LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2015-04-13	a60d04c Browse files » net: mvneta: Fix transmit errors due to dirty txdesc ... Marvell Neta's transmit descriptor (txdesc) is allocated by dma_alloc_coherent() but not zeroed before calling mvneta_send the first time. This can cause spurious transmit errors due to improperly set bits in txdesc's cmd_sts field. Fix initial transmit errors by always writing whole cmd_sts field instead of ORing the bits. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sebastian Hesselbarth authored on 9 Apr 2015 Sascha Hauer committed on 13 Apr 2015
	4cc0a3d Browse files » wdog: imx-wd: Disable watchdog powerdown counter ... Disable the watchdog powerdown counter at start. Otherwise this may trigger a reset or poweroff over the WDOG_B line to a PMIC. This counter is set to 16 seconds after poweron. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Pargmann authored on 9 Apr 2015 Sascha Hauer committed on 13 Apr 2015
	564a609 Browse files » wdog: imx-wd: Introduce ops struct for imx21/imx1 ... Replace the set_timeout function in the device platform data by an ops struct which stores a set_timeout and init function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Markus Pargmann authored on 9 Apr 2015 Sascha Hauer committed on 13 Apr 2015
	da440ab Browse files » pci: make sure to activate devices on the root bus ... Commit b8a1bb1dd215 (pci: defer device registration until after bridge setup) changed the activation order of devices, so that bridges above the devices could be configured properly before activating the devices below. This commit failed to acknowledge that there may be devices located directly on the root bus without any bridge in between and so those devices would never get enabled. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Lucas Stach authored on 3 Apr 2015 Sascha Hauer committed on 13 Apr 2015
2015-04-03	7cb4778 Browse files » imx-image: pad generated image to 4k ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Apr 2015 Sascha Hauer committed on 3 Apr 2015
	4a50ffc Browse files » imx-image: main: make use of round_up instead of open coding it ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Apr 2015 Sascha Hauer committed on 3 Apr 2015
	5e5ced6 Browse files » imx-image: mx35: increase load image size, due to dobule header ... Since commit: 690e39202747 imx-image: handle i.MX35 special case the IVT+DCD header is placed both at 0x0 and 0x1000, this patch reflects this change and increases the load image size accordingly. Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Apr 2015 Sascha Hauer committed on 3 Apr 2015
	8acb4e6 Browse files » imx-image: introduce HEADER_LEN and replace several 0x1000 and 4096 ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Apr 2015 Sascha Hauer committed on 3 Apr 2015
	15034f8 Browse files » imx-image: replace 0x400 by FLASH_HEADER_OFFSET ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Apr 2015 Sascha Hauer committed on 3 Apr 2015
	01e879b Browse files » imx-image: add_header_v2(): replace hardcoded 0x400 by offset parameter ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Apr 2015 Sascha Hauer committed on 3 Apr 2015
	e44c9b0 Browse files » net: ping: return an error exit code when connection fails ... ping command does not always returns 1 as exit code when connection to host fails. In particular it returns the exit code of the previous run. This patch fixes this issue. Signed-off-by: Mirko Damiani <mirko@develer.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Mirko Damiani authored on 16 Mar 2015 Sascha Hauer committed on 3 Apr 2015
	712da93 Browse files » net: Add Intel e1000 driver ... This adds the Intel e1000 driver from U-Boot. The driver looks in parts quite similar to the kernel driver, I don't know whether one is derived from the other or if they both just have the same origin. Many coding style related issues are fixed, the code is simplified in several places. All features of the original driver should still be there, only fiber support is disabled since it's quite unlikely that this is used in barebox. The driver has been tested with the i.MX6 PCIe driver and a I210 e1000 device (0x8086:0x1533) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2015
	134f246 Browse files » commands: dmesg: fi format security warning ... commands/dmesg.c: In function ‘do_dmesg’: commands/dmesg.c:71:3: warning: format not a string literal and no format arguments [-Wformat-security] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 31 Mar 2015 Sascha Hauer committed on 3 Apr 2015
	f61275f Browse files » images: mxs: remove not used PREP_ definitions ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 31 Mar 2015 Sascha Hauer committed on 3 Apr 2015
