LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2017-12-14	v2017.12.0 d67aed6 Browse files » Release v2017.12.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Dec 2017
2017-12-07	abc0447 Browse files » ARM: dts: bcm2835-rpi: re-enable booting from SD card ... Kernel commit `a19adf8` [0] changed the RPi1 device tree from &sdhci to &sdhost, which was imported in barebox commit `d14b844`. It seems that barebox does not have a driver for brcm,bcm2835-sdhost (yet), which resulted in barebox unable to boot from SD card. However, the driver for brcm,bcm2835-sdhci worked fine in the past. Although the upstream change was made for good reasons, the simplest change for barebox for now is to revert to using &sdhci and disable &sdhost. Thanks to Alexander Dahl for raising this issue on the DistroKit mailing list! [0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=`a19adf8` Cc: Alexander Dahl <post@lespocky.de> Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 6 Dec 2017 Sascha Hauer committed on 7 Dec 2017
2017-11-30	21ec7b8 Browse files » common: globalvar: fix removing multiple nvvars with wildcards ... nvvar_remove takes wildcards, so it can remove multiple variables. This means we cannot return after the first loop iteration, but instead must continue. Fixes: 609d3edc3ad9 (common: globvar: let nvvar_remove() report non-existing variable) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sascha Hauer committed on 30 Nov 2017
2017-11-21	89ad75d Browse files » usbgadget: fastboot: select FILE_LIST ... The file list functions are used by the fastboot gadget since a3976c3a84f2 (usbgadget: fastboot: Use function to find file_list entry by name). Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 17 Nov 2017 Sascha Hauer committed on 21 Nov 2017
	f199308 Browse files » imx-bbu-nand-fcb: fix build on MX28 only ... This code may be compiled without ARCH_IMX6 present, so it must not depend on any functions provided by the architecture support. Fixes: a2618c215bff (imx-bbu-nand-fcb: add support for imx6ul) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 17 Nov 2017 Sascha Hauer committed on 21 Nov 2017
	e066ea0 Browse files » ARM: imx: santaro: select i2c ... The board support tries to access a i2c bus to find out which touchscreen is connected. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 17 Nov 2017 Sascha Hauer committed on 21 Nov 2017
	16a2a96 Browse files » ARM: boards: phytec-som-am335x: Fix SPI boot script ... Because our SPI NOR flashes are too small, we require a root filesystem in a NAND media. The kernel bootargs has a wrong parameter and lead to: VFS: Cannot open root device "ubi0:root" or unknown-block(0,0): Changed 'ubi.mtd=nand0.root' to 'ubi.mtd=root'. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 17 Nov 2017 Sascha Hauer committed on 21 Nov 2017
2017-11-17	3f2df4e Browse files » fs: Fix can_lseek_backward() ... To quote corresponding man page: "... Upon successful completion, lseek() returns the resulting offset location as measured in bytes from the beginning of the file." Which for lseek(fd, 0, SEEK_SET) would be 0, so returning 'ret' as final step of the function would mean it'd never return anything but 0 as well. Change the code to explicitly return '1' to fix the problem. Fixes: 7c3f8d366 ("uimage: fix: add can_lseek_backward and use in uimage_open") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 15 Nov 2017 Sascha Hauer committed on 17 Nov 2017
2017-11-17	80c2876 Browse files » i.MX: esdhc: wait until SDSTB is asserted, not other way arround ... this added 10msec on each sd/mmc clock switch request. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 11 Nov 2017 Sascha Hauer committed on 17 Nov 2017
2017-11-13	9d842e3 Browse files » Merge branch 'for-next/omap' Sascha Hauer committed on 13 Nov 2017
	e65434f Browse files » Merge branch 'for-next/nv' Sascha Hauer committed on 13 Nov 2017
	8489388 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 13 Nov 2017
	4db085e Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 13 Nov 2017
	df605b1 Browse files » Merge branch 'for-next/efi' Sascha Hauer committed on 13 Nov 2017
	v2017.11.0 5f5dece Browse files » Release v2017.11.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Nov 2017
2017-11-10	7c3f8d3 Browse files » uimage: fix: add can_lseek_backward and use in uimage_open ... Since commit ce0cc7fe we support forward seek on tftpfs. This feature breaks the condition to check rather we open an uimage over tftp. Since backward seeking is the problem here, we add the function can_lseek_backward and check for it instead of the simple lseek. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 8 Nov 2017 Sascha Hauer committed on 10 Nov 2017
2017-11-07	2877e08 Browse files » ARM: phytec-som-am335x: Add autoenable ... Add autoenable for components, which can be populated on an AM335x phyCORE SoM. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	7a62395 Browse files » common: oftree: Add autoenable functionality ... This patch adds an API to automatically enable either hardware components with existing device drivers or i2c clients. All functions take a device tree path to find the hardware and will fix up the node status in the kernel device tree, if it's accessible. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	f34d137 Browse files » ARM: dts: AM335x: Add dummy i2c nodes ... These i2c nodes are needed for autoenable of i2c clients, because the autoenable API searches for device tree nodes to get the client address. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	9a69978 Browse files » ARM: phytec-som-am335x: Set MAC addresses from state ... If a state with the name 'am335x_phytec_mac_state' is available, valid MAC addresses from this state get registerd to their ethernet device. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	09f15cd Browse files » common: state: Add function to read state MAC ... This API function allows to receive a copy of a MAC address from variables in a state. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	dc74265 Browse files » common: state: Add variable type as enum ... The variable_type struct holds a name of its type. Checking the type of a variable with this string needs much resources. This patch introduce a enum of the variable type for better type checking. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	7126dff Browse files » common: state: Add variable_type to state_variable ... Add a pointer in state_variable to the corresponding variable_type array element. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	b4f9903 Browse files » ARM: configs: am335x_defconfig: Add state config ... Enable the state framework for all AM335x boards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	ac11a52 Browse files » ARM: dts: AM335x: Add state framework ... This patch adds the state framework with an EEPROM partition and two nodes for MAC addresses. It will be available for all phycore AM335x images with EEPROMs. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
	2a8a579 Browse files » ARM: boards: phytec-som-am335x: Add unified MLO ... PCM-060 modules only have one-bank RAMs populated, which allows us to find out the populated RAM size at run-time. Therefore, a new entry point was create 'PHYTEC_ENTRY_UNIFIED_MLO'. This creates a MLO for all modules of one family and all existing PCM-060 MLOs were replaced with this new entry point. To provide backward compatibility for older modules, these were not affected. In the first step generic RAM timings for the module family get loaded, because RAM accesses are only possible with an initialized controller. After that, the RAM size will be calculated and the RAM controller gets reinitialized with the correct RAM timings. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Daniel Schultz authored on 3 Nov 2017 Sascha Hauer committed on 7 Nov 2017
2017-11-03	77c35e7 Browse files » 2d-primitives: fix typos in function names in comments ... This fixes gl_* -> gu_* in several places. Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Nikita Yushchenko authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	1467855 Browse files » command: nv: rewrap help text lines ... Just let the help text appear a bit more aligned. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	8fc9636 Browse files » commands: nv: adjust command help ... Help did not point out that -r option requires n arguments and did not mention support for removing variables in help text. Also introduce and consistently reuse 'NV' as abbreviation for 'non volatile'. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017
	609d3ed Browse files » common: globvar: let nvvar_remove() report non-existing variable ... The former implementation did not allow to detect whether the call to nvvar_remove() succeeded or failed and always returned 0. This changes the implementation to return 0 only if a variable with the given name was found and return ENOENT otherwise. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 1 Nov 2017 Sascha Hauer committed on 3 Nov 2017