001234 , where 0x88 (0x224) and 0x8C (0x234) are offsets of MAC OTP registers. Notice: FUSEs are PROM, so "0" (unprogrammed) bits can be replaced with "1" (but not vice versa) only once. Also, for MAC there are convinient parameters: > ocotp0.permanent_write_enable=1 > ocotp0.mac_addr=12:34:56:78:9A:BC imx_ocotp 21bc000.ocotp: reloading shadow registers... imx_ocotp 21bc000.ocotp: reloading shadow registers... > echo $ocotp0.mac_addr 12:34:56:78:9A:BC Signed-off-by: Uladzimir Bely <u.bely@sam-solutions.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uladzimir Bely authored on 11 Apr 2014 Sascha Hauer committed on 5 May 2014
	7af9c3a Browse files » net cpsw: fix rx stability under heavy network load ... RX DMA Head Descriptor Pointer can get 0 when there is a lot of traffic, which results in a timeout error. A good way to provoke this error is by sending lots of ARP requests. This patch makes sure that the RX DMA Head Descriptor Pointer is set. The origin driver, from which this is derived, already contains this fix. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
	5dafef6 Browse files » tftp: add timeframe when remote server is retransmitting ... If there's packet loss and the remote server needs to retransmit, there is falsely no timeframe left because TIMEOUT (server wait time) and TFTP_TIMEOUT (abort timer) are the same. This patch increases TFTP_TIMEOUT. See RFC2349 for more info: http://tools.ietf.org/html/rfc2349 Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
	e0afbe3 Browse files » imx:mmdc:Move imx6-reg include to imx6-mmdc header ... Move the imx6-reg.h include to the imx6-mmdc header. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 5 May 2014
2014-04-30	3e571c1 Browse files » imx6: Add support for phyCARD-i.MX6 ... Add support for Phytec phyCARD-i.MX6. - 1GB RAM on two banks - 1GB RAM on one bank - 2GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 30 Apr 2014
	159f1ea Browse files » ARM: boards: Makefile: fix whitespace ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
	a8334c6 Browse files » Fix bug in export 64 bit unsigned environment variable. ... This patch corrects exporting unsigned 64-bit environment variables. I had left out a signed off line before. Signed-off-by: Michael Burkey <mdburkey at gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael D. Burkey authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
2014-04-29	eecac38 Browse files » mtd: nand-mxs: Return bitflips ... The read_page hook shall return the number of bitflips. Implement that. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Apr 2014
2014-04-29	ccc4eac Browse files » RiOTboard: add new board ... this board is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested : - UART2 (console) - eMMC - SDCard - uSDCard - Ethernet - USB Host (through 4 ports hub) - I2C 1/2/3 - 2 LEDs Boot on eMMC and through USB loader are tested. For more informations on this board : http://www.riotboard.org/ Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 24 Apr 2014 Sascha Hauer committed on 29 Apr 2014