show_progress: print spaces with %*s ...

Removes the need for include/linux/stringify.h in the progress
bar code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

libfile: move open_and_lseek() to libfile ...

libfile is a collection of helpers for handling files. open_and_lseek()
is a perfect match for this, so move it there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: move crc specific stuff to crc.h ...

We have a crc.h, so move our crc function prototypes there to further
cleanup common.h.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: move shell prototypes to shell.h ...

We have a shell,h, so move shell specific prototypes there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include/common.h: remove unused struct memarea_info ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

include: move run_command prototype to command.h ...

run_command fits much better into command.h, move it there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c_probe: fix wrong start and stop addresses ...

This patch fixes the wrong range of i2c addresses used by the i2c_probe
command when a stop address is provided. In this case the start address
(startaddr) was taking the value of the stop address and the stop address
(stopaddr) was always set to its default value.

Signed-off-by: Miquel Raynal <raynal.miquel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: tegra: set up stack before calling maincluster entry ...

Allows this code to work correct regardless of the used compiler
optimizations.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: imx-image: Fix image size in flash header for i.MX35 ...

The i.MX35 needs additional 0x1000 byte. This quirk moved to the wrong
location during refactoring of imx-image for v2016.03.0.

Fixes: adade597593442 ""scripts: imx: Allow to create signed images")
Signed-off-by: Daniel Krueger <daniel.krueger@systec-electronic.com>
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

lib: declared buffer is too small to hold string ...

Displaying an unsigned 64-bit integer can be represented by up to 20
characters. The 20 bytes buffer reserved to store the formatted string
"%llu Bytes" is to small: (20 + 6) = 26. Hence, a bigger buffer is reserved
to hold this string.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubifs'

Merge branch 'for-next/ubiformat'

Merge branch 'for-next/rtc'

Merge branch 'for-next/mtd-imx-nand'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx-bbu-nand-fcb'

Merge branch 'for-next/imx'

Merge branch 'for-next/imd'

Merge branch 'for-next/arm'

imx-bbu-nand-fcb: Print error message when out of pebs ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: Make robust against power cuts ...

This patch makes the update to Nand robust against power
failures. With this we make sure that during every step of the
update at least one of the two images on Nand is readable and
valid.

Also this patch makes it possible to refresh/repair the boot
images on Nand. This may become necessary when a previous update
has been interrupted due to a power cut, or when the number of
bitflips is near to the number we can correct. This is also done
in a way that allow power cuts at every step.

We assume the following layout in the Nand flash:

 fwmaxsize = (n_blocks - 4) / 2

 block

 0              ----------------------
                | FCB/DBBT 0         |
 1              ----------------------
                | FCB/DBBT 1         |
 2              ----------------------
                | FCB/DBBT 2         |
 3              ----------------------
                | FCB/DBBT 3         |
 4              ----------------------
                | Firmware slot 0    |
 4 + fwmaxsize  ----------------------
                | Firmware slot 1    |
                ----------------------

When the layout found on the device differs from the above the update
won't be robust, but nevertheless works. Since the layout is changed
to the above during the update, the next update will be robust.

Here's the strategy we use to implement a robust update:

The FCBs contain pointers to the firmware slots in the
Firmware1_startingPage and Firmware2_startingPage fields. Note that
Firmware1_startingPage doesn't necessarily point to slot 0. We
exchange the pointers during update to atomically switch between the
old and the new firmware.

- We read the first valid FCB and the firmware slots.
- We check which firmware slot is currently used by the ROM:
  - if no FCB is found or its layout differs from the above layout,
    continue without robust update
  - if only one firmware slot is readable, the ROM uses it
  - if both slots are readable, the ROM will use slot 0
- Step 1: erase/update the slot currently unused by the ROM
- Step 2: Update FCBs/DBBTs, thereby letting Firmware1_startingPage
          point to the slot we just updated. From this moment
          on the new firmware will be used and running a
          refresh/repair after a power failure after this
          step will complete the update.
- Step 3: erase/update the other firmwre slot
- Step 4: Eventually write FCBs/DBBTs again. This may become
          necessary when step 3 revealed new bad blocks.

Refreshing the firmware which is needed when when blocks
become unreadable due to read disturbance works the same way,
only that the new firmware is the same as the old firmware
and that it will only be written when reading from the device
returns -EUCLEAN indicating that a block needs to be
rewritten.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: Print error when writing blocks fails ...

When writing to a block fails the update handler fails relatively
silent. Print an error message in this case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: When writing firmware return new bad blocks ...

Positive return values of imx_bbu_write_firmware() so far indicate
the last block that has been written to. This value is unused, so
return values > 0 to indicate if there are new bad blocks. This
information can be used in the next step to know if the DBBT has
to be rewritten.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: Only write FCBs/DBBTs when necessary ...

Instead of writing the FCBs/DBBTs on every update write them
only if they have changed or if a block needs cleanup (returns
-EUCLEAN)

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: erase on demand ...

Instead of erasing the whole partition on update entry, erase the areas
separately when we actually want to write them. This is done as a step
towards robust update.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: factor out a fcb write function ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: Use mtd-peb API to write firmware ...

With this patch we verify the firmware written to the NAND and thus
can react on write failures. We torture the block and if it went
bad we mark it as bad.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

imx-bbu-nand-fcb: factor out layout functions ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: export nand_check_erased_buf ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bbu: Allow to refresh/repair images ...

Some SoCs allow to store multiple boot images on a device in order to
improve robustness. This adds a -r option to barebox_update to indicate
we do not want to make an update but instead repair/refresh an existing
image. Handlers which want to support this feature must set the
BBU_HANDLER_CAN_REFRESH flag during registration.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>