LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2018-06-26	9d7d333 Browse files » usb: imx: implement support for limiting host to full speed ... This is needed when host is known to not work properly in high speed mode. In linux, chipidea driver supports 'maximum-speed' device tree property. When that is set to "full-speed", driver sets PFSC bit in PORTSC register, which disallows use of high speed mode. This patch implements same support for barebox. Important technical detail is that PFSC bit is cleared by port reset, thus setting it has to be done in ehci->init() callback which is called after ehci_reset(). Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Nikita Yushchenko authored on 22 Jun 2018 Sascha Hauer committed on 26 Jun 2018
2018-06-25	0257de4 Browse files » drivers: of: Make use of devpath_to_name() ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 24 Jun 2018 Sascha Hauer committed on 25 Jun 2018
	f20f5ec Browse files » commands: mmc_extcsd: Make use of devpath_to_name() ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 24 Jun 2018 Sascha Hauer committed on 25 Jun 2018
	8ca7053 Browse files » commands: mount: Make use of devpath_to_name() ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 24 Jun 2018 Sascha Hauer committed on 25 Jun 2018
	578db47 Browse files » fs: devfs-core: Make use of devpath_to_name() ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 24 Jun 2018 Sascha Hauer committed on 25 Jun 2018
	136a744 Browse files » MIPS: dts: fix dtc unit_address_vs_reg warning ... Unit number is added to the /memory nodes to fix this dtc warning: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 21 Jun 2018 Sascha Hauer committed on 25 Jun 2018
	c871d35 Browse files » MIPS: dts: drop skeleton.dtsi ... Based on feedback from Sascha: http://lists.infradead.org/pipermail/barebox/2018-April/032694.html " skeleton.dtsi should no longer be used " Several reasons to remove skeleton.dtsi are explained in the linux commit 3ebee5a2e141 ("arm64: dts: kill skeleton.dtsi"). Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 21 Jun 2018 Sascha Hauer committed on 25 Jun 2018
2018-06-22	e4067b7 Browse files » dts: update to v4.18-rc1 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Jun 2018
2018-06-21	782dd52 Browse files » video: Port RAVE SP backlight driver from Linux kernel ... This is a minimal port of a kernel commit 6552d3141064 ("backlight: Add RAVE SP backlight driver"). All of the changes were kept to a minimum and limited to impedance matching between Barebox/Linux driver API. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Jun 2018 Sascha Hauer committed on 21 Jun 2018
	5966868 Browse files » nvmem: Port RAVE SP EEPROM driver from Linux kernel ... This is a minimal port of a kernel commit 3b51f47be171 ("nvmem: Add RAVE SP EEPROM driver"). All of the changes were kept to a minimum and limited to impedance matching between Barebox/Linux driver API. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Jun 2018 Sascha Hauer committed on 21 Jun 2018
	898ec20 Browse files » video: backlight: add slew time parameter ... Currently the backlight implementation stretches a brightness change over a period of 100ms. While this is a fine default for PWM backlights, a user might wish to change this slew time to meet other constraints or even completely disable it for some backlight devices. Add a parameter and provide the default value from the backlight device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 20 Jun 2018 Sascha Hauer committed on 21 Jun 2018
	43a56c8 Browse files » ARM: i.MX: rdu2: Make use of imx_setup_pad() ... While at it, also remove pinux configuration for RX pin (completely unused) and fix strange setup_uart()'s indentation. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Jun 2018 Sascha Hauer committed on 21 Jun 2018
	44de85b Browse files » ARM: i.MX: babbage: Make use of imx_setup_pad() ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Jun 2018 Sascha Hauer committed on 21 Jun 2018
2018-06-20	be940f1 Browse files » mmc_extcsd command: Add cmd option to set bkops-enable ... This patch is for convenience to set bkops-enable (EXT_CSD_BKOPS_EN[163]) on devices which have it not yet activated. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 18 Jun 2018 Sascha Hauer committed on 20 Jun 2018
2018-06-20	51c0c64 Browse files » nand-bb: mtd_del_bb: fix missing pointer reset ... If an attached bb device was removed before the actual mtd device the code would try due to a missing pointer reset to access the no more present bb device handle which leads to a page fault. This bug was made visible by commit "7649473 mtd: nand: remove automatically created bb devices" which relys on a correct mtd->cdev_bb handling. Signed-off-by: Heinrich Toews <heinrich.toews@wago.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Heinrich Toews authored on 18 Jun 2018 Sascha Hauer committed on 20 Jun 2018
2018-06-19	b6c1876 Browse files » ARM: dts: advantech-rom-7421: add hog pinctrl node ... The Advantech ROM-7421 has a custom watchdog reset i2c chip that has some control gpios. This watchdog is currently not used, therefore mux its control pins as pull-downs to be sure that the watchdog is disabled after e.g. a reboot. For debug purposes this patch also adds i2c1 node. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 17 Jun 2018 Sascha Hauer committed on 19 Jun 2018
	1cbb66f Browse files » console_simple: add newline conversion for putc_ll case ... When console_putc uses putc_ll for early printing then it must do a newline conversion as putc_ll doesn't do it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	aa796bb Browse files » console_simple: Fix newline conversion ... Newline should be "\r\n" rather than "\n\r" Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	eeade80 Browse files » console_simple: Remove duplicated newline conversion ... console_puts uses console_putc for printing which already does newline conversion, so do not do it again in console_puts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	505b897 Browse files » console: remove duplicate newline conversion ... When the console is not yet fully initialized then console_puts falls back to print characters using console_putc. console_putc already does newline conversion, so do not repeat it in console_puts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	6690317 Browse files » console: add missing newline conversion for putc_ll ... putc_ll doesn't do newline conversion (and it shouldn't do, as it's a static inline function for early debugging, adding more code there is not nice), so add newline conversion to the console code when it uses putc_ll for printing early messages. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	2ce790a Browse files » console: Fix console_get_first_active() ... Fix if condition in console_get_first_active() to actually check that both bit are set. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 15 Jun 2018 Sascha Hauer committed on 19 Jun 2018
	9ba8ede Browse files » dtc: Disable some warnings ... Disable the dtc warnings that are disabled in the kernel aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	5384fb2 Browse files » ARM: dts: imx6q-var-custom: remove some accidently pasted text ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	d064a7f Browse files » ARM: dts: remove @0 from environment nodes ... The environment nodes do not have a reg property and as such should not have a @0 suffix. Newer dtc warns about this, so remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	399068d Browse files » console: Update description for global.linux.bootargs.console ... Replace linux,stdout-path with stdout-path as the former is deprecated. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
	eea46c2 Browse files » ARM: dts: use stdout-path property ... linx,stdout-path has been deprecated. Use stdout-path instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jun 2018
2018-06-18	a54a47f Browse files » MIPS: bootm: add ELF handler ... With this handler barebox will be able to start linux kernel as is, without additional image conversion. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 6 Jun 2018 Sascha Hauer committed on 18 Jun 2018
	7c8679e Browse files » add basic ELF parser ... This parser is needed for kernel boot support on MIPS and can potentially reused on other platforms. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 6 Jun 2018 Sascha Hauer committed on 18 Jun 2018
	9fe4ab9 Browse files » ARM: mmu: psci: Make use of get_ttbr() ... Introduce a simple inline function to get TTBR and use it in mmu.c and sm.c Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 15 Jun 2018 Sascha Hauer committed on 18 Jun 2018