Release v2019.12.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "mci: core: make mci_register -EPROBE_DEFER sensitive" ...

The patch does the right thing: When a regulator can't be found and
-EPROBE_DEFER is returned we forward it. However, we have several boards
in the tree which do not have any driver for the regulator, but still
work because the regulator is enabled by default or by board code.

Revert this patch until a solution for these board is found.

This reverts commit 2e16c52.

clk: i.MX6ul: Disable GPMI_IO clk before reparenting ...

Before reparenting the ENFC_SEL mux we have to make sure the GPMI_IO clk
is disabled as recommended in the reference manual. Otherwise glitches
may occur on the GPMI clk which result in a later NAND failure:

MXS: Timeout resetting block via register 0x01806000
mxs_nand 1806000.gpmi-nand@1806000.of: probe failed: Connection timed out

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: spi-nor: fix wrong value for CR_QUAD_EN_SPAN ...

Durign a previous patch, 0x2 was mistakenly converted to BIT(2) whereas
it should be BIT(1).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pstore: remove unused goto label ...

Previous refactoring removed jumps to fail_clear. Remove it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pstore: fix build by re-resolving botched merge conflict ...

297ac7288 ("pstore: Only capture log messages") removed the pstore console.
v3 of the eventually merged 75a74b5c ("console: fix out-of-bounds read
in dputc(/dev/*, ...)") reinstated part of this code, which broke the
pstore build because the now removed bufsize member had a user
reintroduced in the patch.

Fix this by reverting the offending patch's changes to the pstore code.
It wasn't applicable to begin with.

Fixes: 75a74b5c ("console: fix out-of-bounds read in dputc(/dev/*, ...)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: da9053: fix typo in variable name ...

Fixes: 06928c7d1758 (mfd: da9053: use new reset_source_set_device)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

image: add zynqimg to gitignore ...

Those are results of the Zynq image build, don't clobber the
git status output.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: fix NULL pointer use in dev_printf ...

Inside mdio_register, a read of the PHY's id register is attempted.
If it fails, we print an error message with eqos_err, which uses the
ethernet device's unique name, but at this time there has been none set,
because eth_register was not yet called. Fix this by using the MDIO bus
device instead.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: enable clocks before mdio_register ...

We can't be using the MAC including the MDIO controller while the clocks
are off, but this is exactly the case when mdio_register is called and
the interface is not yet up. To allow reading the PHY id to succeed
before the interface is up, turn on the clocks as part of the
initialization in the probe.

This fixes following error at probe time:

    ERROR: <NULL>: MDIO not idle at entry

The NULL is fixed in a follow-up commit.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: properly stop DMA on halt ...

Specifying ->halt only means that it's called along with eth_unregister.
If we want to halt the DMA, we will have to call it ourselves in the
remove callback. Do this.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

filetype: mvebu: Fix kwbimage v1 detection ...

The kwbimage detection calculates a checksum over the first 31 bytes of
the image. This is correct for the v0 image format, but for the v1 image
format the checksum in the image also covers the extenstion headers.
These might not be completely present in the initial buffer provided to
file_detect_type(), so just drop the checksum calculation for v1 images.

Fixes: bf8b6d46db ("kwbimage_v0: add support to detect and boot a mvebu v0 image")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: dwc3: Remove wrong error messages ...

When phy_get() returns -ENOSYS or -ENODEV it means we can go without
phy. Do not print an error message in this case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: designware: eqos: stop DMA on halt ...

designware_eqos.c contains an eqos_stop implementation to stop the NIC
when halting the interface. Unfortunately it wasn't used leading to
memory corruption on boot, possibly due to DMA. Fix this.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: am335x: Fix am335x_sdram_size() not running at link address ...

am335x_sdram_size() may be called when we are not running at the
address we are linked at. This means tree switch conversions and
jump tables will not work. Disable these in the CFLAGS for this
file.
This fixes a crash in am335x_sdram_size() with newer gcc versions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: am335x: Enable MMC2 clock ...

Since Kernel commit 5b63fb90adb9 ("ARM: dts: Fix incomplete dts data for
am3 and am4 mmc") (barebox commit 419db1f984 ("dts: update to
v5.3-rc7")) the AM33xx MMC2 controller is unconditionally enabled in the
dts. This has the effect that the driver probes for this device and then
can't access the registers as the clock is disabled. Enable the clock to
let the driver probe successfully.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: mmu-early: On i.MX6 with HAB map ROM is mapped without XN ...

On i.MX6 with HAB enabled we call into the ROM later in
imx6_hab_get_status(). This only works when the XN bit is not set for
this area, so remap the first MiB as cached which doesn't have the XN
bit set.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/zynqmp'

Merge branch 'for-next/watchdog'

Merge branch 'for-next/stm32'

Merge branch 'for-next/socfpga'

Merge branch 'for-next/misc'

Merge branch 'for-next/mips'

Merge branch 'for-next/imx'

Merge branch 'for-next/ext4'

Merge branch 'for-next/efi'

Merge branch 'for-next/dts'

dts: update to v5.4-rc6 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2019.11.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: dts: stm32mp: report psci v0.2 at least ...

ARM TF-A reports compatibility with PSCI v1.1 since v1.5. Upstream
ARM TF-A support for STM32MP was introduced with v1.6.
It's thus safe to assume that the STM32MP barebox will never have to
interact with a secure monitor implementing PSCI v0.1.

Overwrite the psci device tree compatible to specify v0.2. This is the
first version that implements PSCI_VERSION, which allows the barebox
psci client driver selected in this commit to query the actual PSCI
version and fix it up into the device tree.

This fixes an issue where resetting via PSCI fails in Linux because the
upstream device tree compatible:

  reboot: Restarting system
  Reboot failed -- System halted

Reported-by: Michael Olbrich <mol@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>