Release v2018.04.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zbarebox: Fix linking with new ld ...

Based on "333ff7b1e Fix linking with new ld, based on u-boot" Fix
building for the single PBL case aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: framebuffer: update documentation to current state ...

Framebuffer console support was added in 2015.

Reported-by: TobSnyder at #barebox irc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partition: fix typo when writing #address-cells ...

On > 4 GiB eMMC devices, barebox writes a 32-bit address and a 64-bit
size into the partition reg property, because #address-cells is
accidentally written as '#addres-cells'. This causes a fallback to
32-bit address size. Fix the typo and thereby of_partition_fixup for
64-bit partitions.

Fixes: a2fa18f9f483 ("mtd: of: Make used partition binding configurable")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: check pointer returned by get_fsdevice_by_path before dereferencing ...

In __canonicalize_path() we dereference the pointer returned by
get_fsdevice_by_path() without checking if the pointer is NULL or not.
When the pointer is NULL it leads to an Ooops.

	Ooops, address error on load or ifetch!

	$ 0   : 00000000 00000001 a0000026 a0811c10
	$ 4   : a0402e60 a0402e48 a0811c00 a0402e58
	$ 8   : 00000001 00000000 0000005a 00000023
	$12   : 00000000 00000002 00601021 00000000
	$16   : a0402e60 a0402e50 a0402e39 a0810000
	$20   : a0402e38 a0811420 a0811424 00000000
	$24   : 00000000 a080de10
	$28   : 87f87d40 a03ffa68 a0810000 a080ce30
	Hi    : 00000002
	Lo    : 00000000
	epc   : a080ce34
	ra    : a080ce30
	Status: 00000006
	Cause : 40008010
	Config: 80040483

	### ERROR ### Please RESET the board ###

Fixes: d79a81736 fs: Don't bother filesystems without link support with additional stat() calls

Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "startup: Load default environment earlier" ...

Several boards use defaultenv_append_directory() to append a board
specific envfs snippet during runtime. This only works when
defaultenv_append_directory() is called before defaultenv_load() is
exectuted. Since that was executed at the end of the start process
every initcall level could be used to append a env directory. With this
patch only initcall levels earlier than fsdevice_initcall work and
most boards do not cope with this.

Revert this patch until a better solution is found.

Reported-by: Alexander Kurz <akurz@blala.de>

This reverts commit 5b92cfc.

Merge branch 'for-next/rpi'

Merge branch 'for-next/ratp'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/fastboot'

Merge branch 'for-next/efi'

Merge branch 'for-next/dts'

Merge branch 'for-next/arm-1'

Merge branch 'for-next/arm'

of: Make locally used function static ...

__of_unflatten_dtb is only locally used and has no prototype in
include/. Make it static.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Make locally used function static ...

of_property_get_value is only locally used and has no prototype in
include/. Make it static.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: spi-nor: add support for w25q16dw ...

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: cpsw: fix probe with fixed-link ...

While cpsw is probe dt, it accepts only slaves nodes with "phy_id" property.
In case of fixed-link there are no "phy_id" property and probe would be failed.
This patch avoid the failure due to missing "phy_id" in case of fixed-link.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2018.03.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: ath79: fix different typos ...

the CONFIG typos was not real issue.
The defconfig typo i detected only after clean compile.
I hope we can migrate barebox MIPS to multiimage soon.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.16-rc2 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.16-rc1 ...

Also includeded:

ARM: dts: am33xx: do not delete no longer existing clocks

Several clocks are removed from the am33xx dts files with v4.16-rc1.
Remove the corresponding /delete-node/ directives aswell to avoid
dtc breakage.

Also included:

ARM: dts: imx6qdl: SolidRun: Fix upstream include

Upstream dts file way renamed, so change include name accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: ARM64 doen't provide the armlinux_ functions ...

Those set parameters specific to the older ARM Linux implementation.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: crypto: initialize digests earlier ...

We moved the digest init functions to coredevice_initcall level. Do
the same with the ARM specific digests aswell so that they are available
at the same time.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dts: enable heartbeat led for ar9331-dptechnics-dpt-module ...

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

docs: add reference to libratp-barebox in the remote-control docs ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: new reset command ...

E.g.:
    $ ./bbremote -v --port /dev/ttyUSB2 reset

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: new md and mw commands ...

This commit introduces support for running the md and mw commands
using the binary interface provided by RATP. This allows clients to
read and write memory files without needing to do custom string
parsing on the data returned by the console 'md' and 'mw' operations.

The request and response messages used for these new operations are
structured in the same way:

 * An initial fixed-sized section includes the fixed-sized
   variables (e.g. integers), as well as the size and offset of the
   variable-length variables.

 * After the initial fixed-sized section, the buffer is given, which
   contains the variable-length variables in the offsets previously
   defined and with the size previously defined.

The message also defines separately the offset of the buffer
w.r.t. the start of the message. The endpoint reading the message will
use this information to decide where the buffer starts. This allows to
extend the message format in the future without needing to break the
message API, as new fields can be appended to the fixed-sized section
as long as the buffer offset is also updated to report the new
position of the buffer.

E.g.:
    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0102030405
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0102030405

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0000000000
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>