2015-03-30	394d4ac Browse files » mtd: nand_omap_gpmc: Fix ecc check for bch8 romcode ... The bch8 romcode was only checked and corrected for the first 512 bytes of a 2048 byte page. Set interation counter and eccsizes correct for the different bch types. Tested OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH8_CODE_HW_ROMCODE. Reported-by: Gabor Janak <g.janak@agilion.de> Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 30 Mar 2015 Sascha Hauer committed on 30 Mar 2015
	4ef5f8c Browse files » mtd: nand_omap_gpmc: Remove unused code ... The ecc layout structs are not used anywhere. Signed-off-by: Teresa Gámez <t.gamez@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Teresa Gámez authored on 30 Mar 2015 Sascha Hauer committed on 30 Mar 2015
	6c6f7c0 Browse files » ARM: tegra124: remove serial aliases ... They are upstream now and unfortunately actively break some boards as they are using a different alias numbering in the kernel. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 30 Mar 2015 Sascha Hauer committed on 30 Mar 2015
	7a5a6bb Browse files » duckbill: fix PBL debug prefix ... Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 27 Mar 2015 Sascha Hauer committed on 30 Mar 2015
	5cef8a3 Browse files » ARM/MXS/i.MX28: recognize watchdog reset ... When a watchdog timeout is set in the linux kernel, the FORCE_UPDATE bit is set. Use this to recognize a system reset that was triggered by the watchdog. Since only the wdt part of the kernel driver sets this bit, this is a safe distinguishing feature. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 27 Mar 2015 Sascha Hauer committed on 30 Mar 2015
	238ffb6 Browse files » command: hashsum: Conding style fixup ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 27 Mar 2015 Sascha Hauer committed on 30 Mar 2015
2015-03-27	0d348bc Browse files » arm: crypto: add sha256 assembly support ... linux arm sha256 current $ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin -rw-r--r-- 1 root root 207786 Mar 24 13:23 build/versatilpb/arch/arm/pbl/zbarebox.bin linux arm v4 asm implementation for sha256 $ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin -rw-r--r-- 1 root root 205007 Mar 24 16:47 build/versatilpb/arch/arm/pbl/zbarebox.bin we win 2779 bytes and speed cf code Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	ee1fb15 Browse files » arm: crypto: add sha1 assembly support ... from Linux 3.9 linux generic implementation $ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin -rw-r--r-- 1 root root 210829 Mar 24 13:21 build/versatilpb/arch/arm/pbl/zbarebox.bin linux arm v4 asm implementation $ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin -rw-r--r-- 1 root root 207786 Mar 24 13:23 build/versatilpb/arch/arm/pbl/zbarebox.bin we win 3043 bytes and speed cf code Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	4267de5 Browse files » crypto: sha512: switch to linux implementation ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	2332a21 Browse files » crypto: sha256: switch to linux implementation ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	144e104 Browse files » crypto: sha1: switch to linux implementation ... current implementation $ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin -rw-r--r-- 1 root root 211095 Mar 24 13:21 build/versatilpb/arch/arm/pbl/zbarebox.bin linux generic implementation $ ls -al build/versatilpb/arch/arm/pbl/zbarebox.bin -rw-r--r-- 1 root root 210829 Mar 24 13:21 build/versatilpb/arch/arm/pbl/zbarebox.bin on a compressed lzo barebox we will 266 bytes Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	c3fe3d7 Browse files » crypto: hmac: move register to hmac ... As we will use the best sha algo at runtime Add a new init level crypto_initcall to ensure that all the sha present before hmac Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	ab5b2c3 Browse files » crypto: prepare to allow multiple digest driver ... This will allow to have hw driver or asm optimised driver. Use a priority level to determine which one to use at runtime. The generic one will be 0. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	e10cc0b Browse files » digest: allow algo to specify their length at runtime ... such as RSA as we load a DER key we will detect the key size at runtime and so the algo length. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
	5afec9c Browse files » command: digest/hashsum: set key at command level ... and only set the key when specified Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 25 Mar 2015 Sascha Hauer committed on 27 Mar 2015
2015-03-26	6dc8ef5 Browse files » docs: correct link to microcom repo ... It's not nice to land on a 404 page and having to search for the right location manually. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 25 Mar 2015 Sascha Hauer committed on 26 Mar 2015