scripts: imx-image: Drop error return from write_dcd() ...

Write_dcd() exits early in case of failure, so there's no realy reason
to have it return a error code as a result. Drop it and simplify the
caller code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: armv8-timer: Make use of postcore_platform_driver() ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: armv8-timer: Make armv8_clocksource_read() static ...

There are no users of that function outside of the driver itself, so
re-declare it as static.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: i.MX: Add missing <soctype> ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Documentation: imx: Change block size for 'dd' to 1024 ...

Real image starts at offset 0x400 (1024), so we can skip copying extra
512 bytes of zeros.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: i.MX: Add support for i.MX8 ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: xload-esdhc: Add support for i.MX8 ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset ...

Add code to support specifying different buffer address and SD/MMC
device offset to read it from in esdhc_start_image(). This change is
needed to support i.MX8.

NOTE: We intentionnaly "emulate" reading at arbitrary offset in
esdhc_start_image() as opposed to implementing it in
esdhc_read_blocks() in order to avoid having to detect if units of
blocks or bytes should be used to specify offset to CMD18.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific ...

Convert imx6_esdhc_start_image() into a generic esdhc_start_image() by
making accept already filled "struct esdhc" as well as use
esdhc_read_blocks().

With that change, create new imx6_esdhc_start_image() whose sole task
is to properly fill a struct esdhc with appropriate offset and to pass
it on to esdhc_start_image().

Both changes are made with a goal of simplifying adding support of new
SoC in mind (see following commits adding support for i.MX8 as example).

NOTE: This commit does not re-implement imx6_esdhc_load_image(),
instead opting for dropping it, due to lack of any users in the
codebase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: boot: Add trivial i.MX8 support ...

It appears that boot sources for i.MX8 are just a subset of those of
i.MX7 and both can be handled by the same code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: boot: Fix address casting on 64-bit platforms ...

Add an intermediary casting step in order to avoid casting 32-bit
integer to 64-bit pointer on 64-bit platforms.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8: Initialize system counter ...

Add code to properly initialize system counter, so it would be posible
to get accurate time delays.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: armv8-timer: Convert explicit assembly into helpers ...

Move inline assembly related to querying and counter value as well as
getting and setting counter frequency register into asm/system.h as
well as converting it inot helper functions. This is done to make the
code availible to other parts of the system.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Add constants and helpers for system counter interface ...

Add constants and helpers for system counter interface as can be found
in section "I1.3 Generic Timer registers" of "ARM Architecture
Reference Manual ARMv8, for ARMv8-A architecture"

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add basic CCM constants for i.MX8 ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Add IOMUX pad constants for i.MX8 ...

Ported from U-Boot

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: Split shared CCM code into a separate file ...

Both i.MX8 and i.MX7 have similar CCMs, so move any code that can be
share into a separate file.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: i.MX: Add i.MX8mq support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mmc: i.MX esdhc: Add i.MX8 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

aarch64: Add i.MX8 debug UART support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Added imx8_uart_setup_ll()]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

serial: i.MX: Add i.MX8 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clock: Add i.MX8MQ clock driver ...

This is based on Lucas' patch sent as "[PATCH v2 4/4] clk: imx: add
clock driver for i.MX8MQ CCM" to the mailing list.

It will likely need some rework before it is finally merged, so apply
the reworks here before merging into barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: Fix pll type for IMX8MQ_VIDEO2_PLL1]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: Make use of IS_ALIGNED ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: Use dma mapping functions ...

Rather than doing DMA on the input buffer address get a proper DMA
address from the mapping functions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: remove unnecessary DMA sync ops ...

The fec receive buffers are coherently mapped, no need to dma_sync on
them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: imx-esdhc: use dma mapping functions ...

Rather than relying on the fact that addresses can be just casted
into DMA addresses use proper DMA mapping functions.

This fixes compiler warnings when we do DMA on this 32bit only device
on aarch64 SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: include: dma: Add missing no-MMU stubs ...

Add stubs for dma_map_single() and dma_unmap_single() that were needed
for no-MMU build for ARM64 to succeed.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Include our own include/dt-bindings ...

Allow to use dt-bindings files that are not yet upstreamed. They can
be put into include/dt-bindings.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: Add i.MX8 support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[andrew.smirnov@gmail.com: fix B0 chips to report IMX_CHIP_REV_2_0]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: compile arm32 specific errata only for CPU32 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>