usb: chipidea-imx: check return value of regulator_get() ...

The VBUS regulator is optional for the chipidea-imx glue, so it must
be checked if regulator_get provided a valid regulator handle before
trying to enable the regulator.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PCI: imx6: properly shut down core when leaving barebox ...

As the i.MX6 PCIe core doesn't have a software reachable reset
wired up, it's hard for any driver to get the core into a known
good state.

To make it easier for whatever software follows barebox, bring
back the core into a safe state before leaving barebox.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX6: pci: Avoid aborts when asserting PCIe reset ...

When booting Barebox in the HW environment where PCIe core has been
used but not properly shut down, writing to PCIE_PL_PFLR in
imx6_pcie_assert_core_reset would cause data abort exception.

The problem can be easily reproduced on a i.MX6 based board with PCIe
slot populated with some device by doing:

> bootm -f -e 0x1050 <your board's>.img

Ignoring this exception seem to allow PCIe core to successfully
initialize and enumerate devices properly. This is also how Linux
Kernel version of the driver handles this situation -- it installs
dummy no-op abort handler at the beginning of device's probing.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX6: pci: Reconcile imx6_pcie_start_link with the kernel code ...

Reconcile imx6_pcie_start_link with almost identical
imx6_pcie_establish_link from analogous Linux kernel driver. This
change is purely cosmetical, but refactoring the code this way
simplifies implementation comparison.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX6: pci: Replace magic number with a named constant ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_path: Drop possible further extensions of device-path property ...

Originally it was intended to further extend the multi string property
device-path further with more elements, like for example a filename. It
turned out though that this is too complex and instead of further
extending the property we should instead create additional properties,
so this mechanism is removed with this patch to make the code simpler.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fs: automount: Make automountpoints persistent ...

Do not remove the automountpoints when they are mounted. This way
they can be reused when they have been unmounted.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

readline: Fix potential buffer overflow in command history ...

Cursor up copies the last line into the buffer without checking if it
fits into the current buffer. Fix this using safe_strncpy.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

readline: Fix potential buffer overflow ...

cread_add_char doesn't take the trailing '\0' into account, so adding
it at the end of readline can overflow the buffer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

OF: Fix fixups to fix Linux DT instead of Barebox DT ...

OF fixups cm_cogent_fixup() and hb_fixup() are supposed to modify the
Linux device tree.  And they did originally, but commit
e520a8c changed them to use
for_each_compatible_node(), which iterates through the Barebox DT.
Use new for_each_compatible_node_from() to specify the Linux DT root
as the start point.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add of_property_for_each_phandle() iterator ...

This is like of_property_for_each_{string,u32} but loops over a list
of phandles instead of strings or ints.

Returns the node the handle points to as that's generally more useful
than the handle value itself.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add for_each_compatible_node_from iterator ...

The existing iterator for_each_compatible_node() searches for each
compatible node starting from the root of the loaded device tree.
This means it only works on the barebox device tree and not the tree
to be passed to the Linux kernel, which is what an of_fixup would
probably want to use.

This adds for_each_compatible_node_from(), which takes an additional
parameter of a root to search from.  This could be the device tree to
be used for the kernel.  It could also be used to search just a
subtree.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

socfpga: Find partition with environment via device tree ...

socfpga would load the environment from a file named "barebox.env"
located on the device "/dev/mmc0.1".  Both those names are hard-coded
in the socfpga code and can't be changed.

Barebox supports selecting the location of the environment using a
"barebox,environment" node in device tree's "chosen" node.  And
recently supports specifying that the env should come from a file on
this device.

Change socfpga to use this mechanism by adding the appropriate device
node.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: Support env from file in a file-system via device tree ...

Current barebox,environment node only allows specifying a raw device or
partition to load an environment from.  Some boards, like OMAP and
SoCFPGA, instead want to use a file located in a FAT filesystem.
Extend the device tree bindings with a new property 'file-path' that
will trigger this behavior.

This allows any board using this driver to get the env from a file or
from a raw device, instead of each machine type being either raw
device only or file only.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

partition: Create links with partition names ...

When a partition has a name create a link to the original partition
rather than registering a second cdev.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs: Add symlink support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

state: implement signed int support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

input: gpio-keys: implement debouncing ...

The gpio-keys driver often generates multiple events on a single buttong
press. Implement debouncing. The default debouncing time is 20ms and can
be configured with the "debounce-interval" device tree property.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

cdev: When creating a new cdev, initialize device_node ...

If a new cdev doesn't have a device_node defined when passed to
devfs_create(), set it to the device_node of the parent device, if one
exists.

For non-partitions, like ocotp or eeprom devices, this is the correct
thing to do.  Partitions need to use, and do use, a different node.

The code from commit 274e0b8 to set
device_node in ocotp can be removed.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootstrap: constify strings ...

Various parameters for device names, etc.  should be const strings.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

partitions/efi: Add partuuid to partition description ...

In commit bc31d85 the partition UUID
was added to the partition struct and thence to the cdev(s) for the
partition.  But just for DOS partitions.  Do this for GPT aka EFI
partitions too.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of_path: Fix bug with partitions, simply code ...

In commit 75b6827 using a path that
has a partition description broke.

Fix this and simpfy the code some.

There is no need to loop over each string in the path property:  it's
defined to have at most one parition description, no extant dts has
more than one, and how it would handle more than one didn't make sense
anyway.

Once not looping, __of_find_path() just needs the partition
description text, not both the original node and property name to look
it up from.

When using a partition description, don't lookup the cdev of the node
just to replace it with the partition's cdev.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: bcm283x: add rpi2 support ...

This patch adds Raspberry Pi 2 support in barebox. The features should
be the same like the current RPi status in barebox.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

led: add missing includes ...

The led header use some parts which are missing when include the this
header. This patch adds them.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/hwclock: Check return value of rtc_read_time() ...

It is possible for rtc_read_time() to fill struct rtc_time it returns
with invalid values, so we have to check for its return value before
using returned time.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc-lib: Check tm_wday for validity in rtc_valid_tm() ...

RTC drivers rely on rtc_valid_tm() in order to make sure that no bogus
values from uninitialized HW registers get passed to the uppper layers.

A somewhat contrived way to reproduce this problem with DS1307 RTC
would be to do the following:

> i2c_write -b <bus> -a <addr> -r 3 0x00
> hwclock

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc: ds1307: Fix a memory leak ...

Several failure paths would result in control being transfered to
'exit' label, so instead of just returning error codes in those cases
we also need to free the memory allocated for 'ds1307'

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc: ds1307: Add code to support ds1337/1341 ...

Port DS1337 specific bits from corresponding Linux driver and add
small changes needed for DS1341.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rtc: Add Abracon driver ...

This patch adds support for the Abracon ab-rtcmc-32.768khz-eoz9-s3
RTC. The driver can probably support other Abracon RTCs aswell, but this
hasn't been verified.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

hwclock: Allow to set hwclock from sntp ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>