ARM: rpi: use sdhost for eMMC access on CM3. ...

This commit removes the fix for the upstream devicetree where eMMC was remapped
to the sdhci interface. This is no longer needed since sdhost driver is now
functional in barebox. A similar change was done to the R.Pi 3 devicetree in
9036d1db.

In fact, this remap prevented CM3 from booting if barebox was compiled with
CONFIG_MCI_BCM283X_SDHOST (in rpi_defconfig since b093468c). In that case both
sdhost and sdhci drivers were active and tried to set their corresponsing alt
functions for the same set of GPIOs at the same time.

Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add gdb helper scripts to load barebox symbols ...

Add a gdb script with two helper functions which use the new
pbl_barebox_break symbol to calculate the current barebox load address
on the device and loads a barebox ELF file to this address.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add CONFIG_PBL_BREAK option ...

With this option barebox will be build with breakpoint instruction
in early pbl stage.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Regenerate defconfig files ...

Update defconfig files with the following script.

for a in arch/*; do
	arch=$(basename $a)
	for c in $a/configs/*; do
		config=$(basename $c)

	export ARCH=$arch
	make $config && make savedefconfig && mv defconfig $c
	done
done

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: HABv4: use min_t instead of min ...

This fixes a compiler warning because len is size_t and
RNG_FAIL_EVENT_SIZE was cast to uint32_t.

Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zii-imx7d-dev: Add support for RMU2 board ...

Add support for Remote Modem Unit i.MX7D board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx7d-zii-rpu2: Switch to using kernel DTS ...

Now that it is availible, switch to using kernel DTS.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Rename zii-imx7d-rpu2 to zii-imx7d-dev ...

To prepare for addition of another ZII i.MX7D based board, i.MX7D
RMU2, rename zii-imx7d-rpu2 to zii-imx7d-dev to avoid any image naming
confusion.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: zii: Fix buggy check_bits_set_32 ...

Fix a buggy while loop expression, that, due to '==' operator's
precedence (higher than that of '&') was always evaluating to false
rendering busy loop into a no-op.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: zii-vf610-dev: Reconcile DDR setup with DCD ...

Reconcile DDR setup code with corresponding DCD line by line, to avoid
having any doubts if the two are identical (there wer some minor
differences).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: zii-vf610-dev: Add necessary post reset delay ...

As observed on CFU1 board, without this delay we interrupt mask ROM
code execution even before it sets up any PLLs correctly preventing
Barebox from correctly starting up. Fixing this by adding PLL setup
code to OpenOCD script helps somewhat and Barebox starts, howerver CPU
started this way ends up being unstable crashing randomly during
further Barebox use.

Adding a simple 100 ms post reset delay resolves all of the described
issues. This is also consistent with how other ZII boards are set up.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: zii-vf610-dev-rev-c: Fix DTS warning ...

Add missing #address-cells and #size-cells to fix a warning

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: zii-vf610-dev-rev-b: Fix DTS warning ...

Add missing #address-cells and #size-cells to fix a warning

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: zii-vf610-dev-rev-c: Use SPDX tag in DTS ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: zii-vf610-dev-rev-b: Use SPDX tag in DTS ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dts: tplink-mr3020: add missing stdout-path property ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: ar933x: set linux_console_name ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: user manual: update MIPS-specific targets ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: Kconfig: move ARCH_TEXT_BASE to top mips Kconfig file ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: gpio: add sda/scl-gpios property support ...

The gpios property is marked as deprecated since kernel 4.15 so we
should support the "new" mechanism too. The new mechanism has a higher
priority than the deprecated one.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: relocate_code: fix barebox image memcpy() size ...

In this relocate_code() piece 'length' is greater than 'barebox_image_size':

    #define MAX_BSS_SIZE SZ_1M
    ...
    length = barebox_image_size + MAX_BSS_SIZE;
    relocaddr = ALIGN_DOWN(ram_size - barebox_image_size, SZ_64K);
    ...
    memcpy((void *)relocaddr, __image_start, length);

so 'ram_size' overflow occurs during memcpy().

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: lib/Makefile: fix whitespaces ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp: turn on GPIO related options ...

Now with pinctrl/GPIO support, enable some useful GPIO-related
drivers and commands.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: stm32mp157a-dk1: enable heartbeat and error LEDs ...

Now that we have GPIO support, add the red LED to the barebox
device tree and override the blue one's default state.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: add driver for STM32 GPIO and pin multiplexer ...

This adds driver support for the 12 GPIO banks on the STM32MP157.
As they are accessible to both the Cortex-A cores as well as the Cortex-M
core, modifications to these are protected by a hardware spinlock
and clocks are enabled/disabled as required.

All register fiddling done by the driver is collected in <soc/stm32/gpio.h>,
so future PBL code may make use of it as well to chainload barebox proper.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: add stubs for hardware spinlocks ...

Some STM32MP Linux drivers, which could be ported to barebox as part of
improved second stage barebox support, are using hardware spinlocks to
coordinate access between the three processors. While barebox only
uses one of the two Cortex-A cores, spin locks may still be necessary
because of firmware loaded unto the Cortex-M.

To ease porting these drivers, without having to import the hw spinlock
driver now, add stubs for the functions.

The stubs will we be reused when CONFIG_HWSPINLOCK is introduced,
but is disabled in config. The API is oriented after the implementation
in U-Boot.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: add gpio_get_chip helper ...

Pinctrl nodes adhering to the generic pinctrl bindings may contain
properties like input-low/input-high, which require pinctrl_ops.set_state
to have a handle on the relevant gpio chip.

Currently this would lead to code duplication: Both the pinctrl driver
and gpiolib will need to store a list of registered gpiochips.

Avoid this by providing a helper to query the registered gpio_chip
given a gpio's number.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: stm32mp: factor out common DK nodes into dtsi ...

The DK2 appears to be just the DK1 with a display, thus factor out the
barebox-specifics into a new stm32mp157a-dk1.dtsi, which we can include
in both device trees after including the upstream device tree.

As the updated device tree introduced new nodes, the now duplicates
(&ethernet0, &uart4, /chosen and /aliases) are dropped from the barebox
device as part of this commit as well.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: stm32mp157a-dk1.dts: include upstream dts before barebox' ...

To allow "stm32mp157c.dtsi" to extend nodes in <arm/stm32mp157c.dtsi>,
it should be included after it. Do this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp: enable watchdog in defconfig ...

With the IWDG driver implemented in barebox, have it be part of the
default configuration.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>