Release v2015.12.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: pxa: pxa2xx use PSPR for resume address ...

Both lubbock and mainstone suspend to RAM were broken by the same
typo. The linux kernel saves the resume address to PSPR, ie. the scratch
pad register, while it was PSSR which was checked in barebox.

Fixing this typo was tested on mainstone where resume from S3 works.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: smc1111: fix ethernet mac setting ...

Even if the setting of the MAC address does work correctly, the function
return an error.

In the former barebox version, this didn't seem to be a problem. In
v2015.11.0 version, the "ifup eth0" command fails because of this, and
as a consequence the network interface doesn't work.

The fix is straightforward.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "memtest: move error handling to end of function" ...

While this simplifies the code as is I got the request to continue on
errors in memtest, which can be better implemented when the messages are
printed inline and not at the end of the function.

This reverts commit 4ff9e28.

mtd: core: initialize *retlen in mtd_write() ...

Some mtd drivers like the spi-nor driver do not assign a value
to the retlen pointer but instead only add the bytes written
to *retlen. Users of mtd_write expect the variable to be initialized
by the mtd core though, so we have to do it in mtd_write(). The
same is done in mtd_read already.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: eth: Remove ethaddr_param ...

commit d00db554 introduce ethaddr_param. But it is not initialized, so
devinfo fails to show the mac. Remove it and use edev->ethaddr.

Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx6-mmdc: Fix MAPSR usage ...

The commit ea1fb2f by Eric Nelson
imx6-mmdc: fix automatic power down enable in write level calibration

fixed the incorrect usage of the MAPSR register, but there is one more
place where the MAPSR is misused in the exact same way, so fix that as
well.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Fix bug in remap_range ...

remap_range takes generic MAP_CACHED/MAP_UNCACHED flags which are then
translated into the corresponding ARM specific bits. We call remap_range
internally from dma_alloc_* aswell, but instead of passing the generic
flags we pass the ARM specific bits.
Fix this by creating an internal __remap_range function which takes the
ARM specific bits and use it where appropriate.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: console: Use console_putc to output the carriage return ...

console_puts uses console_putc() to output characters, so the carriage
return should be output with the same function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: calculate compressed dtb len correctly ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: mx25: fix bit position of "Host power mask" ...

The bit MX25_H1_PM_BIT value is handled for port 1 as MX25_OTG_PM_BIT is
for port 0. The latter is called "OPM: OTG power mask" in the i.MX25
reference manual. Its description matches the description of "HPM: Host
power mask" for the host port which is bit 16, not 8.

The Linux kernel (as of 4.3) also has

	#define MX25_H1_PM_BIT                  BIT(16)

.

Fixes: a4076ddf6577 ("USB i.MX: Add chipidea driver support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: smhfs: Fix return value of truncate() ...

Returning -ENOSYS as a result of truncate() breaks ability to write to
semihosting host's filesystem, so change the return value to 0. This
shouldn't cause any problems since all of the funcionlaity of
truncate() should is already handled by 'open' (via O_TRUNC) and
'write' (will automatically grow the file size when writing)
automatically

Unfortunately this was missed in original commit that introduced
semihosting

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/net'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/memtest'

Merge branch 'for-next/imx'

Merge branch 'for-next/arm'

Release v2015.11.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fb: alloc or free shadowfb whether fb enabled or disabled ...

Resolution can't be changed anyway once fb_enable() has been called,
since no corresponding fb_disable() call appears in the code.

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fb: satisfy semantics for shadowfb's alloc/free ...

Console enable -> alloc shadowfb.
Console disable -> free shadowfb.
Otherwise, if resolution gets changed, shadowfb will not be affected.

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fbconsole: no need to copy extra line ...

Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: return error when save_file failed ...

When writing a file failed (e.g. due to a read-only file system), no
error was reported by the 'edit' tool. To be valid (and to not confuse
the poor user) at least '1' should be returned to indicate an error.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

edit: handle write() call errors in save_file() ...

save_file() did ignore possible errors of its write() calls.
Now the error code is used as return code for save_file().

write_full() is used instead of write() as it does not perform partial
writes which would require to check for returned size, too.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: Embedsky E9: use image name like the rest of boards ...

Use name similar to other boards thus remove freescale from image
name since this is not a Freescale board, move SoC type after
company name.

So image name changed from barebox-freescale-imx6q-embedsky-e9.img to
barebox-embedsky-imx6q-e9.img

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

embedsky-e9: enable barebox_update command for booter update ...

Simplify booter update with barebox_update command using special
IMX6 MMC BBU handler.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: wait for link OK after successfull autonegotiation ...

It may take some time for PHY to indicate link OK status after
autonegotiation completed. This change addresses this case
and prevent network commands fails due to the delay.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap socfpga: Switch in flash env loading to use different config ...

On these systems, the base arch has code to load the in flash
environment from a file located in a FAT filesystem.  This was
controlled by the config option DEFAULT_ENVIRONMENT.  However, that
option turns on compiling the env into the barebox binary itself, as a
backup if the in flash env can't be loaded.

Most other boards have in flash env support unconditionally.  But omap
and socfpga also have xloader configurations, which aren't supposed to
have environment support, either in flash or compiled in.  If the in
flash env code were unconditional, then the xloaders would gain it.

So the code depends on ENV_HANDLING, which is only set on those boards
that are supposed to have an in flash env and not set on all the
boards that aren't supposed to have it.

If someone wanted to create a board that did have a saved env, but
used an alternate to this generic omap/socfpga file in FAT method,
then they'd probably want to create a new config option to control
this code and have it not be enabled for their board.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>