LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2018-10-02	45d2ef9 Browse files » ARM: dts: socfpga: achilles: enable second ethernet port ... The Reflex Achilles has 2 ethernet ports. Enable the second one, too. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 28 Sep 2018 Sascha Hauer committed on 2 Oct 2018
	01c291a Browse files » ARM: socfpga: achilles: let bootchooser boot from system0 initially ... Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 28 Sep 2018 Sascha Hauer committed on 2 Oct 2018
	806f7c1 Browse files » ARM: socfpga: achilles: bitstream will not exceed 32M ... Thus we decrease offsets to save space Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 28 Sep 2018 Sascha Hauer committed on 2 Oct 2018
	074341b Browse files » ARM: socfpga: achilles: move partitions to free disk space ... Prior to this, environment and state was placed inside the redundant barbeox copies. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 28 Sep 2018 Sascha Hauer committed on 2 Oct 2018
	39f63b9 Browse files » barebox: move mmc partitions to partitions subnode ... Linux kernel implicitly adds this, thus we have to add them explicitly to stay compatible Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 28 Sep 2018 Sascha Hauer committed on 2 Oct 2018
	b6241b0 Browse files » dts: achilles: add state for bootchooser ... Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Jorns authored on 28 Sep 2018 Sascha Hauer committed on 2 Oct 2018
	0d98690 Browse files » usb: gadget: fastboot: fix downloading files of wMaxPacketSize bytes ... File transfers with sizes of exact multiples of wMaxPacketSize up to EP_BUFFER_SIZE do not work. For a typical scenario that would be files of 512, 1024 ... 3584 bytes. This happens because we unconditionally put EP_BUFFER_SIZE into the initial request length. For non wMaxPacketSize aligned lengths this works well because the transfer is completed with a short packet. For wMaxPacketSize aligned lengths there is no short packet though, so the transfer never completes. Instead we have to put the file size into the initial request length. Some controllers like the DWC3 do not work when the request length is not aligned to wMaxPacketSize, so we align up to wMaxPacketSize like done in U-Boot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reported-by: Gavin Schenk <g.schenk@eckelmann.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Sascha Hauer committed on 2 Oct 2018
2018-09-28	44b4a1c Browse files » fs: ubifs: Do not free memory not allocated by ubifs ... Since the switch to dentry cache implementation we no longer allocate the super block, so we must not free it in the error path. Fixes: ("4d2b23bcf9 fs: ubifs: Switch to dentry cache implementation") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Sep 2018
2018-09-27	5154902 Browse files » fs: ramfs: make chunk counting in truncate() better readable ... In ramfs_truncate() "newchunks" denotes the number of chunks we want to have after the call. We decrease that number while iterating over the existing chunks and decrease it further with every newly allocated chunk until "newchunks" is zero. This is a bit hard to read. Instead we drop the decreasing while iterating over existing chunks and increase "oldchunks" while allocating until it reaches "newchunks". This is mainly done to make the next patch easier. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Sep 2018
2018-09-26	31cc20b Browse files » fs: stat: Do not forget to set errno ... stat() needs to set errno correctly when returning with an error. Fixes: b3fbfad7ae ("fs: dentry cache implementation") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2018
	197489b Browse files » fs: open: Do not forget to set errno ... When the initial lookup fails in open we have to go to the error path which sets errno correctly rather than returning directly. Fixes: b3fbfad7ae ("fs: dentry cache implementation") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2018
	a451447 Browse files » fs: ramfs: Free data when file is unlinked ... Since the switch to dentry cache implementation the memory is no longer freed when a file in ramfs is deleted. Fix this. Fixes: b283b72639 ("fs: ramfs: Switch to dentry cache implementation") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2018
	f701414 Browse files » state: backend_bucket_circular: fix for non power of 2 writesize ... backend_bucket_circular currently assumes writesize is power of 2, which makes it fail on dataflash devices, where this assumption is false. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ladislav Michl authored on 25 Sep 2018 Sascha Hauer committed on 26 Sep 2018
	9cfd8c2 Browse files » spi: atmel_spi: fix duplicate const warning ... Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ladislav Michl authored on 25 Sep 2018 Sascha Hauer committed on 26 Sep 2018
