net: make routing work after dhcp command ...

At the moment only ifup stuff turns netif up.
After the commit f0624a701513 ('net: Do not route traffic
to interfaces that are not up') the dhcp command
keeps netif->ifup == false and network subsystem
can't route packets.

How to repropduce the problem on qemu-malta_defconfig:

    qemu-system-mips -nodefaults -M malta -m 256 \
                     -nographic -serial stdio -monitor null \
                     -bios barebox-flash-image \
                     -net user -net nic,model=rtl8139

    ...

    barebox:/ dhcp
    eth0: 100Mbps full duplex link detected
    eth0: DHCP client bound to address 10.0.2.15
    barebox:/ ping 10.0.2.2
    ping failed: No route to host

However if ifup command is used for network interface
configuration then there is no network problem, e.g.

    barebox:/ ifup eth0
    eth0: 100Mbps full duplex link detected
    eth0: DHCP client bound to address 10.0.2.15
    barebox:/ ping 10.0.2.2
    host 10.0.2.2 is alive

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
CC: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: bypass overlap check for mtd devices ...

For mtd devices the overlap check does not work as expected for two
reasons. First is that cdev->offset is 0 for mtd partitions, instead
cdev->mtd->master_offset has to be used. That could be fixed easily.
Second on NAND devices the environment is on the bb devices and not
on the raw nand devices which means we would need something to get
the mtd device from the bb device before doing the check.

Both issues are fixable, but the check was mainly done to catch cases
when an environment partition is created in the free space before the
first MBR/GPT partition on SD/MMC devices, so leave out the mtd case
for now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: Fix overlapping partitions error message ...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Fixes: b234a6da331f ("environment: Do not use environment when
                      overlapping with other partitions")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubifs'

Merge branch 'for-next/socfpga'

Merge branch 'for-next/ratp'

Merge branch 'for-next/net-imx-fec'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/fs'

Merge branch 'for-next/dts'

Merge branch 'for-next/bbu'

dts: update to v4.19-rc7 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.19-rc6 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.19-rc5 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

dts: update to v4.19-rc3 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Release v2018.10.0 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

digest.h: Sync hash_algo values with kernel ...

enum hash_algo is exported from the Kernel, so sync it with the numbers
that are exported. Since we have barebox specific extensions to the
hash_algo list add a big comment and put the extenstions at the end.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: do not attach already attached UBI ...

in mtd_detect we do not check if the mtd is already attached to UBI. If
it is we get the error:

ERROR: ubi: mtd0 is already attached to ubi0

Check before trying to attach it to avoid this message.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Simplify bbu_find_handler_by_device() ...

Simplify bbu_find_handler_by_device() by making use of
devpath_to_name() as well as some basic recursion to avoid coding the
same loop twice.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: command: Make sure specified update handler exists ...

Add code to verify that update handler specified with either -t or of
-d exists before commencing the update procedure.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Add "handler" parameter to barebox_update() ...

Add "handler" parameter to barebox_update() and remove the code that
was respondible for header lookup before. With this change finding
appropriate handler is caller's responsibility, which makes it
possible to implement custom handler lookup/existence check, chache
it, and then re-use it without calling handler_find_by_* functions for
the second time.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Expose bbu_find_handler_by_*() functions ...

Expose bbu_find_handler_by_device() and bbu_find_handler_by_name() as
public functions and convert the only user of
barebox_update_handler_exists() to use the former function instead.

With this done, barebox_update_handler_exists() is no longer used
anywhere in the code and can be removed.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: Add support for ZII's i.MX7D-based RPU2 board ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX7: bbu: Add I2C and SPI handler ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX7: bbu: Add MMC boot handler ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX7D: DCD: Create shared DDR configuration header ...

Create a shared DDR configuration header based on configuration used
by i.MX7D SabreSD board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: freescale-mx7-sabresd: Make use of imx7d_barebox_entry() ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX: esdctl: Add memory size detection for i.MX7D ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>