Release v2017.04.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nvvar: Fix creation without value ...

When a new nvvar is added without a value we want to get the value
from the corresponding globalvar. We do this by using nv_set which
ends up freeing the exact string that we passed into nv_set as
value. This results in a corrupt value. Fix this by assigning a
value manually without calling nv_set.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

openrisc: fix call to restart_handler_register_fn ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: fix usbserial re-connect ...

With commit b4f55fcf355a ("console: expose consoles in devfs") consoles
got inserted, but never removed from devfs.
When dealing with USB consoles, barebox should be prepared for devices
spontaneously appering and disappering again (user disconnects and re-
connects the cable). If the devfs entry is not removed upon disconnect,
barebox will raise an error "device creation failed with File exists"
when the cable is connected again.

Remove devfs entries when consoles are de-registered.
Also change the error message, it's the devfs entry.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: console_get_by_name: do not strcmp NULL ...

console_get_by_name iterates through the console_list using strcmp to mach
a given console by name. console_list may contain entries with devname = NULL,
inserted there e.g. by KEYBOARD_GPIO. In worst case loady -t usbserial
will crash barebox when strcmp hits 0 NULL devname:
> unable to handle NULL pointer dereference at address 0x00000000

Let console_get_by_name just ignore the anonymous consoles.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: backend circular: Fix wrong comment ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb_kbd: release all keys on error / disconnect ...

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: bucket_circular: -EUCLEAN means data could be read ...

-EUCLEAN returned from state_mtd_peb_read() means that the
data shall still be used. This fixes initialization of buckets
which need cleanup

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: bucket_cached: Fix reading pages which need cleanup ...

When the raw device returns -EUCLEAN we have to return
successfully to the upper layer, otherwise it will discard the
data.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: fix reading data from page that needs cleanup ...

mtd_read´() returns -EUCLEAN to indicate that a page needs cleanup.
This value shouldn't be returned from the mtd read file operation
since this should return the number of bytes read.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mvebu: only build kwbootimage support if BOOTM is enabled ...

As this is the bootm image handler implementation for the kwbootimage
it is of no use if BOOTM is missing and fails to link.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ATA: mvebu: select DISK_ATA ...

The already selected DISK_IDE_SFF depends on it.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: add AFLAGS for secure monitor files ...

The instructions used in those files are only supported on ARMv7.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: i.MX7 WaRP7: remove wdog1 pinctrl workaround ...

The wdog1 pinctrl got fixed with linux upstream commit 213e51ca8df1 ("ARM:
dts: imx7: Add "LPSR" to LPSR iomux pin names").
Remove the old workaround, since it triggers a build error.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX7: Kconfig: ARCH_IMX7 selects PINCTRL_IMX_IOMUX_V3 ...

fsl,imx7d-iomuxc is provided by selecting PINCTRL_IMX_IOMUX_V3. Select it
since a system without it will not be very usefull.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: clocksoure: make sure the meassured frequency is valid ...

Some EFI implementations have a even slower tick rate and the meassured
frequency may be zero.

Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: baltos: define baltos_sram_init() return type as void ...

As stated in the routine's description this routine is to return void,
hence fix its declaration to remove compiler warning.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fix: console: expose consoles in devfs ...

on 64bit ssize_t is not an int but a long

so use the protype for fops_write ssize_t

common/console.c: In function ‘console_register’:
common/console.c:373:22: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types]
  newcdev->fops.write = fops_write;

in commit b4f55fc
By Bastian Stender <bst@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/video'

Merge branch 'for-next/usb'

Merge branch 'for-next/rpi'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/efi'

Merge branch 'for-next/dts'

Merge branch 'for-next/at91'

dts: update to v4.11-rc1 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.10-rc8 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2017.03.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>