Release v2015.09.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: do not ignore data aborts initially ...

arm_ignore_data_abort can be set to nonzero to ignore data aborts. The
default should be not to ignore data aborts. Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx53: vincell: guard board initcall ...

Make sure that the initcall only executes on the expected board.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dhrystone: Fix documentation ...

BAREBOX_CMD_HELP_TEXT may not contain a linebreak.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

completion: fix device parameter completion ...

With device parameter completion the '.' separator between the device
name and the parameter was not handled correctly. For example with
a device named global a completion starting with "g." was completed to
"g.obal.". fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/vpl'

Merge branch 'for-next/vincell'

Merge branch 'for-next/video'

Merge branch 'for-next/spd'

Merge branch 'for-next/ppc'

Merge branch 'for-next/net'

Merge branch 'for-next/misc'

Merge branch 'for-next/logo'

Merge branch 'for-next/imx'

Merge branch 'for-next/fbcon'

Merge branch 'for-next/exitcall'

Merge branch 'for-next/efi'

Merge branch 'for-next/dts'

Merge branch 'for-next/am335x'

mtd: nand_base: replace ifdef with IS_ENABLE ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: Add dhrystone ...

This tool will help to measure the system performance.

Some SoCs haven't the possibility to route their clocks to the output pins.
So you can use dhrystone to get a feedback about the clock speed.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: concat: initialize *retlen ...

In concat_write and concat_read *retlen is only added to, but it's never
initialized. If the caller hasn't initialized retlen doesn't contain
valid values. Fix this by initializing *retlen properly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: cfi-flash: Fix info ...

Since

636d384 mtd: cfi-flash: Add mtd concat support

The devinfo output is broken. dev->priv no longer contains a
struct flash_info * but instead a struct cfi_priv *.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2015.08.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: add davinci watchdog driver ...

This driver is based on the Linux driver (v4.0).

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: fix missing newline in error message ...

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: handle write-protection in the raw backend ...

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PPC/PCM030: provide EEPROM support to read factory settings ...

Above the 0x800 offset the manufacturer provides the board type, a serial
number and the MAC as three simple strings. Extract these strings, provide
their value as global variables and set the MAC into the ethernet unit.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PPC/MPC5200: re-use the IMX I2C master driver for MPC5200 ...

This IP core is shared between many FSL SoCs. The MPC5200 provides this
core as well.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PPC/MPC52xx: unify header file name for clock API ...

In preparation to re-use the i.MX I2C driver for the MPC5200 SoC use
clock.h instead of clocks.h for the clock API.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>