	d5d470b Browse files » .gitignore: Add .bin.gen.S files found firmware/ ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Sep 2018 Sascha Hauer committed on 26 Sep 2018
	b234a6d Browse files » environment: Do not use environment when overlapping with other partitions ... Environment partitions are usually specified with their hardcoded offset and size, either in the device tree or the board file. These partitions potentially overlap with other partitions read from the partition table. Overlapping partitions for sure have bad effects. Be more friendly to our users and warn them when such a situation occurs and stop using that partition for storing the environment. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2018
	6f9fd8b Browse files » ratp: select CMDLINE_EDITING ... ratp seems to send special characters which are not handle correctly without CDMLINE_EDITING. Without this config, commands run via ratp will have an erratic behavior and/or incorrect output. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Clément Leger authored on 24 Sep 2018 Sascha Hauer committed on 26 Sep 2018
2018-09-25	ce2484d Browse files » imx-bbu-nand-fcb: Workaround ROM checking fingerprint before correcting bitflips ... The FCB block is protected with a ECC code which can correct 1bit errors and detect 2bit errors. This works fine for all fields except the fingerprint marker (Containing "FCB") and the version field. Here the ROM chooses to check the correct value of the fields before running the ECC correction. Thus a FCB is not used by the ROM anymore when it has a bitflip in the fingerprint or version. For us this means we have to rewrite the FCB in this case, so reject the faulty FCB in read_fcb_hamming_13_8() which triggers a rewrite during the check operation. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2018
	1994145 Browse files » imx-bbu-nand-fcb: Workaround ROM not being able to handle bad blocks properly ... When reading a firmware image the ROM only checks for a bad block when advancing the read position, but not if the initial block is good. Hence we cannot directly point to the first firmware block, but must instead point to the first good firmware block. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2018
	ef72ed5 Browse files » imx-bbu-nand-fcb: Improve error message ... When printing that a FCB is not readable it's interesting to know which one is not readable. Print the block number in the message. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2018
	55e61ea Browse files » mtd: mtdraw: fix wrong alignment check ... The write offset must be raw page size aligned on entry, not page size aligned. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2018
	df11ab3 Browse files » mtd: mtdraw: replace "block" with "page" ... When the code says "block" it actually means "page" as this is what the code handles. Rename the functions and variable names accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Sep 2018
2018-09-24	43ed323 Browse files » ARM: i.MX8MQ: Add node for CPU thermal sensor ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	0b4d8ba Browse files » aiodev: Port Linux driver for i.MX8MQ CPU thermal sensor ... This patch is a minimal port of the corresponding driver that can be found in Linux kernel (drivers/thermal/qoriq_thermal.c). Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	6f2d609 Browse files » clk: i.MX8MQ: Add missing IMX8MQ_CLK_TMU_ROOT clock ... Add missing IMX8MQ_CLK_TMU_ROOT clock needed for CPU thermal sensor. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	f3eafd8 Browse files » ARM: nxp-imx8mq-evk: Make use of memory size detection code ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	3da52f3 Browse files » ARM: i.MX: esdctl: Add memory size detection for i.MX8MQ ... Add memory size detection for i.MX8MQ. Only basic LPDDR4 configurations are supported for now. Support for other types of memory can be added later once we have any boards that use it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	978f2c8 Browse files » ARM: nxp-imx8mq-evk: Add FEC's PHY configuration code ... Add appropriate DT and PHY fixup code needed for i.MX8MQ EVK board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	07acb8c Browse files » ARM: nxp-imx8mq-evk: Add missing compatibility check ... Add missing compatibility check to imx8mq_evk_mem_init() to prevent it from being executed for other i.MX8MQ boards. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018
	4b841af Browse files » ARM: i.MX8MQ: Configure FEC1 clocks ... Select proper parents as well as rates for FEC1 related clocks. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 21 Sep 2018 Sascha Hauer committed on 24 Sep 2018