LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

2020-02-18	8011199 Browse files » Merge branch 'for-next/optee' Sascha Hauer committed on 18 Feb 2020
	d69b7f3 Browse files » Merge branch 'for-next/mmc' Sascha Hauer committed on 18 Feb 2020
	d6787a3 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 18 Feb 2020
	0a54a21 Browse files » Merge branch 'for-next/layerscape' Sascha Hauer committed on 18 Feb 2020
	eae12f7 Browse files » Merge branch 'for-next/imx-nand' Sascha Hauer committed on 18 Feb 2020
	36bd74e Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 18 Feb 2020
	73e382e Browse files » Merge branch 'for-next/imdcrc' Sascha Hauer committed on 18 Feb 2020
	12a6a46 Browse files » Merge branch 'for-next/dts' Sascha Hauer committed on 18 Feb 2020
	ebc0248 Browse files » Merge branch 'for-next/clk-conf' Sascha Hauer committed on 18 Feb 2020
	81ce4a7 Browse files » dts: update to v5.6-rc1 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Feb 2020
2020-02-17	v2020.02.0 849b2f8 Browse files » Release v2020.02.0 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Feb 2020
	87bf44e Browse files » include: spi: add SPDX GPL-2.0-only license tags for files without licensing information ... According to our /README, GPL-2.0-only applies for the whole project except noted otherwise. Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
	16fb56a Browse files » include: spi: add SPDX GPL-2.0-or-later license tags where applicable ... Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
	296eec2 Browse files » include: add SPDX LGPL-2.1-or-later license tags where applicable ... Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
	918c938 Browse files » LICENSES: add LGPL-2.1-or-later ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
	2c74908 Browse files » include: add SPDX GPL-2.0-only license tags for files without licensing information ... According to our /README, GPL-2.0-only applies for the whole project except noted otherwise. Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
	9d90f94 Browse files » include: add SPDX GPL-2.0-or-later license tags where applicable ... Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
	46306e7 Browse files » include: add SPDX GPL-2.0-only license tags where applicable ... Interpret "GPLv2" as "GPLv2 only". Signed-off-by: Roland Hieber <rohieb@rohieb.name> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Roland Hieber authored on 13 Feb 2020 Sascha Hauer committed on 17 Feb 2020
2020-02-14	f246b40 Browse files » i2c_probe command: Use kstrtoint ... Use kstrtoint rather than simple_strtoul to catch erroneous input like "i2c1" which previously was silently interpreted as "0". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Feb 2020
	e43eed6 Browse files » commands: boot: create boot entries on demand ... We currently create all boot entries before attempting boot. This is less than optimal, because this may involve probing devices that won't be used for actual boot. Fix this by not creating boot entries till the previous boot argument (command line argument or boot.default word) was found to be unbootable. This means that "boot mmc1 mmc0" will now not touch mmc0 if mmc1 had a bootable entry. This is only done when no menu or list was requested. As the boot entries are in a linked list, the allocation done for each boot argument could be omitted, but as the saving from skipping an allocation is easily dwarfed by the boot medium access, we just reallocate and enjoy the improved code clarity. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 12 Feb 2020 Sascha Hauer committed on 14 Feb 2020
	4c368ee Browse files » commands: boot: refactor boot entry creation to use iterators ... We currently create all boot entries before attempting boot. This is less than optimal, because this may involve probing devices that won't be used for actual boot. In preparation for changing this, refactor the code, so we only have one loop we need to touch. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 12 Feb 2020 Sascha Hauer committed on 14 Feb 2020
	d587d9d Browse files » mci: core: populate mci_ios.timing member ... So far we passed an uninitialized timing member in the ios to the ->set_ios of the host controller drivers. To allow extension for new modes that need MCI host support beyond the usual clock rate change, make the member useful: - populate is with the correct value - add some type safety by using an enum - print it in the devinfo output Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 12 Feb 2020 Sascha Hauer committed on 14 Feb 2020
	6f47498 Browse files » mci: stm32_sdmmc2: add High-Speed (26 & 52 MHz) support ... The SDMMC2 doesn't need any special setup for High-Speed modes, except for the clock changes. Thus set the cap flags if the max clock would allow for the higher speed mode. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 12 Feb 2020 Sascha Hauer committed on 14 Feb 2020
	ee6a508 Browse files » serial: ns16550_pci: fix possible read of uninitialized variable ... When quirk->init is NULL, we evaluate an uninitialized rc. Is we have already checked for rc < 0 at the point of assignment, this if clause isn't needed. Remove it. Signed-off-by: Ahmad Fatoum <ahmad@a3f.at> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 12 Feb 2020 Sascha Hauer committed on 14 Feb 2020
2020-02-13	8b2104d Browse files » driver: Call of_clk_set_defaults for each probed device ... So far we only honour the assigned-clocks and assigned-clock-rates device tree properties for the clock controller nodes. With this patch we also honour the properties for each device which is done by Linux as well. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	ecebdf1 Browse files » clk-conf.h: Add static inline wrapper for of_clk_set_defaults() ... Will be needed once we call of_clk_set_defaults() from the driver core. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	76543f1 Browse files » clk-conf.h: Add missing re-inclusion protection ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	b043601 Browse files » usb: gadget: fsl_udc: remove unnessary argument ... fsl_build_dtd() returns the length of the dTD, but it is never used. Remove the length argument from the function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	688db69 Browse files » scripts: imx-usb-loader: dladdr is unused, remove it ... The download address is the same as the place we put the header to, so we can drop the calculation of dladdr and use header_addr directly. Tested on i.MX51, i.MX53 and i.MX6 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020
	02f37e1 Browse files » scripts: imx-usb-loader: download address is always the header address ... We always have to upload the image beginning with the header, we have to skip everything that is before the header. In MODE_BULK this is explicit, but in HID mode this is obfuscated by doing several calculations with helper variables. Drop this and simplify code. Tested on i.MX51, i.MX53 and i.MX6 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Feb 2020