Release v2018.05.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: arm32: fix realocate_to_curr_addr ...

After add aarch64 support (commit 868df08)
to realocation, MLO on beaglebone black do not boot any more.
The issue is, that addition of offset in one if-case was not done.
This patch fix this.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: omap: set hwdev before call watchdog_register ...

Since watchdog_register access to hwdev (see
commit 65a6443)
hwdev has to be initiate/set before calling watchdog_register.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

watchdog: core: check hwdev before use it ...

Avoid null pointer access, if hwdev was not
set before call watchdog_register.

Signed-off-by: Andreas Schmidt <mail@schmidt-andreas.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: i2c_write: enable reg == 0 too ...

This commit fixes the mistake introduced in the commit 34fadb685905
('commands: i2c_write: enable raw write to address').
The intended behaviour for i2c_write command is
"use raw i2c write only if reg address is not defined".
Before the commit 34fadb685905 reg address == 0
was acceptable. After the commit 34fadb685905 reg address == 0
became unacceptable ("undefined") and will lead to raw i2c write.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gitignore: Add *.pblx files ...

Looks like *.pblx was accidentally dropped from ignored files list and
now my "git status" is clobbered by every *.pblx image that is being
built (that's quite a lot for imx_v7_defconfig). Re-add original rule
to prevent that.

Fixes eed8a41c5 ("gitignore: ignore pblx.simximg files")

Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9063: Fix compilation ...

Fixes: 1ef7cd07a3 watchdog: rename dev to hwdev

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX53 TX53: remove duplicate _imx53 ...

The pblx-y variables for the TX53 have _imx53 twice in their names. With
this the names do not match the names in the FILE_* variables. This
results in the make system removing the pblx files as intermediate
files. Fix the names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boards: samx6: Adjust to latest get_runtime_offset() ...

Latest version of get_runtime_offset() returns positive offset that
needs to be added to rather than substracted from original pointer.

Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX53/TX53: Adjust to latest get_runtime_offset() ...

Latest version of get_runtime_offset() returns positive offset that
needs to be added to rather than substracted from original pointer.

Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

doc: bcm283x: update documentation for Raspberry Pi ...

The old way does not seem to work for RPi 3, as the UART pins are
mapped differently and the NOOBS bootcode does not seem to read a
config.txt.

Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mmu64: Add commment ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/watchdog'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/fs'

Merge branch 'for-next/dts'

Merge branch 'for-next/arm'

ARM: socfpga: remove nonexistent Kconfig dependency ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

loadenv: Do not depend on normalise_path() ...

normalise_path() will go away, so do without it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ls: Do not depend on normalise_path() ...

When we want to show a directory we want to show the path
ls is passed, not the normalised one.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

glob: do not unnecessarily opendir() a directory ...

opendir() can trigger automounts, so do not use it when the
pattern we examine doesn't have any wildcards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Fix finding correct directory for mkdir/rmdir ...

When there are links in the path mkdir/rmdir are called with then
canonicalize_path is needed which resolves the links.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Cleanup whitespace damage ...

fs.c has some whitespaces where there should be tabs. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Move mem_write/mem_read to devfs-core ...

fs.c is already heavily filled with code. Move mem_write/mem_read
to devfs-core where it fits better.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: Add super_operations ...

Add a struct super_operations we can use later when we get a fs
implementation closer to Linux. Only add the functions we'll likely
need though.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubifs: remove dead code ...

Remove code that was added to UBIFS for U-Boot but that is not needed
for barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubifs: Remove Linux struct definitions we already have ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubifs: remove dead code ...

Remove stuff that was added to UBIFS for U-Boot which we do not need
because we already have it in the Linux header files.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>